Do I need an hex v2 cable to read the cupra born my current cable he hex usb+can unlimited will connect but just get no response from controller using latest vcds 25.3.2
Thanks for response in advance
Thanks for response in advance
Hex usb+can connect to cupra born
- Thread starter lee3272
- Start date
What control module were you trying to access?
Although I agree that a HEX+CAN doesn't support that car well at all, I'm a bit surprised at "No Response from Controller".
-Uwe-
When I did a full scan hardly any
Want to do adaptations on lane assist to last setting
Control unit A5 also had bonnet open
Want to do adaptations on lane assist to last setting
Control unit A5 also had bonnet open
What model year is this car?
Since you're in the UK: Model year is not the "Reg Plate". If in doubt, please post the first 10 digits of the VIN and/or the production date.
-Uwe-
Since you're in the UK: Model year is not the "Reg Plate". If in doubt, please post the first 10 digits of the VIN and/or the production date.
-Uwe-
VSSZZZK14S
'S' = 2025. I do not think you'll be able to tweak anything in that one; it's likely to be locked down with SFD2.
-Uwe-
-Uwe-