Search:

Type: Posts; User: Bozwhizzle

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Can you guys please take a look at my latest...

    Can you guys please take a look at my latest scan. I replaced the rear left abs speed sensor.
    Still getting hung up on pressure pedal test(046-053) and will not make any progress. Please let me...
  2. So when I did the brake bleed through vcds the...

    So when I did the brake bleed through vcds the abs pump runs. I have not tried the output test yet. I will try that and see if it stores any other codes.
    Thanks for the reply!
  3. SO I have cleared all the dtc's in each...

    SO I have cleared all the dtc's in each individual group, then performed the basic settings needed from coding abs module on up to the basic settings for intake unite valve and keep getting stuck....
  4. Any ideas on why it would keep getting stuck on...

    Any ideas on why it would keep getting stuck on that particular brake pressure test?
    Thanks
  5. May I will try what you suggest. My problem seems...

    May I will try what you suggest. My problem seems to be the engine bay getting too hot and only being able to get part way through the brake test, hydraulic unit valve section.
  6. Just ran a new scan and now 00003 appears? ...

    Just ran a new scan and now 00003 appears?


    Friday,31,January,2020,16:37:54:19969
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.2.0 (x64) HEX-V2 CB:...
  7. Here is my latest scan. It looks like I do nbot...

    Here is my latest scan. It looks like I do nbot have the 00003 code and do not need to perform basic settings for hydraulic unit? Just move on to the next?

    Thanks

    ...
  8. So I have gotten through a few sections and now I...

    So I have gotten through a few sections and now I am stuck on one.

    Hydronic Unit Intake Valve
    Ive gotten through the first part - (116-123) press the pedal and hold then I get the (46-53) range...
  9. I have not. Thanks I will try it!

    I have not. Thanks I will try it!
  10. So I istalled the new abs module with matching...

    So I istalled the new abs module with matching numbers...its accepted the coding right away. I bleed the brake system and then went into vcds - block 3 abs and performed the brake bleed from there...
  11. So then I should be able to enter the original...

    So then I should be able to enter the original long coding, workshop #....Ext that the original module had to re-code the new one?
  12. Okay thanks guys! I really appreciate the help!

    Okay thanks guys! I really appreciate the help!
  13. So I did find an exact number match for an abs...

    So I did find an exact number match for an abs module.
    Should it also need to be re-codes it more like a plug n play situation?
  14. So if I look for another abs module does it need...

    So if I look for another abs module does it need to have the exact same #1KO 907 379 BJ...?
    Or do the last letters BJ need to be the same?
    I found another abs module with the #8KO 907 379 BJ...
  15. Just wanted to follow up on this. Where should...

    Just wanted to follow up on this.
    Where should I type in this information, workshop code and number of the device? On VCDS or send it to you here?
  16. Type them into VCDS in the ABS brakes section? ...

    Type them into VCDS in the ABS brakes section?
    Or send info to you?
  17. The only things that was changed is the abs...

    The only things that was changed is the abs module. Instrument panel is original.
    I sent an email to ECS Tuning where I purchased the new abs module. What do you are my options at this point?
  18. So you think I have the wrong abs module for this...

    So you think I have the wrong abs module for this car?
  19. I went back through and tried all the codes...

    I went back through and tried all the codes provided adding the WCS, Importer and Equipment #'s... still a no go? Any ideas?

    Do you need any info from either the old abs module or the new one?
  20. here is the updated scan. ...

    here is the updated scan.


    Monday,30,December,2019,17:20:16:19969
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.2.0 (x64) HEX-V2 CB: 0.4508.4
    Data...
  21. So I went back and tried to enter each code again...

    So I went back and tried to enter each code again also adding the work shop # 06314 they are all rejected. Still not coding properly.

    Do you need an updated auto scan?
  22. The last one did not work either. Just to make...

    The last one did not work either.
    Just to make sure I am doing this correctly...
    Open VCDS, go to Select Control Module - 03 - ABS Brakes - Coding 07 - New Coding then enter new code in space...
  23. Unfortunately the last two codes that you sent...

    Unfortunately the last two codes that you sent were rejected.

    Here is the latest auto scan after my attempts...


    Sunday,29,December,2019,09:17:28:19969
    VCDS -- Windows Based VAG/VAS Emulator...
  24. Latest s auto scan after I tried the code you...

    Latest s
    auto scan after I tried the code you sent me.


    Friday,27,December,2019,18:20:42:19969
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.2.0 (x64) ...
  25. Yes I do not have an auto scan from before the...

    Yes I do not have an auto scan from before the swap.
    The original long code for the abs module before swap is the following:
    1150400F49280001880B02E892200042BF0C00

    When I enter the first long...
Results 1 to 25 of 28
Page 1 of 2 1 2