Uwe

The scan you just posted appears to be from a 2018 Golf R....? In that car, somebody has been fooling with the Gateway's Installation...

No need to wait for it to be operational, as I posted VCDS will have saved your last scan on your PC.

Sounds like it needs a skid plate down there. -Uwe-

I doubt that has anything to do with the situation. -Uwe-

If G201 is not working, it is going to succeed. Also for error 004, I have this explanation: "The basic setting in the current ignition...

I am skeptical. Walker makes aftermarket mechanical exhaust parts that generally OK, but I really doubt they make sensors. My guess...

There's something rather strange and unusual going on here, but I'm really don't know what it could be. -Uwe-

Address 01: Engine, soft coding change Byte 5, Bit 4 enable Byte 6, Bit 4 enable 012A00122464012FB4000000000000000000000000000000...

that did it, thank you.

I don't think so. I believe you need to do that mechanically. -Uwe-

Pay attention to the post #35, good luck. 70$ sounds reasonable and acceptable.

Please post an Auto-Scan - we have no idea what car you have or how it is equipped which is important as not all DQ381 are the same.

Only with a remap

Before you do that... Go to 46-Cent. Conv. and look at MVB 003. The first two fields should show the state of the rear roller blind...

Please post the full text file of the Auto-Scan so we can see the details behind the mailfunctions. VCDS saves that in the...