Search:

Type: Posts; User: DrPeter

Page 1 of 20 1 2 3 4

Search: Search took 0.05 seconds.

  1. Replies
    1
    Views
    47

    Hello, You may need to drop the...

    Hello,

    You may need to drop the engine/transmission. If the vacuum lines behind the engine/on top of the transmission have never been replaced, this could be a source for vacuum leaks.

    When...
  2. Replies
    3,404
    Views
    1,149,066

    Hi, hope everyone is doing well... Do not know if...

    Hi, hope everyone is doing well... Do not know if this was posted here before.. perhaps an old one, but still makes me laugh..

    https://i.imgur.com/ImudEBM.jpg


    Have a good Friday/weekend!
    ...
  3. Replies
    1
    Views
    82

    Hello, The H12 is actually an electronic...

    Hello,

    The H12 is actually an electronic siren, not a simple horn (3 wire vs. 2 wire). Typically on the A3's it is located in the rear area of the front right wheel housing.

    You can perform...
  4. Replies
    8
    Views
    110

    I concur with Ntech, the J104-ABS Controller...

    I concur with Ntech, the J104-ABS Controller coding should be [0003365] with the base engine [T74].

    drpeter
  5. Thread: Valvelift GTI

    by DrPeter
    Replies
    1
    Views
    53

    Hello, That is a long shot! :) - Can it be...

    Hello,

    That is a long shot! :) - Can it be done.... sure... Given enough time and resources... you could do it.

    Audi valvelift system (AVS) is not simply added on to a Volkswagen by coding...
  6. Replies
    25
    Views
    656

    Hello, You know, we have a Ross-Tech wiki page...

    Hello,

    You know, we have a Ross-Tech wiki page for the ABS fault code 02214 - Tire Pressure Warning and it mentions the "System Rest" or also known as the "Tire Pressure Monitoring System (TPMS)...
  7. Replies
    2
    Views
    87

    Hello, I agree with PetrolDave. :) - You...

    Hello,

    I agree with PetrolDave. :) - You should verify what Audi says and I may take it a step further if you did not find anything obvious. You may have to loosen and re-torque ALL the suspension...
  8. Replies
    1
    Views
    78

    Hello, Based on some research, it would...

    Hello,

    Based on some research, it would appear the ABS Coding should be [0019073].

    After the Coding is accepted, check and clear codes, it maybe necessary to perform the Basic Settings, see...
  9. Hello, I would check the timing chain...

    Hello,

    I would check the timing chain tensioner. There is a plastic cover on the timing chain cover/case that can be removed to inspect the position of the adjuster.

    This is my 2.0L with...
  10. Replies
    2
    Views
    121

    Hello, If you have not already done so, have...

    Hello,

    If you have not already done so, have a look at the Measuring Value Block (MVB) group [001] for the Compressor Shut-Off Code.
    VCDS will display the numerical value that the J255-Climatic...
  11. Replies
    2
    Views
    147

    Hello, The best $35 ever spent with Audi ... ...

    Hello,

    The best $35 ever spent with Audi ... Official Factory Repair Information

    You can have 24 hour access, complete wiring diagrams, component locations, repair manuals, body repair, TSBs...
  12. Replies
    1
    Views
    110

    Hello, Personally, I have not seen a "fuel...

    Hello,

    Personally, I have not seen a "fuel manifold" fail on a BLV-3.6l engine. I have seen the brass "pressure limiting valve" [03C 103 363 H] fail and cause fuel rail pressure concerns. That...
  13. Replies
    1
    Views
    121

    Hello, The coding of the [09-Cent. Elect.]...

    Hello,

    The coding of the [09-Cent. Elect.] (J519) does not appear to be able to code out the reverse lights functions. The expected coding for this vehicle's (J519) seems to be [20003]. The...
  14. Hello, Here is an easy way to tell if you...

    Hello,

    Here is an easy way to tell if you have an "Immobilizer 4 - Adaptation" or an "Immobilizer 4 - Challenge system".


    Address 25: Immobilizer Labels: 1K0-920-xxx-25.clb
    Part No...
  15. Replies
    9
    Views
    305

    Hello, Interesting.... Glad the coding was...

    Hello,

    Interesting.... Glad the coding was accepted. You actually should consider upgrading to a newer Ross-Tech interface because....

    [New feature! Extended UDS fault detail is only supported...
  16. Thread: AUDI A8 2015

    by DrPeter
    Replies
    2
    Views
    144

    Hello, - Sounds like you may want to check...

    Hello,



    - Sounds like you may want to check the N80-Canister Purge Valve and make sure you do not have raw fuel or too much fuel vapor entering into the intake manifold causing a...
  17. Replies
    9
    Views
    305

    Hello, If the above does not work, please try...

    Hello,

    If the above does not work, please try the following ABS Coding:

    2EAA6B7DD4990BB089920B6781976974D62BD091D081963602415054828812

    If the coding is accepted, you will need to perform the...
  18. Replies
    5
    Views
    211

    Hello, I would strongly recommend to fix these...

    Hello,

    I would strongly recommend to fix these vehicles correctly and not try to modify or code out anything that has to do with safety or performance, the Lamborghini Aventador is a precision...
  19. Hello, Do not change the coding for the...

    Hello,

    Do not change the coding for the [14-Susp. Elect.], it is correct at [000012] since this is a 2008 Audi TT (8J) Coupe with a 3.2l VR6.

    To clear the code 01794-Control Module - Incorrect...
  20. Hello, Actually based on my calculations,...

    Hello,



    Actually based on my calculations, your vehicle was driven 62,973 miles and 922 days have passed since the "TDI diesel emissions modification".

    You can view this information here:...
  21. Hello, I would like to add my two...

    Hello,

    I would like to add my two cents(experience) about the Volkswagen/Audi vehicle history data that is out there.

    As an ex-dealer technician for both Audi and Volkswagen, I know for a fact...
  22. Replies
    2
    Views
    110

    Hello, The fault code below, if it does not...

    Hello,

    The fault code below, if it does not clear, would be a good indication there is an internal fault with the J234-Airbag Control Module.

    Based on some more research, this is further...
  23. Thread: ABS probelm

    by DrPeter
    Replies
    2
    Views
    131

    Hello, In the [03-ABS brakes] controller...

    Hello,


    In the [03-ABS brakes] controller there is a Basic Settings [Basic setting of ESP sensor unit] that may help with the two codes for the "Longitudinal Acceleration Sensor" and "Lateral...
  24. Replies
    2
    Views
    202

    Hello, There are a lot of fault codes with...

    Hello,

    There are a lot of fault codes with freeze frame data that indicates the battery voltage is/was below 12V.
    We recommend to use a battery maintainer when clearing codes. I suggest to clear...
  25. Replies
    1
    Views
    129

    Hello, I would suggest to have a look at...

    Hello,



    I would suggest to have a look at the Measuring Value Block (MVB) group [005] in the [42-Door Elect, Driver] controller (J386), to evaluate the switch positions.

    Field (1) = F220...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4