Search:

Type: Posts; User: sam1754

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. I drove 100kms, taking luxemburg's highways and...

    I drove 100kms, taking luxemburg's highways and it's really smooth. It seems to work better and better. Traffic sign recognition is very reliable even in working area.

    About VCDS and OBD11, I...
  2. OK, it works! ...

    OK, it works!

    https://image.noelshack.com/minis/2019/42/6/1571475331-img-20191019-094056.png

    I drove about thirty kms and it made a 9 kms dynamic calibration... wait and see.

    Even if traffic...
  3. YES! It's really a question of alltrack routine...

    YES!
    It's really a question of alltrack routine calibration. It calculates camera height from wheel heights housing. So, I put wheels' heights to obtain real camera height from controller routine....
  4. YES, I know VCDS nor OBD11 can change firmware......

    YES, I know VCDS nor OBD11 can change firmware... but I don't know anyone with VCP...:banghead:
    So, you're sure it's a matter of wrong data set? Apart wheel heights, an all track is the same car....
  5. So, I bought an OB11 pro and the procedure has...

    So, I bought an OB11 pro and the procedure has been done with the same issue. So, it's not due to VCDS and now I'm sure VCDS can do calibration.
    But the fact is that I bought a camera from an all...
  6. So, all has been done correctly, as ENtech said...

    So, all has been done correctly, as ENtech said after verifying byte 9 and 21 coding... but always the same issue!
    https://zupimages.net/up/19/41/3j8n.jpg
    I turned it to "clear glass" but same...
  7. I'll take time to see it. Yes, it's a soft...

    I'll take time to see it.

    Yes, it's a soft charger so it takes time to reach 12v but after that it's ok


    I made it 0, moving the steering wheel during calibration.


    What should it mean?...
  8. I found this on RT forum: And said

    I found this on RT forum:


    And said
  9. IDE10664-MAS01632,Current initial calibration:...

    IDE10664-MAS01632,Current initial calibration: details-Status,Installation position incorrect,
    IDE10664-MAS02543,Current initial calibration: details-VIN determined during...
  10. 1) Copy this file to:...

    1)
    Copy this file to:
    C:\Ross-Tech\VCDS\Labels\User
    Use latest VCDS 19.6.2
    I did it with the new file but I don't know what it's for? Can you explain it to me please?


    2) (Maybe not...
  11. I did what you said ( error 37 time delay...

    I did what you said ( error 37 time delay expired) and retryed calibration process and it always return the same fault code: C110A 76 [008] - Wrong mounting position ...
  12. https://zupimages.net/up/19/41/sggg.jpg...

    https://zupimages.net/up/19/41/sggg.jpg
    https://zupimages.net/up/19/41/07dq.jpg
    I waited a long long time after enterting s11111 but it still not accept security access......
  13. Target moved but I have the "ERROR: Request...

    Target moved but I have the "ERROR: Request Sequence Error" message again. And when I go to adaptation menu, the procedure is rejected!!!
    My confidence in VCDS becomes of pluis in smaller. It was...
  14. Ok, I went further... I copied the CLB file saw...

    Ok, I went further...
    I copied the CLB file saw your message when choosing camera calibration but IDE 10403 don't show any new information, just static calibration not done...
    For S11111, it said...
  15. So, All physical adjustements are OK, controlled...

    So, All physical adjustements are OK, controlled many, many times with me and my son. All is correct. Target is really accurate 0.1mm right!
    All is done with laser leveler and I verified with VW...
  16. As I changed the windscreen, fault came back. I...

    As I changed the windscreen, fault came back. I didn't notice it at that time but I knew the need to clear fault codes.
    So, as you and some other users let me ear it's probably sure VCDS won't work,...
  17. After erasing all DCTS, I managed to put right...

    After erasing all DCTS, I managed to put right wheels edge body heights. But it didn't allow me to do it for camera height. It was at 1338 and I wanted to put it at 1318 but it said "request out of...
  18. Hello NETech, my current autoscan is on page 6....

    Hello NETech, my current autoscan is on page 6.
    A5 controller channel map:
    ;SW:3Q0-980-654 HW:3Q0-980-654 --- Frt Sens. Drv. Assist
    ;Component:MQB_B_MFK H04 0010,...
  19. All over the net I found this on every systems...

    All over the net I found this on every systems (VCDS, ODIS, OBD11...)
    A5 controller
    security access 20103
    Basic settings
    1. search target
    2. initial online calibration
    3. static calibration...
  20. Replies
    19
    Views
    9,881

    Anybody can tell me how to do with VCDS, please?...

    Anybody can tell me how to do with VCDS, please? I looked at "basic settings" for A5 module and saw "searching target", I think it's the first thing to do but after that???
  21. Anybody can tell me how to do with VCDS? I looked...

    Anybody can tell me how to do with VCDS? I looked at "basic settings" for A5 module and saw "searching target", I think it's the first thing to do but after that???
  22. The target is printed on Tivek to be re-usable. A...

    The target is printed on Tivek to be re-usable. A friend made a target with solidworks at 1:1 scale to avoid any precision trouble. It cost 90€ but it's a real professionnal work.
  23. Hello, The new windscreen is ordered and the...

    Hello,
    The new windscreen is ordered and the local bodybuilder will do the job.
    For calibration, I'll do it in my garage... it'll take a long long time with many head scratchings!:rolleyes: VW...
  24. Oh it's not a secret:D! I live near Luxemburg....

    Oh it's not a secret:D! I live near Luxemburg. The society who can do calibration is in Auxerre. I agree with you, it's expensive.
  25. Replies
    19
    Views
    9,881

    Yes indeed, I'll use cross laser and weld an...

    Yes indeed, I'll use cross laser and weld an adjustable support like they use at car glass center. And I don't think it'll take only few minutes...perhaps some hours or a whole weekend.:o
    I'm happy...
Results 1 to 25 of 93
Page 1 of 4 1 2 3 4