Hi there,
I've been doing a couple of retrofit add-ons to my sons 2013 Skoda Fabia Monte Carlo, including adding cruise control and a Multi Function Steering Wheel.
He's only had the car 8 weeks now, but it was bought from his uncle, was well kept and only had a couple of random issues with the radio & multimedia player with it when I first scanned the car as below
Prior to commencing the cruise and MFSW installs, we have changed all front light bulbs for LED replacement variety (H7, H4 & W5W), and the rear number plate lamps for LED C5W festoon lamps - none of these have caused any issues.
We have upgraded the base head unit for aftermarket one as here
https://www.amazon.co.uk/dp/B083TBTSWC?ref=ppx_yo2ov_dt_b_fed_asin_title
but again, nothing has been evident with the system since installing this.
During the course of last weekend, I have added the cruise control system with changing the column stalks and adding a new short loom from the column stalks, via the BCM T73B plug, fusebox and finally the T94 plug of the engine ECU, all as per the details below.
With hindsight, it would have been sensible for me to have tried to take another scan of the car before committing to the retrofits, but my mind was more focused on the physical challenge ahead of getting all of the cabling installed, and based on the understanding that the new looms come pre-fitted with connector ends, short of getting them in the wrong hole position, I felt the connections shouldn't pose any issue once the plugs were all installed again as the plugs have a very positive connection with their respective female sockets.
I have added a flat bottomed MFSW following the link that's posted in the first page of the cruise control info as below
https://uk-polos.net/viewtopic.php?t=54171
Whilst the instructions were easy enough to follow there is one difference in the set up from the original posters car to my sons Fabia, that being the colour of the wire located in pin 17 of the BCM white plug.
In the original posters car it was violet/white, whilst in my sons car it was grey/white, all the other cables in the plug appeared to be the same colours in both cars so i just put this down to a quirk difference between the VW and Skoda brands.
Having installed all of the cabling and got the car back together I came to code the new parts but couldn't get VCDS to connect with any module in the car.
I have tested the port etc and provide photos below of VCDS dialogue boxes returned
I've only posted the failed response from the engine and central electrics controllers, but I got a fail response from all controllers both under auto scan and individual controller requests.
Just to confuse things even more, I can access the controllers when I use Carista and OBDEleven.
I have been able to add the coding for the cruise and MFSW, but the car now throws fault codes for the steering angle sensor, and cruise set condition??
Below codes pulled using Carista 28/10/24 at 21.04hrs
Since taking the above, log I have turned off the coding applications for the MFSW and cruise using OBD Eleven, and the cruise fault no longer appears, but the steering angle fault is persistent.
I have followed other forum advice to cure the steering angle fault, dropping the cables off the battery waiting 5mins, turning the wheel from lock to lock before reapplying power, still nothing.
I have also followed other methods with engine running and turning fully left and hold for 10 seconds, then fully right and hold for 10 seconds but this has proved fruitless too.
Whilst scrolling through one of the other threads about the steering angle issue, I came across a suggestion that the steering angle fault could be caused by having the squib ring drop out of sync with it's original programmed position in relation to the centre / straight ahead steering position - this might be relevant in my case, as when moving the squib ring from the original set of columns stalks to the new ones for cruise, the position of the ring moved, and in all honesty I wasn't sure whether it had moved clockwise or anticlockwise, so I adjusted the squib to the approximate centre position.
One thing that was very apparent was that the squib has 7.5 turns end to end, whereas the steering only has 4 turns lock to lock, so it's quite possible that the approx. centre of the squib is 1 rotation out of phase, one way or another.
I appreciate there's a lot of possibilities in the mix, but I'm interested in any pointers as to where to start, short of removing everything and starting again, but I'm not sure that would cure the VCDS non reading issue??
I've been doing a couple of retrofit add-ons to my sons 2013 Skoda Fabia Monte Carlo, including adding cruise control and a Multi Function Steering Wheel.
He's only had the car 8 weeks now, but it was bought from his uncle, was well kept and only had a couple of random issues with the radio & multimedia player with it when I first scanned the car as below
Code:
Friday,27,September,2024,19:43:48:65142
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 24.7.0.0 (x64) HEX-V2 CB: 0.4643.4
Data version: 20240715 DS356.3
www.Ross-Tech.com
VIN: TMBFM25J0E3008424 License Plate: DL13TMU
Mileage: 83390km-51816mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 5J-SK25 (6N0)
Scan: 01 03 08 09 15 17 19 25 2E 44 56
VIN: TMBFM25J0E3008424 Mileage: 83390km-51816miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZA) Labels:. 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 HH HW: 03F 907 309 AK
Component: SIMOS10.22AH10 4040
Revision: --H10--- Serial number: CVN: 98BA8AEF
Coding: 00110056200400080000
Shop #: WSC 13765 031 00000
ASAM Dataset: EV_ECM12TFS02103F906070HH 004006
ROD: EV_ECM12TFS021_SK25.rod
VCID: 6FBBC14F2712EB12B69-803A
VINID: 91D49674215A0150C00081021063FF0F36
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP90.clb
Part No SW: 6R0 907 379 AT HW: 6R0 907 379 AS
Component: ESP9.0i front H02 0001
Serial number: --------------
Coding: 43DC247D212300C8C218246B845500800804
Shop #: WSC 13765 031 00000
ASAM Dataset: EV_Brake1ESP90iBOSCH 003020
ROD: EV_Brake1ESP90iBOSCH_003_VW21.rod
VCID: 1079A2B35AEC94EACF3-8044
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels: 6R0-820-045-9AB.clb
Part No SW: 5J0 820 045 D HW: 5J0 820 045 D
Component: Man AC H02 0202
Revision: 0004SH02
VCID: 2615E46BC8E8EA5A05F-8072
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 6R0-937-08x-09.clb
Part No SW: 6R7 937 087 P HW: 6R7 937 087 P
Component: PQ25 BCM H30 0561
Revision: -1------ Serial number: --------------
Coding: 25980B3808C92400922008002C2B08C00040400F60000000020010000000
Shop #: WSC 13765 790 00046
VCID: 51FF67B791E6DDE280D-8004
Subsystem 1 - Part No SW: 6R0 959 802 AN HW: 6R0 959 802 AN Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 006 5210
Serial number: 13102556130502182409
Coding: 030000
Subsystem 2 - Part No SW: 6R0 959 801 AL HW: 6R0 959 801 AL Labels: 6R0-959-801.CLB
Component: J387__TSG_BT 006 5210
Serial number: 13102561130502175420
Coding: 020000
Subsystem 3 - Part No: 5J0 951 172
Component: DWA-Sensor H03 H03 1211
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HORN H05 H05 1501
Subsystem 5 - Part No: 5J0 951 172
Component: DWA-Sensor H03 H03 1211
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10AirbagT2C H10 0020
Revision: -------- Serial number: 003GX01RBCX7 Dataset Number: t00301685J0 0001
Coding: 003243
Shop #: WSC 13765 790 00046
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250.rod
VCID: 4ACD70DB7C30EE3AC17-801E
Crash sensor for side airbag: driver side:
Serial number: 3495RRB401I50IC4GPGX
Front Passenger's Side Airbag Crash Sensor:
Serial number: 3505RRB400M50JB2N9BC
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 5J0 920 911 G HW: 5J0 920 911 G
Component: KOMBI H04 0709
Serial number: 00000000000000
Coding: 410A00
Shop #: WSC 13765 031 00046
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_004_SK25.rod
VCID: 2C011643D684D00AD3B-8078
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 6N0-909-901-6R.clb
Part No SW: 6N0 909 901 HW: 6R7 937 087 P
Component: GW-K-CAN TP20 H30 0561
Revision: -1------
Coding: 032300
Shop #: WSC 13765 790 00046
VCID: 70B9C2333AACF4EAAF3-8024
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 0709
Serial number: 00000000000000
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
VCID: 6A8DD05B1CF00E3AE17-803E
No fault code found.
-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels:. 5N0-035-342.lbl
Part No SW: 5N0 035 342 G HW: 5N0 035 342 G
Component: SG EXT.PLAYER H19 0770
Revision: A1001003 Serial number: 7664821349
Coding: 010100
Shop #: WSC 13765 790 00000
VCID: 2B03155FD30AD732DA1-807E
2 Faults Found:
00447 - Function Limitation due to Over-Voltage
001 - Upper Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 6
Fault Frequency: 2
Reset counter: 130
Mileage: 0 km
Time Indication: 0
00532 - Supply Voltage B+
001 - Upper Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 2
Fault Frequency: 2
Reset counter: 130
Mileage: 80796 km
Time Indication: 0
Date: 2018.07.10.
Time: 13:08:08
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.clb
Part No: 6R0 423 156 C
Component: LenkhilfeTRW V278
Coding: 11240
Shop #: WSC 13765
VCID: 30390233F36CB4EAEF3-8064
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb
Part No SW: 5J0 035 161 G HW: 5J0 035 161 G
Component: Radio-SWING 005 0004
Revision: -----08S Serial number: SKZ4Z2N1219632
Coding: 010004000006
Shop #: WSC 13765 790 00046
VCID: 2615E46BC8E8EA5A05F-8072
1 Fault Found:
03272 - Control Module for Audio Interface
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 6
Fault Frequency: 9
Reset counter: 130
Mileage: 80262 km
Time Indication: 0
Date: 2018.04.16.
Time: 14:50:44
End----------(Elapsed Time: 00:54, VBatt start/end: 12.2V/12.2V)-----------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 5J-SK25 (6N0)
Scan: 01 03 08 09 15 17 19 25 2E 44 56
VIN: TMBFM25J0E3008424 Mileage: 83390km-51816miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
2E-Media Player 3 -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZA) Labels:. 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 HH HW: 03F 907 309 AK
Component: SIMOS10.22AH10 4040
Revision: --H10--- Serial number: CVN: 98BA8AEF
Coding: 00110056200400080000
Shop #: WSC 13765 031 00000
ASAM Dataset: EV_ECM12TFS02103F906070HH 004006
ROD: EV_ECM12TFS021_SK25.rod
VCID: 6FBBC14F2712EB12B69-803A
VINID: 91D49674215A0150C00081021063FF0F36
No fault code found.
Readiness: 0110 0101
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP90.clb
Part No SW: 6R0 907 379 AT HW: 6R0 907 379 AS
Component: ESP9.0i front H02 0001
Serial number: --------------
Coding: 43DC247D212300C8C218246B845500800804
Shop #: WSC 13765 031 00000
ASAM Dataset: EV_Brake1ESP90iBOSCH 003020
ROD: EV_Brake1ESP90iBOSCH_003_VW21.rod
VCID: 1079A2B35AEC94EACF3-8044
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels: 6R0-820-045-9AB.clb
Part No SW: 5J0 820 045 D HW: 5J0 820 045 D
Component: Man AC H02 0202
Revision: 0004SH02
VCID: 2615E46BC8E8EA5A05F-8072
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels:. 6R0-937-08x-09.clb
Part No SW: 6R7 937 087 P HW: 6R7 937 087 P
Component: PQ25 BCM H30 0561
Revision: -1------ Serial number: --------------
Coding: 25980B3808C92400922008002C2B08C00040400F60000000020010000000
Shop #: WSC 13765 790 00046
VCID: 51FF67B791E6DDE280D-8004
Subsystem 1 - Part No SW: 6R0 959 802 AN HW: 6R0 959 802 AN Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 006 5210
Serial number: 13102556130502182409
Coding: 030000
Subsystem 2 - Part No SW: 6R0 959 801 AL HW: 6R0 959 801 AL Labels: 6R0-959-801.CLB
Component: J387__TSG_BT 006 5210
Serial number: 13102561130502175420
Coding: 020000
Subsystem 3 - Part No: 5J0 951 172
Component: DWA-Sensor H03 H03 1211
Subsystem 4 - Part No: 1K0 951 605 C
Component: LIN BACKUP HORN H05 H05 1501
Subsystem 5 - Part No: 5J0 951 172
Component: DWA-Sensor H03 H03 1211
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels:| 5K0-959-655.clb
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10AirbagT2C H10 0020
Revision: -------- Serial number: 003GX01RBCX7 Dataset Number: t00301685J0 0001
Coding: 003243
Shop #: WSC 13765 790 00046
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250.rod
VCID: 4ACD70DB7C30EE3AC17-801E
Crash sensor for side airbag: driver side:
Serial number: 3495RRB401I50IC4GPGX
Front Passenger's Side Airbag Crash Sensor:
Serial number: 3505RRB400M50JB2N9BC
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels:| 5K0-920-xxx-17.clb-SRI1
Part No SW: 5J0 920 911 G HW: 5J0 920 911 G
Component: KOMBI H04 0709
Serial number: 00000000000000
Coding: 410A00
Shop #: WSC 13765 031 00046
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_004_SK25.rod
VCID: 2C011643D684D00AD3B-8078
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels:. 6N0-909-901-6R.clb
Part No SW: 6N0 909 901 HW: 6R7 937 087 P
Component: GW-K-CAN TP20 H30 0561
Revision: -1------
Coding: 032300
Shop #: WSC 13765 790 00046
VCID: 70B9C2333AACF4EAAF3-8024
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels:| 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 0709
Serial number: 00000000000000
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
VCID: 6A8DD05B1CF00E3AE17-803E
No fault code found.
-------------------------------------------------------------------------------
Address 2E: Media Player 3 (J650) Labels:. 5N0-035-342.lbl
Part No SW: 5N0 035 342 G HW: 5N0 035 342 G
Component: SG EXT.PLAYER H19 0770
Revision: A1001003 Serial number: 7664821349
Coding: 010100
Shop #: WSC 13765 790 00000
VCID: 2B03155FD30AD732DA1-807E
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.clb
Part No: 6R0 423 156 C
Component: LenkhilfeTRW V278
Coding: 11240
Shop #: WSC 13765
VCID: 30390233F36CB4EAEF3-8064
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels:. 5M0-035-1xx-56.clb
Part No SW: 5J0 035 161 G HW: 5J0 035 161 G
Component: Radio-SWING 005 0004
Revision: -----08S Serial number: SKZ4Z2N1219632
Coding: 010004000006
Shop #: WSC 13765 790 00046
VCID: 2615E46BC8E8EA5A05F-8072
No fault code found.
End----------(Elapsed Time: 00:52, VBatt start/end: 13.6V/13.8V)-----------Prior to commencing the cruise and MFSW installs, we have changed all front light bulbs for LED replacement variety (H7, H4 & W5W), and the rear number plate lamps for LED C5W festoon lamps - none of these have caused any issues.
We have upgraded the base head unit for aftermarket one as here
https://www.amazon.co.uk/dp/B083TBTSWC?ref=ppx_yo2ov_dt_b_fed_asin_title
but again, nothing has been evident with the system since installing this.
During the course of last weekend, I have added the cruise control system with changing the column stalks and adding a new short loom from the column stalks, via the BCM T73B plug, fusebox and finally the T94 plug of the engine ECU, all as per the details below.
With hindsight, it would have been sensible for me to have tried to take another scan of the car before committing to the retrofits, but my mind was more focused on the physical challenge ahead of getting all of the cabling installed, and based on the understanding that the new looms come pre-fitted with connector ends, short of getting them in the wrong hole position, I felt the connections shouldn't pose any issue once the plugs were all installed again as the plugs have a very positive connection with their respective female sockets.
I have added a flat bottomed MFSW following the link that's posted in the first page of the cruise control info as below
https://uk-polos.net/viewtopic.php?t=54171
Whilst the instructions were easy enough to follow there is one difference in the set up from the original posters car to my sons Fabia, that being the colour of the wire located in pin 17 of the BCM white plug.
In the original posters car it was violet/white, whilst in my sons car it was grey/white, all the other cables in the plug appeared to be the same colours in both cars so i just put this down to a quirk difference between the VW and Skoda brands.
Having installed all of the cabling and got the car back together I came to code the new parts but couldn't get VCDS to connect with any module in the car.
I have tested the port etc and provide photos below of VCDS dialogue boxes returned
I've only posted the failed response from the engine and central electrics controllers, but I got a fail response from all controllers both under auto scan and individual controller requests.
Just to confuse things even more, I can access the controllers when I use Carista and OBDEleven.
I have been able to add the coding for the cruise and MFSW, but the car now throws fault codes for the steering angle sensor, and cruise set condition??
Below codes pulled using Carista 28/10/24 at 21.04hrs
Code:
Engine:
06118 - Cruise Control Set Signal
Freeze frame
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 255
Odometer reading: 54180.4 miles
Engine rpm: 763 RPM
Normed load value: 12.2 %
Vehicle speed: 0 mph
Coolant temperature: 140 °F
Intake air temperature: 93 °F
Ambient air pressure: 14.5 PSI
Voltage terminal 30: 13.609 V
ABS:
00272 - Steering angle sensor: faulty
Freeze frame
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 228
Odometer reading: 54180.4 miles
00987 - Lost Communication With Steering Angle Sensor Module
Freeze frame
Priority: 2
Malfunction frequency counter: 2
Unlearning counter: 40
Odometer reading: 54180.4 miles
00994 - Steering angle sensor: faulty
Freeze frame
Priority: 2
Malfunction frequency counter: 2
Unlearning counter: 13
Odometer reading: 54180.4 miles
Obtained with Carista 8.7.1 for Android.
Below codes pulled using OBDEleven 28/10/24 at 21.13hrs
OBDeleven data log
Date: 2024-10-28 21:13
VIN: TMBFM25J0E3008424
Car: Skoda Fabia Monte Carlo
Year: 2014
Body type: 5-dr hatchback
Engine: CBZA
Mileage: 87190 KM
---------------------------------------------------------------
01 Engine
System description: SIMOS10.22A
Software number: 03F906070HH
Software version: 4040
Hardware number: 03F907309AK
Hardware version: H10
ODX name: EV_ECM12TFS02103F906070HH
ODX version: 004006
Long coding: 00110056202400080000
Trouble codes:
No trouble codes found
---------------------------------------------------------------
02 Transmission
Trouble codes:
No trouble codes found
---------------------------------------------------------------
03 Brakes
System description: ESP9.0i front
Software number: 6R0907379AT
Software version: 0001
Hardware number: 6R0907379AS
Hardware version: H02
Serial number: --------------
ODX name: EV_Brake1ESP90iBOSCH
ODX version: 003020
Long coding: 43DC247D212300C8C218246B845500800804
Trouble codes:
B116804 - Steering angle sensor Faulty
Intermittent
Mileage: 87195 km
Priority: 2
Malfunction frequency counter: 1
Unlearning counter: 40
Unknown ambient data: 0002000202B600480000FF00
---------------------------------------------------------------
08 Air Conditioning
System description: Man AC
Software number: 5J0820045D
Software version: 0202
Hardware number: 5J0820045D
Hardware version: H02
Trouble codes:
No trouble codes found
---------------------------------------------------------------
09 Central Electrics
System description: PQ25 BCM
Software number: 6R7937087P
Software version: 0561
Hardware number: 6R7937087P
Hardware version: H30
Serial number: --------------
Long coding: 3C800F3820EB2400922000001C2B98C800C8400F40240000020010000000
Subsystems:
System description: J386__TSG_FT
Software number: 6R0959802AN
Software version: 5210
Hardware version: 006
Serial number: 13102556130502182409
Long coding: 030000
System description: J387__TSG_BT
Software number: 6R0959801AL
Software version: 5210
Hardware version: 006
Serial number: 13102561130502175420
Long coding: 020000
System description: DWA-Sensor H03
Software number: 5J0951172
Software version: 1211
Hardware version: H03
System description: LIN BACKUP HORN H05
Software number: 1K0951605C
Software version: 1501
Hardware version: H05
System description: DWA-Sensor H03
Software number: 5J0951172
Software version: 1211
Hardware version: H03
Trouble codes:
No trouble codes found
---------------------------------------------------------------
15 Airbag
System description: VW10AirbagT2C
Software number: 6R0959655K
Software version: 0020
Hardware number: 6R0959655K
Hardware version: H10
Serial number: 003GX01RBCX7
ODX name: EV_AirbaVW10BPAVW250
ODX version: A01001
Long coding: 003243
Trouble codes:
No trouble codes found
---------------------------------------------------------------
16 Steering Column
Trouble codes:
No trouble codes found
---------------------------------------------------------------
17 Dashboard
System description: KOMBI
Software number: 5J0920911G
Software version: 0709
Hardware number: 5J0920911G
Hardware version: H04
Serial number: 00000000000000
ODX name: EV_Kombi_UDS_VDD_RM09
ODX version: A04723
Long coding: 410800
Trouble codes:
No trouble codes found
---------------------------------------------------------------
19 Gateway
System description: GW-K-CAN TP20
Software number: 6N0909901
Software version: 0561
Hardware number: 6R7937087P
Hardware version: H30
Long coding: 032300
Trouble codes:
No trouble codes found
---------------------------------------------------------------
25 Immobilizer
System description: IMMO
Software number: 5K0953234
Software version: 0709
Hardware number: 5K0953234
Hardware version: H04
Serial number: 00000000000000
ODX name: EV_Immo_UDS_VDD_RM09
ODX version: A03710
Long coding: 000000
Trouble codes:
No trouble codes found
---------------------------------------------------------------
37 Navigation
Trouble codes:
No trouble codes found
---------------------------------------------------------------
44 Steering Assistance
System description: LenkhilfeTRW V278
Software number: 6R0423156C
Coding: 11240
Trouble codes:
No trouble codes found
---------------------------------------------------------------
46 Comfort System
Trouble codes:
No trouble codes found
---------------------------------------------------------------
55 Headlight Regulation
Trouble codes:
No trouble codes found
---------------------------------------------------------------
56 Radio
System description: RadioSK46MID
Software number: 3TD035156
Software version: 0010
Hardware number: 3TD035156
Hardware version: 006
Trouble codes:
No trouble codes found
---------------------------------------------------------------
76 Parking Assistance
Trouble codes:
No trouble codes found
---------------------------------------------------------------
77 Telephone
Trouble codes:
No trouble codes found
==================================================================================================================Since taking the above, log I have turned off the coding applications for the MFSW and cruise using OBD Eleven, and the cruise fault no longer appears, but the steering angle fault is persistent.
I have followed other forum advice to cure the steering angle fault, dropping the cables off the battery waiting 5mins, turning the wheel from lock to lock before reapplying power, still nothing.
I have also followed other methods with engine running and turning fully left and hold for 10 seconds, then fully right and hold for 10 seconds but this has proved fruitless too.
Whilst scrolling through one of the other threads about the steering angle issue, I came across a suggestion that the steering angle fault could be caused by having the squib ring drop out of sync with it's original programmed position in relation to the centre / straight ahead steering position - this might be relevant in my case, as when moving the squib ring from the original set of columns stalks to the new ones for cruise, the position of the ring moved, and in all honesty I wasn't sure whether it had moved clockwise or anticlockwise, so I adjusted the squib to the approximate centre position.
One thing that was very apparent was that the squib has 7.5 turns end to end, whereas the steering only has 4 turns lock to lock, so it's quite possible that the approx. centre of the squib is 1 rotation out of phase, one way or another.
I appreciate there's a lot of possibilities in the mix, but I'm interested in any pointers as to where to start, short of removing everything and starting again, but I'm not sure that would cure the VCDS non reading issue??
