- Joined
- Jun 12, 2015
- Messages
- 3,640
- Reaction score
- 3,127
- Location
- Nottingham, England
- VCDS Serial number
- C?ID=21420
Plate the crank and see if the cam pin will go in.
Intermittent P0016 on CAGB 2.0 TDI (Manual) – Flashing Glow Plug Light Under Load
- Thread starter ScottB96
- Start date
- Joined
- Jan 21, 2026
- Messages
- 13
- Reaction score
- 2
- Location
- UK - Northern Ireland
- VCDS Serial number
- C?ID=633432
Think this fixed it. Replaced Cam Shaft Position Sensor and also verified timing. However, this time i counterheld the cam sprocket before tightening. Drove around 20 minutes and looking good so far ! Thanks for the help everyone.