Uwe

11.6v isn't exactly a "charged" battery by today's standards....

Yes. The one in your scan is index /02B, but I have no idea whether that's the correct index for this car, and since you said: ...

Looks to me like your ABS didn't wake up right away. Clear all those faults and let's see what comes back. -Uwe-

Hi and welcome. Please post an Auto-Scan for context, so people can see how the vehicle is equipped and the details of any faults...

What car is it in? Hit it with VCDS in generic OBD-II mode. Look at the upper-left of the screen. What protocol is it using? If...

Run-in pressure is higher, to handle the added friction as per SSP.

You might want to try cleaning the connections between immobilizer pickup coil (at ignition barrel) and instrument cluster. Well, if...

I'm pretty sure we just had somebody else trying to do this on a very similar car and did not find a solution. Yep, here it is...

Thursday,18,April,2024,17:23:51:11114 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64 VCDS Version: 23.11.0.0 (x64)...

If the battery was still completely flat after driving for four hours, either that battery is completely shot and should be handed over...

Check power, ground, and data line connections at modules. -Uwe-

Update: I decide to pull the injectors and the pump and send them out for bench testing. Testing revealed that injectors were what you...

I encountered a problem for the first time and couldn't find an answer in the user manual. When K1 or K2 is faulty (short to +12V or...

Any water leakage into the cabin of this car? -Uwe-

Then I think you need to ask on the OBD11 support forums how to do it with OBD11.