Search:

Type: Posts; User: DrPeter

Page 1 of 20 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    2
    Views
    77

    Hello, The fault code below, if it does not...

    Hello,

    The fault code below, if it does not clear, would be a good indication there is an internal fault with the J234-Airbag Control Module.

    Based on some more research, this is further...
  2. Thread: ABS probelm

    by DrPeter
    Replies
    2
    Views
    93

    Hello, In the [03-ABS brakes] controller...

    Hello,


    In the [03-ABS brakes] controller there is a Basic Settings [Basic setting of ESP sensor unit] that may help with the two codes for the "Longitudinal Acceleration Sensor" and "Lateral...
  3. Replies
    2
    Views
    118

    Hello, There are a lot of fault codes with...

    Hello,

    There are a lot of fault codes with freeze frame data that indicates the battery voltage is/was below 12V.
    We recommend to use a battery maintainer when clearing codes. I suggest to clear...
  4. Replies
    1
    Views
    114

    Hello, I would suggest to have a look at...

    Hello,



    I would suggest to have a look at the Measuring Value Block (MVB) group [005] in the [42-Door Elect, Driver] controller (J386), to evaluate the switch positions.

    Field (1) = F220...
  5. Replies
    68
    Views
    1,541

    Hello, 17252 - Transmission Fluid Pressure...

    Hello,


    17252 - Transmission Fluid Pressure Adaptation at Limit
    P0868 - 001 - - Intermittent

    If the vehicle has the above fault code, the factory Guided Fault Finding test plan...
  6. Replies
    4
    Views
    160

    Hello, According to my research, if the fault...

    Hello,

    According to my research, if the fault code 03375 does not clear and the power and ground to the J500-Power Steering Control Module are 100% correct, the J500 will need to be replaced as...
  7. Replies
    5
    Views
    181

    Hello, The fault code P0541 will set...

    Hello,




    The fault code P0541 will set when the Natural Vacuum Leak Detection (NVLD) Switch during a 'Functional Check' was found to be "Stuck Close".

    The fault code P0441 will set when the...
  8. Replies
    2
    Views
    242

    Hello, Based on some research, I was able to...

    Hello,

    Based on some research, I was able to find this information:



    This and other useful information can be found in the Official Factory Repair Information

    Hope this helps,
  9. Replies
    7
    Views
    222

    Hi, almost forgot!! You have a lot of the ABS...

    Hi, almost forgot!! You have a lot of the ABS sensors that will need the Basic Settings completed AFTER the Coding is accepted.


    0295 - Steering angle sensor
    B1168 54 [137] - Missing...
  10. Replies
    7
    Views
    222

    Hi there, Your ABS coding should be: ...

    Hi there,

    Your ABS coding should be:
    01FA6BA134250974007F020381C82980D62C9000408194B400430050C009

    Use the "Copy & paste" functions to enter that into the New Coding.

    Hope this helps,
    ...
  11. Replies
    3
    Views
    268

    I was think of mentioning that exact TSB.. ;) ...

    I was think of mentioning that exact TSB.. ;)

    drpeter
  12. Replies
    14
    Views
    528

    Hello, Based on some research in the...

    Hello,

    Based on some research in the www.PartsLink24.com website and the Audi [Self-Study Program 990713 - Audi TT RS with the 2.5L TFSI Engine], the 2013 Audi CEPA 2,5L 5-cylinder engine found...
  13. Replies
    3
    Views
    268

    Hello, Thank you for posting your question,...

    Hello,

    Thank you for posting your question, there is an Audi Self Study Program(SSP) that was published in 2008 by Audi of America, Inc. that will answer a lot of your questions.

    This SSP...
  14. Replies
    4
    Views
    200

    Hi, I agree with Jef, this sounds like an...

    Hi, I agree with Jef, this sounds like an internal ABS Controller fault. The fault code is not on any list any where in any documentation for any Volkswagen product..

    If it was me, I would drive...
  15. Replies
    2
    Views
    322

    Hello, I believe this is only for the...

    Hello,

    I believe this is only for the Injection Pump on 2.5l V6 TDI Engine, I could be wrong, but it does not look like the 2.7L TDI supports this function.

    By the way, did you buy the vehicle?...
  16. Hello, Have a look at the Ross-Tech forum...

    Hello,

    Have a look at the Ross-Tech forum post, linked below.
    The transmission in this post appears to be very similar to the one installed on your vehicle, "Component: DQ250-6F MQB".
    ...
  17. There does not appear to be any documented...

    There does not appear to be any documented security access 'codes' at this time, sorry :(

    It maybe necessary to have someone use the ODIS/Factory scan tool and see if they can 'capture' the...
  18. Hello, In the [61-Battery Regul.]...

    Hello,



    In the [61-Battery Regul.] controller you may want to try the Basic Settings [Reset of reversible crash shut-off].

    Use the [Show Measuring Data] and select [Crash signal]
    - One of...
  19. Replies
    10
    Views
    306

    Hello again, from what I have seen, this can take...

    Hello again, from what I have seen, this can take a while, I have found in the owner's manual the following:



    According to my math, 500 km is about 310.6 miles. So it sounds like you are close,...
  20. Replies
    10
    Views
    306

    Hello, Just to confirm, on the [SRI Reset]...

    Hello,

    Just to confirm, on the [SRI Reset] menu, you did choose [Service Reset] and you did press the [Perform SRI] button at the bottom of the screen?

    https://i.imgur.com/3uENVYI.png

    If...
  21. Hello, The ABS Part number is newer and by...

    Hello,



    The ABS Part number is newer and by VIN it is correct. Based on my research the coding for the ABS control module should be:

    [113B600D49220000881206EB921A00413000]

    Use the...
  22. Replies
    3
    Views
    155

    Hello, The [Output tests]...

    Hello,




    The [Output tests] is what is typically used to 'activate' certain components and the [26-Auto Roof] of the 2004 NB Convertible does not appear to support the [Output tests].

    Just...
  23. Hello, It would appear that there could be a...

    Hello,

    It would appear that there could be a Software update for this fault code in some markets.



    The J217's software version is at [0002], there could be a new version of [0005] or higher...
  24. Replies
    6
    Views
    545

    Hello, After living in Florida and working at...

    Hello,

    After living in Florida and working at the dealerships trying to find water leaks every summer, I have found the best way to narrow down and eventually pinpoint a water leak is to start...
  25. Hi, so when you search for the "R93" in the parts...

    Hi, so when you search for the "R93" in the parts catalog, the one on the [Left] side is displayed, order by VIN, because there are 6-7 different ones (based one equipment, etc)!

    So yes, I would...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4