- Joined
- Feb 19, 2014
- Messages
- 643
- Reaction score
- 528
- Location
- UK (ilexa)
- VCDS Serial number
- C?ID=56983
I've tried this on my Android phone (Galaxy S3 Android 4.3), and two Windows 7 laptops in Firefox and IE
While connected to the HEX-NET in AP mode, I click network profile 2 and add my IP, subnet mask and gateway addresses. After submitting them I tried to connect the HEX-NET but could not. It wasn't showing up in my network list either and when I looked at profile 2 again, all the numbers were reversed.
192.168.1.10 became 10.1.168.192
255.255.255.0 became 0.255.255.255
192.168.1.254 became 254.1.168.192
I left them reversed and clicked submit again, and the HEX-NET appeared on my network and worked fine. When I looked at the numbers, they were correct. Each time I clicked the submit button and looked back at the numbers, they had toggled between correct and reversed
Best regards
Derek
While connected to the HEX-NET in AP mode, I click network profile 2 and add my IP, subnet mask and gateway addresses. After submitting them I tried to connect the HEX-NET but could not. It wasn't showing up in my network list either and when I looked at profile 2 again, all the numbers were reversed.
192.168.1.10 became 10.1.168.192
255.255.255.0 became 0.255.255.255
192.168.1.254 became 254.1.168.192
I left them reversed and clicked submit again, and the HEX-NET appeared on my network and worked fine. When I looked at the numbers, they were correct. Each time I clicked the submit button and looked back at the numbers, they had toggled between correct and reversed
Best regards
Derek
