NEtech

It is not in Basic Setting. Look here https://forums.ross-tech.com/index.php?threads/1820/post-16539

If G201 is not working, it is going to succeed. Also for error 004, I have this explanation: "The basic setting in the current ignition...

And you probably mean: 01044 - Control Module Incorrectly Coded 000 - - - Intermittent Yes, just change coding as showed above and as...

Before you do valve calibration, have you made all other basic settings with success? Please post a new Autoscan.

Only Ignition ON, Engine NOT running? Maybe because of DTC 00234 Try coding with current: 0051168

Max difference is 20% cyl.1 cyl.2 cyl.3 cyl.14 [Applications] [Controller Channel Map] - Controller Address = 01 - Login or security...

yes use random.

With Trailer. Do standard procedures. First: [Options] [User Interface and Identification] write numbers for wsc, importer, device no...

MWB 140 to 146 is about cylinder pressure. 141 is avg/max pressure. Please post controller map.

New Version on the Download Page now: https://www.ross-tech.com/vcds/download/current.php -Uwe-

Click on the X, then use it, and wait a few days, there will probably be a new version.

Yes it is showed, look at Byte 6 Bit 3 [13] 0051168 > 0051161

For the record these are correct: IDE01153-SIA: maximum value of distance to service 15000 IDE01154-SIA: maximum value of time to...

How do you know your [47] has ANC ? Please post Controller Channel Maps from the engine. [Applications] [Controller Channel Map] -...

From other models, I would try this: 113B600D492B00FC881306ED921D00413000