Search:

Type: Posts; User: langers2k

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    3
    Views
    73

    The 1K0 907 379 BL in my car certainly supports...

    The 1K0 907 379 BL in my car certainly supports XDS and I'm sure that adaption channel is available once it's been enabled :)
  2. Other tools will allow EEPROM access so with some...

    Other tools will allow EEPROM access so with some experience and a wiring diagram, you can normally generate something close, if not identical to the stock config :)
  3. If byte 18 was originally 00, then it might not...

    If byte 18 was originally 00, then it might not be possible to restore the original lighting config using VCDS.

    Where in the UK are you?
  4. A few of us can probably come up with something...

    A few of us can probably come up with something close to the stock lcode but you'll need to post an autoscan to confirm what modules the car has :)
  5. At a guess, the stock coding was probably similar...

    At a guess, the stock coding was probably similar to:
    133B401C09280000C81202EB902200823400

    However, based on the capabilities of the module I'd use one of these:...
  6. Rear sensor is super easy :) Here is my rear...

    Rear sensor is super easy :)

    Here is my rear suspension after I added the five rivnuts:
    https://www.briskoda.net/forums/uploads/monthly_03_2016/post-121621-0-35799800-1457638912.jpg

    Then with...
  7. Your AFS slaves which are connected to the...

    Your AFS slaves which are connected to the headlights are correct (7L6 941 329 B) so the dealer has sold the correct parts.

    5M0907357C would be the AFS master so isn't attached to the headlights....
  8. I'd agree with the above, pretty sure the Octavia...

    I'd agree with the above, pretty sure the Octavia only ever got 5M0 907 357 C modules rather than 5M0 907 357 D.

    If you do replace it, try and get one with SW:0148 rather than SW:0142 :)
  9. Chassis Type: 1Z-SK35 (7N0) is a MK2 facelift...

    Chassis Type: 1Z-SK35 (7N0) is a MK2 facelift Octavia not a MK3, might be worth getting the thread title updated to avoid confusion.

    I'd start by checking the ECU coding, as Dave mentioned it...
  10. You might want to post an autoscan now it's...

    You might want to post an autoscan now it's fixed. If nothing else, it might help others or even yourself in future :)
  11. If the AWD module has been checked, you should...

    If the AWD module has been checked, you should now check the wiring to it as most modules don't seem to be communicating with it.

    You can get the wiring diagrams from erwin and at a guess, I'd...
  12. Replies
    9
    Views
    277

    Did a quick google and found a few scans with...

    Did a quick google and found a few scans with identical modules with faults that look to be folding mirror related:
    - https://vwforum.ro/topic/41312-oglinzi-passat-b6/?do=findComment&comment=2323027...
  13. Replies
    9
    Views
    277

    It's two different issues Rhinopower. - Kamold...

    It's two different issues Rhinopower.
    - Kamold is talking about direct editing of the door controller EEPROM to add 'comfort folding' on a vehicle which already has working folding mirrors.
    - Your...
  14. Replies
    9
    Views
    277

    The factory fitted RHD gen3 max modules certainly...

    The factory fitted RHD gen3 max modules certainly can as I retrofitted folding mirrors to my Octavia.



    Address 42: Door Elect, Driver Labels:. 1K0-959-701-MAX3.clb
    Part No SW: 1T0...
  15. Not sure what byte 04/12 is :/ As for byte...

    Not sure what byte 04/12 is :/

    As for byte 06/14, I think that's been 00 on every scan I found for an Octavia. Never seen any guidance apart from the 2 stage ESP off tweak that's popular.

    I'd...
  16. Replies
    32
    Views
    1,067

    The original MK70m coding is completely different...

    The original MK70m coding is completely different to the MK60EC1 so adding 00 won't help.

    I collected as many autoscans as I could find online for other similar cars, based on that info and a...
  17. Replies
    32
    Views
    1,067

    I did a MK70M to MK60EC1 swap on my Octavia...

    I did a MK70M to MK60EC1 swap on my Octavia (similar to a MK6 golf) which was pretty simple. It only needed the ABS connector/pump/mount changing, an additional power feed, brake fluid bleeding and...
  18. Are you sure that lcode for the ABS unit is...

    Are you sure that lcode for the ABS unit is correct and didn't show that fault previously?

    I found some other AWD Octavia scans from other members:
    133B401C0A2900FDC81402E9501B0082350000 < Tinbum...
  19. In short, yes :) There is basically a car...

    In short, yes :)

    There is basically a car phone inside modules that support 'Premium BT'. By using rSAP, it effectively remove the SIM card from the mobile phone and plugs it into the car phone....
  20. No stock iPhone supports rSAP and therefore won't...

    No stock iPhone supports rSAP and therefore won't support 'Premium BT' or the WiFi hotspot :)

    It's possible your friend had a jailbroken iPhone as this thread suggests that may make rSAP possible:...
  21. What phone are you using and is it connected...

    What phone are you using and is it connected using rSAP/Premium BT?

    I can't be sure but you might only get the WiFi option after connecting a suitable phone via rSAP.
  22. Replies
    3
    Views
    281

    This might help:...

    This might help: https://forums.ross-tech.com/showthread.php?17417-MK100-ABS-Coding
  23. Replies
    2
    Views
    214

    From the hex-net device page :) WiFi...

    From the hex-net device page :)

    WiFi Requirements:

    To use the HEX-NET wirelessly, it needs to communicate via 802.11 b/g at 2.4 GHz. This means that for Access Point mode, the client device...
  24. Replies
    12
    Views
    625

    Or even find a local VCDS owner who's able to do...

    Or even find a local VCDS owner who's able to do a scan for you.

    Various car forums have owners lists or maps which should help you find someone :)
  25. Replies
    6
    Views
    225

    Will travel mode be sufficient for permanent use?...

    Will travel mode be sufficient for permanent use?

    I didn't think it changed the beam pattern/cutoff from RHD to LHD (or vice versa) but simply lowered the lights slightly and pointed them away...
Results 1 to 25 of 188
Page 1 of 8 1 2 3 4