Can't coding ABS MK100 from Skoda Octavia

[ATX2015]

Hello,

I have to replace au faulty ABS MK100 from a Skoda Octavia. I read long coding from original ABS and tried to code it on another ABS with the exact part number but I get an error.
Could you please help me?
What do you need?
I'm on bench with the gateway to communicate with ABS.
Best regards

 

[m3nt4l]

If you can provide a full auto scan it would help

 

[Uwe]

I'm on bench with the gateway to communicate with ABS.

So you're trying to code the ABS on a bench, with only a Gateway? I don't think that can possibly work. The ABS needs to read the VIN from the cluster to confirm that the coding matches the car, so unless you also wire that car's cluster to your bench, I don't anticipate success with this method.

-Uwe-

 

[ATX2015]

thanks for your answers.
Yes I have only a Gateway and the ABS.
I have another question, the HCU of the ABS is coded too? as mk100 mounted on Ford. Original HCU is faulty so if I swap a second hand part on original ABS ECU, need to code it?

 

[Uwe]

I have another question, the HCU of the ABS is coded too? as mk100 mounted on Ford. Original HCU is faulty so if I swap a second hand part on original ABS ECU, need to code it?

I don't think so, but I'm not 100% certain.

-Uwe-

 

[ATX2015]

ok, thanks for your help.

 

[ATX2015]

ok, thanks for your help.