Boki Ar

Can we try step by step, first: Start the engine drive the car over a short path with a maximum speed of 20 km/h + turn the steering...

I have cleared the engine and transmission code but have run into trouble with the basic setting. Group 068 i get error group 068 not...

@Flattyre147 check your Scans and Logs folder, maybe there is the coding you are looking for.

Do a full Auto Scan. You will see [03 - ABS] SFD.

Yes, but it needs an SFD token.

For beginning test difference pressure sensor: Advanced Measured Values select item in menu: IDE07744 - Diesel Particulate Filter...

As soon as I simultaneously press both pedals when prompted to:

Do you have something like Part No SW: 05L 906 027 E

Thank you. I think this was the option available to me: IDE10240 - Zero detection of SRC additive level It did not cure my problem...

@Jef says: Please check if it fits your model: IDE04732 - Test: Reducing agent SCR - Efficiency

So far I have met with these procedures: Key on, engine off. [Select] [01-Engine] [Basic Settings - 04] IDE04567 Resetting of SCR tank...

Hi, sorry, I'm not meaning to sound lazy, but I have a full scan from last night right here from my Needle Tweak request last night.. is...

OK, here it is: Sunday,21,April,2024,23:59:32:13174 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64 VCDS Version...

We need Auto Scan to know which car we are talking about.

Follow the instructions in the video. We start by pressing the brake, drive without sudden movements, let the speed be a little over 20...