Search:

Type: Posts; User: darkchina811

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    1
    Views
    2

    no you can't, buttons coding is fixed and cannot...

    no you can't, buttons coding is fixed and cannot be changed.

    it is advised to replace buttons with the same exact part number.
  2. following Xagico PDF about the inverter retrofit,...

    following Xagico PDF about the inverter retrofit, he enabled two bits with ODIS-E. the two bits I enabled have the same name in experimental coding.

    will try disabling. I am not sure what you said...
  3. I separated the limit switch wires and the LED...

    I separated the limit switch wires and the LED turned off. so I guess it goes red when there is something wrong.

    anybody with a Golf Wagon / Passat / Tiguan that can share the relevant car...
  4. did you also install the steel cage for the...

    did you also install the steel cage for the engine control unit?
  5. this morning I scanned the car again and last...

    this morning I scanned the car again and last night the gateway flagged a DTC, "QUIESCENT CURRENT TOO HIGH", so I assume it would be better to restore the limit switch :) but I will wait for the...
  6. here in Italy we have a common saying that sounds...

    here in Italy we have a common saying that sounds a bit like "mother of dumbs and asshoXXXX is always pregnant"...
  7. not at all, but it will be convenient and useful....

    not at all, but it will be convenient and useful. also, you basically don't see it unless you put your head down there and look for it.
  8. my bad, I edited the post. thank you.

    my bad, I edited the post. thank you.
  9. updated autoscan after DC/AC power inverter...

    updated autoscan after DC/AC power inverter retrofit :)



    Sunday,02,August,2020,21:20:41:06888
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 20.4.1.0 (x64) ...
  10. DC to AC power inverter retrofit on Golf 7

    I have had the need in the past to charge my MacBook while being around, and Apple never released a car adapter. so I decided to retrofit the OEM inverter in the car, as it may come handy for...
  11. Replies
    8
    Views
    351

    thank you Don, I kinda get it. so SERVICE would...

    thank you Don, I kinda get it. so SERVICE would be just an oil change and INSPECTION the full thing with air/cabin filters as well?

    I now guess ESI is Extended Service Interval but I haven't...
  12. Replies
    8
    Views
    351

    since the title of the thread is not car...

    since the title of the thread is not car specific, I will append here. this is actually something I have wanted to ask since some time. below is my SRI reading, as of today:


    ...
  13. Replies
    19
    Views
    544

    there is no retrofit on the Golf which will...

    there is no retrofit on the Golf which will require different front ABS sensors, those are not your problem.
  14. updated autoscan after rear camera upgrade from...

    updated autoscan after rear camera upgrade from LOW to HIGH :)



    Wednesday,22,July,2020,23:15:51:06888
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 20.4.1.0...
  15. https://www.drive2.com/l/506405644891324874/ I...

    https://www.drive2.com/l/506405644891324874/

    I didn't because somebody else did of course :) here you go, you'll notice how the fixing for the cameras on the rear are different, and that is where...
  16. I reached out to my friend today and installed...

    I reached out to my friend today and installed the 568 A camera into the badge. loaded parameters with the other tool and calibration was successful at first attempt. now I got zero errors so I...
  17. it's a single cone, dual-coil speaker. inspect...

    it's a single cone, dual-coil speaker. inspect all solder joints with a magnifying glass, especially for the silver wires which dive into the cone.

    there could be micro cracks who actually make...
  18. now I have been home for a while, but I forgot....

    now I have been home for a while, but I forgot. I'll get back to you soon.
  19. Replies
    4
    Views
    208

    here is what I used on old cars to implement...

    here is what I used on old cars to implement Daytime Running Lights (they are on with engine on ONLY), of course it can be adjusted for any load.
    ...
  20. Replies
    4
    Views
    108

    howdy ;) (eccolo!)

    howdy ;)

    (eccolo!)
  21. I got the 568 B camera and easily downgraded to A...

    I got the 568 B camera and easily downgraded to A index with ODIS-E, the flash file is on the erwin flash disc.

    the camera has no parameters and I need to meet with my friend again, he's got the...
  22. yes, the friend who helped me had the same...

    yes, the friend who helped me had the same theory, calibration is not possible because dataset is wrong. but there is no file for 555 B on Golf. so we used Passat file...

    I read your post four...
  23. haha I was looking for a path to a solution, not...

    haha I was looking for a path to a solution, not to introduce other variables which would rather complicate things :)

    the 568 B camera is coming anyway, I'll see what happens with that one.
    ...
  24. can you post a full autoscan so I see coding for...

    can you post a full autoscan so I see coding for other modules as well? also, what file did you use for parameters to load with the other tool?
  25. small update: 5Q0 980 556 was superseded by A...

    small update: 5Q0 980 556 was superseded by A index, then B. ETKA says they are only compatible with Audi but they are also mounted on other cars, like downtime's Tiguan. it's the same as the Golf,...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4