Bordnetz computer controller

[Wackofcb]

Good afternoon
I have a question about my board computer controller I bought a second-hand with 30 bits but in my vcds it shows from 22 to 29 bit nothing is not programmed does anyone have an idea please

Grts

 

[langers2k]

Your gonna have to give some more information...

Start by posting an autoscan or at the very least the original and new part numbers

 

[Wackofcb]

Sorry forgot

Old

Address 09: Cent. Elect.        Labels:. 3C0-937-049-23-H.lbl
   Part No SW: 3C0 937 049 AE    HW: 3C0 937 049 AE
   Component: Bordnetz-SG     H52 2002
   Revision: 00H52000    Serial number: 00000004841406
   Coding: F1000A110000100040110D330000830000590105640000
   Shop #: WSC 00046 123 12345
   VCID: 6C81CA6FCA8833BB037-8038

   Subsystem 1 - Part No: 1Z1 955 119 C  Labels: 1KX-955-119.CLB
   Component: Wischer 030407 022  0601
   Coding: 00057271
   Shop #: WSC 00046

   Subsystem 2 - Part No: 1K0 955 559 AB  Labels: 1K0-955-559-AF.CLB
   Component: RLS     030407 020  0105
   Coding: 00995365
   Shop #: WSC 00046

1 Fault Found:
00926 - Terminal 30
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 75
                    Mileage: 247871 km
                    Time Indication: 0
                    Date: 2005.09.13
                    Time: 31:63:63

             Freeze Frame:
                        ON
                    Voltage: 5.00 V
                        ON
                        ON
                        OFF
                        OFF
                        OFF

New

Address 09: Cent. Elect.        Labels:. 3C0-937-049-30-H.lbl
   Part No SW: 3C0 937 049 AJ    HW: 3C0 937 049 AJ
   Component: Bordnetz-SG     H54 2202 
   Revision: 00H54000    Serial number: 00000007017679
   Coding: 61000E030004140043110D000000000000097F075C00000C000000000000
   Shop #: WSC 00046 000 00000
   VCID: 71BFDB1BEDAADE53301-8024

   Subsystem 1 - Part No: 1Z1 955 119 C  Labels: 1KX-955-119.CLB
   Component: Wischer 030407 022  0601 
   Coding: 00057271
   Shop #: WSC 00046 

   Subsystem 2 - Part No: 1K0 955 559 AB  Labels: 1K0-955-559-AF.CLB
   Component: RLS     030407 020  0105 
   Coding: 00995365
   Shop #: WSC 00046 

4 Faults Found:
01499 - Bulb for High-Beams; Right (M32)
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 77
                    Mileage: 247891 km
                    Time Indication: 0
                    Date: 2005.09.13
                    Time: 31:63:63

             Freeze Frame:
                        ON
                    Voltage: 5.00 V
                        ON
                        ON
                        OFF
                        OFF
                        OFF

00978 - Lamp for Low Beam; Left (M29)
            010 - Open or Short to Plus
             Freeze Frame:
                    Fault Status: 01101010
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 77
                    Mileage: 247891 km
                    Time Indication: 0
                    Date: 2005.09.13
                    Time: 31:63:63

             Freeze Frame:
                        ON
                    Voltage: 5.00 V
                        ON
                        ON
                        OFF
                        OFF
                        OFF

Thanx

 

[Spacewalker]

take a picture of every options is code now
install new , and 1st - mark what was select in your old
then you can play with extra options
copy - pasye old coding to new one will not work