T5 cruise control coding

[corrado_joe]

Hi there

With my Hex+ CAN device I am trying to code my 2005 Transporter for CCS.

I have the following modules:

Engine 070 906 016 BD
Cent Elec 7H0 937 049 K

I hve tried to code both.

Re Cent Elec, there seems to be no mention of CCS coding in the Long Helper, even though in your help page it’s shown as supporting CCS.

When I try to code the engine module I get Error 22 – conditions not correct or request sequence error.

Could you help please?

Sunday,04,September,2016,17:56:53:46283
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 15.7.4.1 (x64)
Data version: 20160216
www.Ross-Tech.com


VIN: WV1ZZZ7HZ5H071948 License Plate: VU05VLN
Mileage: 191890km-119234mi Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 7H (7H - VW Transporter/Multivan (2003 > 2010))
Scan: 01 02 03 08 09 0B 0D 15 16 17 18 19 1C 22 2D 37 45 46 47 56
57 6E 76 77 78 7D

VIN: WV1ZZZ7HZ5H071948 Mileage: 191890km-119234miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Part No SW: 070 906 016 BD HW: 028 101 183 5
Component: R5 2,5L EDC 0000SG 7001
Revision: 12345678 Serial number: VWZ7Z0E1324425
Coding: 0000032
Shop #: WSC 02756 785 00200
VCID: 53AEC0A5F14183A693-5120

No fault code found.
Readiness: 0 0 X X X

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 7H0-907-37x-ASR-F.lbl
Part No: 7H0 907 379 G
Component: ASR FRONT MK25 0103
Coding: 0007205
Shop #: WSC 02756 785 00200
VCID: 3972920D73ED59F679-5102

1 Fault Found:
00290 - ABS Wheel Speed Sensor; Rear Left (G46)
012 - Electrical Fault in Circuit

-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 7H0-937-049.lbl
Part No: 7H0 937 049 K
Component: BORDNETZ SGVER 1.0 1901
Coding: 0000101
Shop #: WSC 02756 785 00200
VCID: 3A708D0176EB52EE70-50E6

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 605 A
Component: 3B AIRBAG VW51 0008
Coding: 13122
Shop #: WSC 02756
VCID: 22405561AE7B3A2E48-5102

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 7Hx-920-xxx-17.lbl
Part No: 7H0 920 950 G
Component: KOMBI+WEGFAHRSP VDO V03
Coding: 01412
Shop #: WSC 00226
VCID: 2F66AC55EDA98746D7-5102
WV1ZZZ7HZ5H071948 VWZ7Z0E1324425

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 02756
VCID: 70E46F293017D8BE8E-50E6

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 7H0-959-433.lbl
Part No: 7H0 959 433 B
Component: C2B Komfortgerát 0004
Coding: 00068
Shop #: WSC 00581
VCID: 3260A521FE9BAAAEB8-4B00

Subsystem 1 - Part No: 7H2959802A
Component: Tõrsteuer.FS KLO 0203

Subsystem 2 - Part No: 7H2959801A
Component: Tõrsteuer.BF KLO 0203

1 Fault Found:
00942 - Exterior Mirror Retract Motor; Passenger Side (V122)
35-00 - -

End-------------------------(Elapsed Time: 06:24)--------------------------

 

[golfi_vend]

Are you appling login 11463 in Login menu? Or what coding are you thinking? Coding ≠ Login.

 

[Boki Ar]

Take a look here, please.

In the meantime, there will be someone from the Ross-team, i know.

 

[corrado_joe]

Thanks guys - yes I am clicking on Coding II - 11 I think it was, and then 11463 and Do It!

I'm sure I followed those instructions Boki Ar but it didn't work.

 

[PetrolDave]

Did you have the cruise control switch in the Off position?

When I added cruise control to an Audi B6 A4 a few years ago the coding appeared to take by the cruise didn't work, after turning the cruise switch off and repeating the coding all was OK.

 

[corrado_joe]

Yes it was off. Any thoughts Uwe or Sebastian?

 

[MartinsX]

Check MVB in 09, does all CCS switch positions work?

 

[corrado_joe]

Hi guys - tried it again tonight and worked fine. Thanks for your help.