I want to build the fastest CC in America.

   #21  

RGH0

Verified VCDS User
Verified
Joined
Mar 14, 2021
Messages
1,048
Reaction score
815
Location
Australia
VCDS Serial number
C?ID=433612
yup... and that was 5+ decades ago with the tech that was available back then....
and it was also based on used production BMW 2002 blocks from the 1960s
 
   #22  

SaVAGeSoot

Verified VCDS User
Verified
Joined
Nov 9, 2022
Messages
4,358
Reaction score
2,389
Location
ON, Canada
VCDS Serial number
C?ID=568688
and it was also based on used production BMW 2002 blocks from the 1960s
Yeah, didn't they\he have the habit of using "seasoned" blocks from vehicles that had already done 100k or something to "normalize" the casting stresses or something?
Mind blowing stuff
 
   #23  

SaVAGeSoot

Verified VCDS User
Verified
Joined
Nov 9, 2022
Messages
4,358
Reaction score
2,389
Location
ON, Canada
VCDS Serial number
C?ID=568688
YES you are abusive, insulting and often display an anti-social demanor in this forum.
Newsflash, we are on a technical diagnostic forum.... not a life coaching one! :rolleyes:
 
   #26  

Crasher

Professional User
Professional VCDS User
Joined
Jun 12, 2015
Messages
4,602
Reaction score
3,946
Location
Nottingham, England
VCDS Serial number
C?ID=21420
A VR6 engine would certainly be an easier means to achieve the desired HP to get the job done. The 10.6* 3.6L VR6 however has a number of documented harmonic issues in stock form causing oil pump drive and crank damper failures. For a moderate power level the 3.6L is OK but for high HP I prefer the 15* 3.2L engine which is very solid and reliable.

You can get there with any of these engines it's just a matter of how much time and money you want to spend and how important reliability is to you.
I know a chap who can balance anything, though probably not certain posters replies.
 
Back
Top