Hi guys I am getting the below errors
Is the module faulty? If it is where is it located?
If I replace it will I have to do some coding or just swap it over?
I have tried to clear the codes but they come back after a few days
Any help?
Car is an S5 4.2L model 2008
Thanks
Is the module faulty? If it is where is it located?
If I replace it will I have to do some coding or just swap it over?
I have tried to clear the codes but they come back after a few days
Any help?
Car is an S5 4.2L model 2008
Thanks
Code:
Wednesday,09,November,2016,06:24:01:14675
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 16.8.3.1
Data version: 20161010 DS267.0
www.Ross-Tech.com
VIN: WAUZZZ8T08A036984 License Plate:
Mileage: 102800km-63876mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 8T0-907-468.clb
Control Module Part Number: 8T0 907 468 F HW: 8T0 907 468 F
Component and/or Version: GW-BEM 4CAN-M H07 0084
Software Coding: 000003
Work Shop Code: WSC 22080 822 86671
VCID: 448778A0C7A28C62D8-8010
2 Faults Found:
03041 - Energy Management Active
000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 7
Fault Frequency: 1
Reset counter: 230
Mileage: 102681 km
Time Indication: 0
Date: 2016.11.02
Time: 19:01:00
01312 - Powertrain Data Bus
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 244
Mileage: 102801 km
Time Indication: 0
Date: 2016.11.09
Time: 06:17:10
Last edited: