Lamborghini gallardo engine control module 2 (011)

[taco.daddy84]

Hello, looking to see if anyone knows the access code to ecu module 2 (011) for a 2011 Lamborghini gallardo. Replaced the lower intake manifold and need to perform the adaptation but won’t give me access which I’m assuming due to that security access. Anyone run into this or a way around this? Thank you

 

[Ziddywerks]

I don't see why you would need a SA for perform basic setting on flaps. Im pretty sure you have to do it from the master ecm 01. Both banks are done at the same time.

 

[Sebastian]

@taco.daddy84 I've replied to this request earlier via email since it came in through our support emails. Please answer the questions raised there, similar to @Ziddywerks I believe this is a user error BUT the ECM Master is often enough not the way to go here and you have actually been using Adaptation instead of Basic Settings (based on your screenshots). That said, once we have the requested details we should be able to provide you with step by step instructions.

 

[taco.daddy84]

It’s the adaptation that needs to go through not the basic settings , according to the test plan. Based off a r8 repair manual it’s requesting a adaptation

 

[Sebastian]

Please see my email from earlier this morning and reply to it with the needed vehicle details (Auto-Scan etc.) and then we'll verify what you have there specifically. The R8 instructions may work for the base engine but diagnostic data is not the same between the R8 and the Gallardo.

 

[taco.daddy84]

Okay just logged in, I see your email. Thank you and will get back to you. May actually have found other issues separate for this so once I repair those I’ll reply

 

[taco.daddy84]

@taco.daddy84 I've replied to this request earlier via email since it came in through our support emails. Please answer the questions raised there, similar to @Ziddywerks I believe this is a user error BUT the ECM Master is often enough not the way to go here and you have actually been using Adaptation instead of Basic Settings (based on your screenshots). That said, once we have the requested details we should be able to provide you with step by step instructions.

Would I be able to send you all that, even though I currently have things taken apart and may show faults?

 

[Sebastian]

Yes, assuming the ECM's etc. are still wired up - all we need is the basic Auto-Scan for the time being. That way we know exactly what hardware (and control module software) you are working on.

 

[Ziddywerks]

What type of interface are you using? According to the VCDS wiki lambo is not officially supported but also mentions that only hexnet work in terms of hardware.

Lamborghini Gallardo (40) - Ross-Tech Wiki

 

[Sebastian]

This isn't an issue here, we're already on it. Will update this thread as we go.

 

[Sebastian]

The issue here is as expected, the function in question is not in adaptation.

VCDS > Select > 11 - Engine 2 > Basic Settings - 04 > MVB 144

 

[Ziddywerks]

This isn't an issue here, we're already on it. Will update this thread as we go.

Please make sure to change the wiki then.

 

[Dr Sheldon]

VCDS wiki lambo is not officially supported

That is no way the same as "not supported" or "wont work"

So does the wiki need to change ?

Don't look like it from here !

 

[Ziddywerks]

That is no way the same as "not supported" or "wont work"

So does the wiki need to change ?

Don't look like it from here !

Of course its does.

Why does it say hexnet only if thats not the case?

Interface Hardware

HEX-NET Only

​

 

[Sebastian]

It is HEX-NET only and the user here is using a HEX-NET. There is an active behind the scenes process, which means we are completely overhauling the WIKI and it's content. This does include more specific /detailed compatibility information for models like the Gallardo and others that aren't exactly common. If you need to work on the Gallardo, you'll also need a hardware side adapter depending on which system you plan to work on.

Fun fact, we do have limited Bugatti support in VCDS but we're not advertising it due to a total lack of relevancy in the real world.

As for supported and unsupported, we consider a model fully supported if and when we're also able to provide technical support in addition to bare diagnostic access. This is part of why the Gallardo page has the statement as it does right now.

 

[Dr Sheldon]

Now you are changing the story to suit yourself !!

You wrote

According to the VCDS wiki lambo is not officially supported

Lamborghini Gallardo (40) - Ross-Tech Wiki

Now you throwing toys out of mummy's pram with screenshots that no one cares about !!

@Sebastian has this in hand - What you doing here ?

 

[Ziddywerks]

It is HEX-NET only and the user here is using a HEX-NET. There is an active behind the scenes process, which means we are completely overhauling the WIKI and it's content. This does include more specific /detailed compatibility information for models like the Gallardo and others that aren't exactly common. If you need to work on the Gallardo, you'll also need a hardware side adapter depending on which system you plan to work on.

Fun fact, we do have limited Bugatti support in VCDS but we're not advertising it due to a total lack of relevancy in the real world.

As for supported and unsupported, we consider a model fully supported if and when we're also able to provide technical support in addition to bare diagnostic access. This is part of why the Gallardo page has the statement as it does right now.

Next time there should be auto scan posted. I'm not a mind reader.

 

[Ziddywerks]

Now you are changing the story to suit yourself !!

You wrote


Now you throwing toys out of mummy's pram with screenshots that no one cares about !!

@Sebastian has this in hand - What you doing here ?

I forgot you still got a really big head but yet you always choose to talk out of your ass.

 

[Dr Sheldon]

I forgot you still got a really big head but yet you always choose to talk out of your ass.

Come on

You are main dealer offspring

Now you have an eeprom reader you are king - Bit of Hexidecimal & XOR and you think you have something worth having - Grow up !

 

[TTT]

As per forum rules, we should of seen an auto-scan. Not that I would of known what to do with it.