RLHS downgrade

[Renderlift]

The question is: can i downgrade rlhs round sensor (5q0955547) to rls square sensor (1k0955559ah)? My vehicle is a 2014 VW CC 4motion and currently retrofitting the lane assist, but in Brazil there is only the windshield with a square sensor, and that's still very rare, but I get one!!
Thanks!

 

[iichel]

if the car is 5Q0 chassis then no. if it's 5K0/7N0/1K0 then yes.

 

[siLc]

While CC isn't MQB, it has the 5Q0 RLHS since very early - from MY2013. But it still has a 3AA BCM, so you can use the older 1K0 RLS.

If you can get the proper 2015+ CC windscreen, you can directly mount the 3Q0 front camera and not have to use adapters, and keep the 5Q0 RLHS.

 

[Renderlift]

if the car is 5Q0 chassis then no. if it's 5K0/7N0/1K0 then yes.

Yes, they have a 3aa bcm and 7n0 gateway! Thank friend!!

 

[Renderlift]

While CC isn't MQB, it has the 5Q0 RLHS since very early - from MY2013. But it still has a 3AA BCM, so you can use the older 1K0 RLS.

If you can get the proper 2015+ CC windscreen, you can directly mount the 3Q0 front camera and not have to use adapters, and keep the 5Q0 RLHS.

A 2015+ cc windshield will be perfect, but here in brazil doesn’t exist!
I have the square sensor to test, and although this adaptation is possible, the sensor does not appear in the sub-systems, and in the measuring values, when clear the dtcs, the sensor sends data, and then no longer communicates, generating error 01520! I believe I'm doing something wrong, but I don't know what it is!
Many thank for support guys!