Search:

Type: Posts; User: pogophil

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Here's the latest scan. After replacing the...

    Here's the latest scan. After replacing the coils and plugs, the engine is still misfiring badly. I Seafoam treated the intake, in case the misfire was due to carbon build up, but no noticeable...
  2. The #8 spark plug looked fine. I will use...

    The #8 spark plug looked fine. I will use electrical cleaner for the coil leads.

    I added Seafoam to a 1/2 tank of gas, hopefully that helps clean out the fuel system, including the injectors. I...
  3. Tons of issues. My current issues: 1) Getting...

    Tons of issues. My current issues:
    1) Getting misfire codes, especially cylinder 8, so I swapped plugs and coils, same result.
    2) Headlights, high beams, blinkers not working. Tested bulbs --...
  4. Latest scan, after nearly a full day of charging...

    Latest scan, after nearly a full day of charging the existing battery:


    Thursday,07,June,2018,16:22:50:01374
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
    VCDS Version:...
  5. New scan (run while charging battery, will...

    New scan (run while charging battery, will replace if necessary)


    Wednesday,06,June,2018,20:35:52:01374
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8.1 x64
    VCDS Version: 18.2.1.2...
  6. Will recharge and rerun tonight. What is an “ADP...

    Will recharge and rerun tonight. What is an “ADP start over?”
  7. You're right. Here's the original scan, with...

    You're right. Here's the original scan, with lots more malfunctions. Presumably, some of these are old, but the car's date was set as 2007 when I first received the car (probably due to low...
  8. Bought a 2008 Audi S6, sight unseen.... (uh oh)

    Hey guys, I just bought a 2008 Audi S6 sight unseen. It came with several issues, of which I was unaware: rough idle, headlights not working, low coolant error message - even when it's full, check...
  9. Replies
    16
    Views
    4,002

    Didn't get the old part, although in retrospect I...

    Didn't get the old part, although in retrospect I probably should have requested it.

    Why do you ask?
  10. Replies
    8
    Views
    1,545

    I believe so. How would I check to confirm?

    I believe so. How would I check to confirm?
  11. Replies
    8
    Views
    1,545

    2008 Audi A6 3.2 quattro HP laptop

    2008 Audi A6 3.2 quattro
    HP laptop
  12. Replies
    8
    Views
    1,545

    License status: valid/activated -- vins used: 2/3...

    License status: valid/activated -- vins used: 2/3
    win 8
    hex-v2 cable
  13. Replies
    16
    Views
    4,002

    Needed a new ECU, one of the pins was shorted...

    Needed a new ECU, one of the pins was shorted out. $2k cost to fix.
  14. Replies
    8
    Views
    1,545

    This Function Requires a Licensed Interface

    I was trying to do the throttle body alignment today, and got this message. Can someone please point me in the right direction?
  15. Replies
    9
    Views
    1,555

    I'm having the same issue, but no luck yet:...

    I'm having the same issue, but no luck yet:
    http://forums.ross-tech.com/showthread.php?13984-2008-Audi-A6-No-crank-no-start
  16. Replies
    16
    Views
    4,002

    Ok.... piecing together some info: Location of...

    Ok.... piecing together some info:

    Location of keyless entry antenna: https://www.audiworld.com/forums/q5-sq5-mki-8r-discussion-129/keyless-entry-antenna-location-2897015/
    Keyless entry antenna...
  17. Replies
    16
    Views
    4,002

    Also, if it's water, should it dry out after a...

    Also, if it's water, should it dry out after a while in the garage? If so, I should be able to start it after dry.
  18. Replies
    16
    Views
    4,002

    Thanks Jack -- I had to Google what Kessy was, so...

    Thanks Jack -- I had to Google what Kessy was, so I could start to understand your post.

    Help me understand -- where is the Kessy? Where should I inspect for water leaks into Kessy?
  19. Replies
    16
    Views
    4,002

    It did happen again - ugh! A bit different this...

    It did happen again - ugh! A bit different this time, as the dash is on now (previously it stayed off even with the key in).

    Here is the new scan -- note the engine codes for starter control and...
  20. Replies
    16
    Views
    4,002

    It did happen again - ugh! A bit different this...

    It did happen again - ugh! A bit different this time, as the dash is on now (previously it stayed off even with the key in).

    Here is the new scan -- note the engine codes for starter control and...
  21. Replies
    16
    Views
    4,002

    For anyone with this issue in the future: Go...

    For anyone with this issue in the future:

    Go to 05-Acc/Start Auth
    Read Codes
    Erase Codes

    Once I did this my car clicked to life, and I was able to start it no problem. I was able to turn it...
  22. Replies
    16
    Views
    4,002

    2008 Audi A6 -- No crank, no start

    My 2008 Audi A6 isn't responding to the key when I try to start the car. I turn the key, and the dash stays off, but the MMI turns on. It may be the ignition module reset or replacement is needed,...
  23. Replies
    6
    Views
    29,756

    Thanks guys. Just for documentation purposes: ...

    Thanks guys. Just for documentation purposes:

    1) Confirmed I was pointing to the correct version
    2) Confirmed the USB port wasn't dead -- I switched it to each of my ports and had the same issue...
  24. Replies
    6
    Views
    29,756

    It was red

    It was red
  25. Replies
    6
    Views
    29,756

    Port Status OK, Interface Not Found

    Hi, I sent this to support, but also posting here in case there's quicker response..... it is the weekend.

    I'm trying to use my VCDS with my 2008 Audi A6 3.2 quattro. I just updated from v17.3...
Results 1 to 25 of 30
Page 1 of 2 1 2