- Joined
- Feb 22, 2024
- Messages
- 1
- Reaction score
- 0
- Location
- Austin, TX, USA
- VCDS Serial number
- C?ID=520048
I replaced the downstream O2 sensor on Bank 1 of my 2015 S4. This fixed the catalytic converter code I was getting, but now have code below. Has anyone seen this and found a fix? Do you know a part number for the sensor?
13813 - Sensor for Cylinder Head Temperature
P017D 00 [00100101] - Short to Plus
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 142346 km
Date: 2024.02.21
Time: 20:49:03
Engine RPM: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 30 °C
Intake air temperature: 30 °C
Ambient air pressure: 970 mbar
Voltage terminal 30: 11.679 V
Unlearning counter according OBD: 40
Engine speed: actual: 0 /min
MAF_ENVD: 0.00000 mg/stroke
Coolant temperature (unfiltered): 30.75 °C
Engine: operating status: ES
Battery voltage: 11.679688 V
Vehicle speed: actual: 0 km/h
13813 - Sensor for Cylinder Head Temperature
P017D 00 [00100101] - Short to Plus
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Mileage: 142346 km
Date: 2024.02.21
Time: 20:49:03
Engine RPM: 0.00 /min
Normed load value: 0.0 %
Vehicle speed: 0 km/h
Coolant temperature: 30 °C
Intake air temperature: 30 °C
Ambient air pressure: 970 mbar
Voltage terminal 30: 11.679 V
Unlearning counter according OBD: 40
Engine speed: actual: 0 /min
MAF_ENVD: 0.00000 mg/stroke
Coolant temperature (unfiltered): 30.75 °C
Engine: operating status: ES
Battery voltage: 11.679688 V
Vehicle speed: actual: 0 km/h