Hey there, got some weird problem with my 2018 SQ5. The front bumper had a paint job and after putting it back there is an issue with ACC and therefore Audi pre-sense. I am new to VCDS, but got one from a friend of mine and this is the auto scan:
When I go to module 13 and enter with security code, within adaptation, it showing Error:Channel not available on horizontal and vertical angles misalignment. It has misalignment on both left and rear radar, but even if I rotate the horizontal and vertical screws, the degrees don't change. Looking at the radars, they seem to point exactly as the were prior painting the front bumper. Any ideas how could I fix this? Posting some screenshots from VCDS as well:
Code:
Removed. Data from a clone/pirate copy of VCDS is not acceptable in Ross-Tech's forum.When I go to module 13 and enter with security code, within adaptation, it showing Error:Channel not available on horizontal and vertical angles misalignment. It has misalignment on both left and rear radar, but even if I rotate the horizontal and vertical screws, the degrees don't change. Looking at the radars, they seem to point exactly as the were prior painting the front bumper. Any ideas how could I fix this? Posting some screenshots from VCDS as well:
Last edited by a moderator:
