DSG7 transmission using VCDS

[gerberauto]

I have a question, in the instructions of VCDS when you click transmission it gets you to the screen with coding and basic settings, when you press adaption, you will get the adaption screen.

I my case I can log in with 12345, I can do the coding, but the adaption button is greyed out.
Can anyone please explain why?

Thank you,
chris

P.S.
here is the Transmission in need to do the adaption:
Friday,02,May,2014,12:29:54:59804
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.2.0
Data version: 20140212


VIN: License Plate: PGI764
Mileage: Repair Order: 5214



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Address 02: Auto Trans
Control Module Part Number: 0AM 300 048 M
Component and/or Version: GSG DSG AG7 431 1813
Software Coding: 0000020
Work Shop Code: WSC 10001
VCID: 3A7BD3FC75B605CE953-806F

Misc.
VCDS Info:
Labels: 0AM-300-04x.lbl

 

[Uwe]

A grayed-out function button is normally indicative of the control module in question not using/supporting that function. Not every control module supports every function. "Adaptations" of in that TCM look to be done via the Basic Settings function, just like a "Throttle Body Adaptation" (VW's terminology) is actually done via Basic Settings and why I've discouraged that particular phrase, preferring to use "Throttle Body Alignment" instead.

-Uwe-

 

[gerberauto]

Uwe,

But when you replace the clutch, there is an adaption or adjustment process needed after the repair, similar as the 6speed AT.
I know, the problem might be on the manufacturers side, but any idea, how to do it?

 

[Sebastian]

Follow the instructions in our WIKI and you should be good to go.

 

[gerberauto]

Follow the instructions in our WIKI and you should be good to go.

Thank you very much, I will try that procedure today.
I have send you a PM.