Search:

Type: Posts; User: tuningbyamg

Page 1 of 6 1 2 3 4

Search: Search took 0.01 seconds.

  1. Disconnect plug coming from handle completely,...

    Disconnect plug coming from handle completely, there is an antenna and button for locking, if you unplug it it should still work. I've unplugged mine from all 4 doors to make sure it doesnt work,...
  2. Thx guys, VW also confirmed these modules are...

    Thx guys, VW also confirmed these modules are coded once and to the index of the vehicle, also what determines what's installed on the car
  3. Picked up a 3D0909601D from a 2004 Touareg same...

    Picked up a 3D0909601D from a 2004 Touareg same engine (well 3.2 Gas), same options as in no occupancy sensor etc.
    Still coding doesn't match.
    On ebay sellers are saying only to match part number,...
  4. Wow this sucks, and hex value is nowhere to be...

    Wow this sucks, and hex value is nowhere to be known besides when buying it new and on the box?
  5. Need help coding Touareg 7L 2007 Airbag Module

    Hi guys,

    Trying to swap out the airbag module with same part number and it will not accept coding from 0012360 to 0012375
    I'm getting Error 22" Conditions not correct or request sequence error
    ...
  6. haha these snakes at VW....

    haha these snakes at VW....
  7. Not sure what you mean by de-tuned. to my...

    Not sure what you mean by de-tuned. to my knowledge truck is stock, nothing's being reprogrammed.
  8. What about the value in measuring block 007 value...

    What about the value in measuring block 007 value 3? What is this reading?
  9. I've had the chance to deal with a similar issue...

    I've had the chance to deal with a similar issue when plasma was chipping away on the cylinder wall, compression was below 300psi
    In that instance or when its a compression issue, there is visible...
  10. Puzzling misfire on V10 TDI BKW in Touareg

    Hey everyone,

    I'm very puzzled by an issue that just surfaced on my dad's 2004 V10 TDI Touareg, it only seems to happen when engine is warmed up.
    Definitely felt engine shuddering (feels like...
  11. Replies
    8
    Views
    500

    how do i get rid of this basic setting code? I'm...

    how do i get rid of this basic setting code? I'm this _ close to turning off this piece of crap system all together...
  12. Replies
    8
    Views
    500

    It did pick up more than one sensor before, no...

    It did pick up more than one sensor before, no water in where this controller is, its above the left battery which i recently had to change also.
    The malfunction message appeared when i changed...
  13. Replies
    8
    Views
    500

    Here's what she's got, it seems i'm getting less...

    Here's what she's got, it seems i'm getting less and less sensors getting recognized.
    What is condition #4 on all wheels (channels 26 & up)?



    ;SW:3D0-907-273-C HW: --- Tire Pressure...
  14. Replies
    8
    Views
    500

    ok so i'm a bit puzzled, i have played around...

    ok so i'm a bit puzzled, i have played around until i can get 5 working tpms sensors that i know are good and verified with an Autel TPMS reader, i get 5 different ID's readings etc to each...
  15. Trims are very close to 0, add and mult, i think...

    Trims are very close to 0, add and mult, i think highest i've seen is 0.19
  16. Hey guys, Final update on this issue, it would...

    Hey guys,
    Final update on this issue, it would appear the MAF imbalance is by design, the ECU computes the sum of both readings in another field of the measuring blocks.
    My rich codes, i did check...
  17. Well here are those codes now. No CEL...

    Well here are those codes now.

    No CEL displayed, but they are stored. Intermittent? Wow...

    Monday,10,September,2018,16:45:25:44955
    VCDS Version: Release 18.2.1 (x64) Running on Windows 7 x64...
  18. VCDS -- Windows Based VAG/VAS Emulator Running on...

    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 18.2.1.2 (x64)
    Data version: 20180518 DS287.1
    www.Ross-Tech.com


    VIN: WVWAF63D348009576 License Plate:

    ...
  19. Phaeton 3D, Running Rich code, maf 1 vs 2 imbalance

    Hi all,

    Just wondering if what i'm seeing is normal on this V8 4.2
    It has 2 air filter boxes on on each side with the MAF on it.
    Group 2 measuring block fields 3 and 4 read 7.18g/s and 3.59g/s...
  20. Replies
    8
    Views
    500

    Phaeton 3D, TPMS issue

    Hey guys,

    Need to understand the order of sensor monitoring on Address 65 for the TPMS module on this car
    2004 Phaeton
    I have measuring blocks 001 to 016 which represent the 4 sensors but in...
  21. Replies
    10
    Views
    954

    Ok boys, so checked the ground point for both...

    Ok boys, so checked the ground point for both fans, didn't see any reason for concern there, tested after a cleanup and reinstall, same situation both not working.
    So then I unplugged fan module 1...
  22. Replies
    10
    Views
    954

    Yes that is one thing i have possibly overlooked,...

    Yes that is one thing i have possibly overlooked, i saw this ground 642 in the manual, will follow it through to see if its not damaged anywhere.

    Thanks again and I will post findings soon
  23. Replies
    10
    Views
    954

    Sourced a used pair of fans and controllers same...

    Sourced a used pair of fans and controllers same year and model Phaeton, for only 30$ :D
    will update once i try them
  24. Replies
    26
    Views
    1,509

    Yikes, you were not getting a code for the hall...

    Yikes, you were not getting a code for the hall sender sensor?
  25. Replies
    26
    Views
    1,509

    @Jack chillout man it's just a ground, I've also...

    @Jack chillout man it's just a ground, I've also worked on many V10's including block swaps and what not, "WITHOUT" the proper tools, or shall i say i made my own tools?
    Does that make me an idiot...
Results 1 to 25 of 130
Page 1 of 6 1 2 3 4