Search:

Type: Posts; User: siLc

Page 1 of 19 1 2 3 4

Search: Search took 0.02 seconds.

  1. From the scan, engine code is CDAA, which is 1.8...

    From the scan, engine code is CDAA, which is 1.8 TSI, not 2.0 TFSI. Pretty much the same engine though. Perhaps HPFP faulty?
  2. Replies
    10
    Views
    244

    Perhaps first step is to find out from which...

    Perhaps first step is to find out from which donor car the gearbox is from and/or the gearbox code, in order to find out it's gear ratios. If the markings on the bell housing are ground down, then...
  3. Replies
    10
    Views
    244

    If no gearbox in scan, then its usually a manual...

    If no gearbox in scan, then its usually a manual box :)

    Factory gearbox code (3 letters) can be found from the vehicle data sheet near spare wheel in trunk and beginning of service handbook. The...
  4. There are so many faults in the "new" steering...

    There are so many faults in the "new" steering rack I would clear all faults and see what reappear...and post an autoscan with English-language VCDS.

    If the new rack is good, it would be...
  5. Replies
    13
    Views
    312

    Are the seats fully electric? From the factory,...

    Are the seats fully electric? From the factory, these have their own diagnostic addresses 06 and 36. Since these are completely missing in your autoscan, I'd presume these seats are retrofitted at...
  6. This just sounds like a simple coding issue with...

    This just sounds like a simple coding issue with the BCM or SWCM. Check the measuring blocks of SWCM (module 16) of what the SWCM is seeing while you're manipulating the indicator stalk to engage and...
  7. Please expand on how the halogen high beams do...

    Please expand on how the halogen high beams do not work as intended.

    As for relays, the lighting on this model is fully digitally controlled in the BCM - no relays.
  8. Replies
    2
    Views
    102

    Windows won't work from door switches unless the...

    Windows won't work from door switches unless the ignition is on but the fault in SWCM implies the window modules might not know if the ignition is indeed on.

    According to the info at hand,...
  9. Replies
    8
    Views
    224

    Module 09 is not known as "comfort module", but...

    Module 09 is not known as "comfort module", but CECM (central electric control module). If you installed a midline CECM instead of previous highline CECM, you can't front fogs to work unless you...
  10. https://www.kufatec.com/en/volkswagen/vw-passat/pa...

    https://www.kufatec.com/en/volkswagen/vw-passat/passat-b8-3g/adapter-for-led-to-led-with-cornering-light-for-vw-passat-b8-42225 <- this adapter?

    High LED headlights have CAN between the lights and...
  11. Thread: AFS wiring

    by siLc
    Replies
    8
    Views
    179

    What is the part number of the AFS module? I...

    What is the part number of the AFS module?

    I wouldn't be so sure the CAN gateway even supports the Extended CAN. So having wired the AFS into CAN pins 7 and 17 - were the pins vacant? If yes, then...
  12. Thread: AFS wiring

    by siLc
    Replies
    8
    Views
    179

    Look closer, this vehicle is the older PQ...

    Look closer, this vehicle is the older PQ platform Tiguan - no footwell connection point in those :)

    Someone omitted an important detail from the schematic. See the *5 in the AFS module CAN...
  13. 9977 or higher is a good indication of the fix...

    9977 or higher is a good indication of the fix being applied.
  14. Replies
    59
    Views
    4,338

    For B7 and 1K8 919 472C, you don't need to change...

    For B7 and 1K8 919 472C, you don't need to change sensors.

    Post a complete autoscan and admap of Discover Media PQ.
  15. No problem! For DM PQ, start with changing the...

    No problem!

    For DM PQ, start with changing the CAN gateway out with version at least 7N0907530BC. Simply buying a vanilla DM PQ won't get you anywhere - Component Protection will kick in after 8...
  16. Factory location for amplifier is under the...

    Factory location for amplifier is under the driver's seat. If you are planning on upgrading the radio eventually to Discover Media PQ, get the 3AA035466 model of Dynaudio amplifier, which is...
  17. Replies
    30
    Views
    649

    Properly retrofitting factory xenons is a far...

    Properly retrofitting factory xenons is a far more involved process than simply replacing the lights and connecting them with plug adapters. For reference, here's what looks like a pretty good guide...
  18. Yes, the TPMS position is exactly the same. I...

    Yes, the TPMS position is exactly the same. I have the same CNG model and have done this retrofit.

    Lower steering column trim with CCS is part number 3C0858559J 1QB.
  19. Replies
    11
    Views
    561

    I wouldn't trust the date given by the fault. As...

    I wouldn't trust the date given by the fault. As far as I know, only a few models keep track of the actual date and mostly display a random date in DTC info. Time of day can be trusted though :)
    ...
  20. AFAIK you don't have to change the steering wheel...

    AFAIK you don't have to change the steering wheel controller if you already have normal cruise and steering wheel buttons. Only the stalks with ACC buttons will suffice.

    TPMS module is installed...
  21. Replies
    4
    Views
    161

    You posted your old radio admaps in another...

    You posted your old radio admaps in another topic. Please ignore my post there and post your old and new radio admaps here.
  22. Also post a full unedited autoscan and admap of...

    Also post a full unedited autoscan and admap of the MIB2.5.
  23. Replies
    11
    Views
    561

    Apparently the BCM "sees" the steering wheel...

    Apparently the BCM "sees" the steering wheel buttons fine but does seem to require coding for the buttons to work...
  24. Replies
    7
    Views
    289

    1. Does the engine timing chain rattle on cold...

    1. Does the engine timing chain rattle on cold startup?

    Please post a full unedited autoscan.
  25. Pedestrian detection is only with 3Q0980653...

    Pedestrian detection is only with 3Q0980653 camera.
Results 1 to 25 of 464
Page 1 of 19 1 2 3 4