- Joined
- May 13, 2014
- Messages
- 51
- Reaction score
- 9
- VCDS Serial number
- C?ID=214777
Hi,
I am wondering if it is possible to disable the test of the lights which as result showing the "burned bulb" led on the dashboard.
I found out that probably it is possible with some access to restricted area of the module 9 but I don't have idea where to start. Where to get the codes or how to even look on this config (attached)
I have this codes from some guy who able to do that but they format are new for me
Please assist some one
TFL diagnostic : FF — ON / F0 OFF
1942 " FF
1943 " FF
1944 " FF
LED in DLR
3110 additional bulbs in TFL 82 — LED TFL
3111 additional bulbs in TFL 6F — LED TFL
Thanks
I am wondering if it is possible to disable the test of the lights which as result showing the "burned bulb" led on the dashboard.
I found out that probably it is possible with some access to restricted area of the module 9 but I don't have idea where to start. Where to get the codes or how to even look on this config (attached)
I have this codes from some guy who able to do that but they format are new for me
Please assist some one
TFL diagnostic : FF — ON / F0 OFF
1942 " FF
1943 " FF
1944 " FF
LED in DLR
3110 additional bulbs in TFL 82 — LED TFL
3111 additional bulbs in TFL 6F — LED TFL
Thanks