Which valve body for my 06 Audi TT MK1 1.8l 6spd

[Mike T]

I've heard there are 3 versions of the 09G valve body. My trans has a VCDS Part # 09G-927-750 AQ How do I find the correct one?

 

[DrPeter]

Hi there,

You have a few options:

• Call the dealer—perhaps they can assist you.
• Create an account at www.PartsLink24.com for a day of access and look up the part number(s) yourself.
• Post an Auto-Scan of your vehicle, including the VIN, and see if someone here can help.

If you choose the latter, be sure to tag me @DrPeter in your new post. I will see it and do my best to assist, unless someone else beats me to it.

Hope this helps,
drpeter

 

[Mike T]

Hi there,

You have a few options:

• Call the dealer—perhaps they can assist you.
• Create an account at www.PartsLink24.com for a day of access and look up the part number(s) yourself.
• Post an Auto-Scan of your vehicle, including the VIN, and see if someone here can help.

If you choose the latter, be sure to tag me @DrPeter in your new post. I will see it and do my best to assist, unless someone else beats me to it.

Hope this helps,
drpeter

Update. All sensors and solenoids pass Audi ohms test from/at the TCM connector. I replaced the TCM and here what I have now:
Code:
-------------------------------------------------------------------------------
Address 02: Auto Trans Labels: 09G-927-750.clb
Part No: 09G 927 750 AQ
Component: AQ 250 6F 0544
Coding: 0008201
Shop #: WSC 01236 785 00200
VCID: 005E58D3561DC3FA5FB-5160

2 Faults Found:
01045 - Tiptronic Switch (F189)
008 - Implausible Signal - Intermittent
16997 - Transmission Control Module
P0613 - 004 - Processor Malfunction - Intermittent

-------------------------------------------------------------------------------

I tried to clear the codes on the new TCM and reload the coding, but got an error 22, coding refused.
Any help?

 

[DrPeter]

Hello,

Did you happen to mouse over and click on the fault code number?

Try it here: 01045 <<< Click this <<<


drpeter

 

[Mike T]

That 01045 never existed before the TCM replacement installed. My main concern is the 16997 P0613 and it refusing the coding. If there's something wrong with the new unit, I have to send it back.

 

[DrPeter]

Hello again,

I think it is time to post a before TCM replacement and after TCM replacement Auto-Scan so that we can see what is really going on.

Sticky - How to post an Auto-Scan

Using the classic, Windows-based VCDS: Also, please wrap your Auto-Scan data in CODE tags, like this: Chassis Type: 4G0 Scan: 01 02 03 05 08 09 0E 10 13 15 16 17 19 28 36 3B 3C 42 44 46 47 52 53 55 56 5F 62 72 82 84 85 8B 8E 8F 90 VIN: WAUBGAFC5CN015352 01-Engine -- Status: OK...

forums.ross-tech.com

Thank you,

drpeter