iichel

Morning all, i got stuck last night on a 2014 vw up with the P175F - Basic Settings not performed, N flashing and non start. It was my...

that's not true, i recently retrofitted a camera to an up without DAB.

good luck then on the odis forum it's a nice retrofit though, i did it as well

Engine seems to have errors but not showing up?

If you did an Auto-Scan before the cluster swap, then that will have the correct ABS coding - you'll find it in C:\Ross-Tech\VCDS\Scans

this is a calculator i made myself in google sheets, i'll send you a PM

I'd recommend to try my coding with correct bytes for CAX engine and manual gearbox @nugentp

90% sure is still a guess

it's a finite list from 00 00 .... 00 00 to FF FF .... FF FF. I'm sure we'll find the right one. :P

310448E0236E00B88C2912E9C4D400411300 would be my guess

There was no Highline camera for the small triplets

So.... I pulled the wheel off, confirmed that the spring was set one entire rotation off. Centered it up, did the adaptations via VCDS...

Did you by any chance do one of the 'reset' basic settings?

What happened ? Any idea what the dataset has changed?

Vcds cannot write datasets