Hello, i am trying to make calibration of 34- level control, but without sucess, where can be problem? always its stays on set level control... and error about safety reasons
Code:
Friday,10,November,2023,15:00:16:60158
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 23.11.0.0 (x64) HEX-V2 CB: 0.4643.4
Data version: 20231027 DS351.0
www.Ross-Tech.com
VIN: License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 34: Level Control Labels: 4G0-907-553.clb
Control Module Part Number: 4G0 907 553 G HW: 4G0 907 553 F
Component and/or Version: LUFE-DAEMPFER H19 0783
Software Coding: 008006
Work Shop Code: WSC 02391 785 00200
ASAM Dataset: EV_AirSuspe 003025 (AU64)
ROD: EV_AirSuspe_VW51.rod
VCID: 2F3AEABA3793E392869-807A
2 Faults Found:
403200 - Function Shut-Off Active
C10C8 00 [00001001] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 4
Reset counter: 207
Mileage: 244384 km
Date: 2023.11.10
Time: 14:43:58
367877 - Ride Height Not Learned
C1044 00 [00001001] - -
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 2
Fault Frequency: 1
Reset counter: 207
Mileage: 244384 km
Date: 2023.11.10
Time: 14:43:58
