Hey all, My first post here. My AAA vr6 has been acting up lately. Idle fluctuates about 50-100 rpm when engine reaches operating temp. Idle is steady when cold. I cleaned the T.B and attempted to run the adaption. Adaption gives me an error in the third or forth block. Batt voltage is above 11.5, temp between 5-95c and engine is off. I hear a single click from the T.B when attempting the adaption. I sent the T.B to BBA reman and it was tested with no fault found. I get T.P 1 at 4.4v and T.P 2 at 3.7v. Any ideas?