Audi A4 2004 transmmision PRND blink

[Jack@European_Parts]

Jason makes a great diplomat..........

 

[crisseibert]

cristiano seibert

Edit: Address removed -- such things are best sent via PM or e-mail

 

[crisseibert]

Old car... With unusual TCM. New interface (HEX-NET)..

I would like to send you an old cable to try. Please confirm your address is the same as it was in 2014.

-Uwe-

cristiano seibert

Edit: Address Removed

 

[crisseibert]

Please any body ever use vcds cable that work on Audi A4 2004 with CVT transmision???

Becouse i have the ..Hex net ...but not work

Please any body tell me one vcds work for this car so i can get!!!!! I need to get this car done!!! Thanks

 

[Uwe]

VCDS works fine. What's not 100% clear is whether the HEX-NET works with that TCU. Since we now have an address, there's a KII-USB on its way to you to check whether the problem might be the HEX-NET. We also have a K-Line 01J TCU coming so we can test in-house.

-Uwe-

 

[crisseibert]

ok thanks for help me…appreciate...

 

[crisseibert]

VCDS works fine. What's not 100% clear is whether the HEX-NET works with that TCU. Since we now have an address, there's a KII-USB on its way to you to check whether the problem might be the HEX-NET. We also have a K-Line 01J TCU coming so we can test in-house.

-Uwe-

ok thanks for send me the.. KII-USB Interface ..the interface work right way………

Tuesday,14,June,2016,18:31:12:59763
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 15.7.4.1 (x64)
Data version: 20160216
www.Ross-Tech.com





--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


                Address 02: Auto Trans       Labels: 01J-927-156.lbl
Control Module Part Number: 8E0 910 155 F    HW: 01J 927 156 HH
  Component and/or Version: V30 01J 1.8l5VT USA 3220
           Software Coding: 0001001
            Work Shop Code: WSC 05142 444 83694
                      VCID: 2851EAB6981A687E16-515A
2 Faults Found:

17090 - Transmission Range Sensor (F125) 
            P0706 - 000 - Implausible Signal - MIL ON
             Freeze Frame:
                    RPM: 1536 /min
                    RPM: 0 /min
                    RPM: 0 /min
                    (no units): 2.0
                    Torque: 0.0 Nm
                    Temperature: 54.0°C
                    T.B. Angle: 0.0°
                    Bin. Bits: 0001 0 0

18161 - Tiptronic Switch (F189) 
            P1753 - 000 - Implausible Signal
             Freeze Frame:

now what about my hex net why is not communicate with the transmission???

what address should i send back the interface?
thanks so much for help me…..

 

[Jack@European_Parts]

Trace the switches in WD and replace/repair harness if needed or replace J217

 

[crisseibert]

1...Trace the switches in WD and replace/

2...repair harness if needed or replace J217

Hi thanks for helping me!!!! But I don't understand very well this!!!!
2 item has to be changed or only one?

I know what is j217 but I have no idea what is (WD)...thanks for responding!!!

 

[Uwe]

now what about my hex net why is not communicate with the transmission???

I'm thinking the firmware in the HEX-NET does not properly accommodate this TCU's rather unusual timing requirements. I'm confident we can fix that with an update.

-Uwe-

 

[crisseibert]

I'm thinking the firmware in the HEX-NET does not properly accommodate this TCU's rather unusual timing requirements. I'm confident we can fix that with an update.

thanks……...ok.. just tell me what to do…..im ready...

 

[Uwe]

Hang onto the KII-USB we sent you for now. As I mentioned earlier, we've got a TCU on the way so we can try to reproduce this and then fix it.

-Uwe-

 

[crisseibert]

Hang onto the KII-USB we sent you for now. As I mentioned earlier, we've got a TCU on the way so we can try to reproduce this and then fix it

Ok... Thanks....and what about the codes that I have? Any thoughts?
Thanks..

 

[Uwe]

Been here?

http://wiki.ross-tech.com/wiki/index.php/17090
http://wiki.ross-tech.com/wiki/index.php/18161/P1753

Both have notes regarding your CVT.

-Uwe-

 

[crisseibert]

Been here?

http://wiki.ross-tech.com/wiki/index.php/17090
http://wiki.ross-tech.com/wiki/index.php/18161/P1753

Both have notes regarding your CVT.

Yes already look it... But thanks so much anyway.....

 

[crisseibert]

uwe ..did guys find out what is wrong with HEX NET ? thanks for your time...