Audi A4 Avant retrofit 6D Trunk Electric

   #1  

Ettore

Pirate
Joined
Jun 1, 2015
Messages
4
Reaction score
0
Location
Italy
Hello,
I have a problem with my 2014 Audi A4 Avant.
I do retrofit electric trunk and keyless.

I replaced my 46 Central Conv. 8K0907064JD with new 8K0907064JF from Audi A5 which had keyless but not the electric trunk.
I was in Audi for unlocking CP, I did not make the configuration of the factory, I transferred the long queues and the channel values ​​of my 46.

I installed the electric servomotors in the trunk.
In 19 CAN Gateway I activated the 6D Trunk Elect.

In the 46 Central Conv. I tried to turn the Byte 6 Bit 5 CLOSING AID, does not accept encoding and returns the following error:
Coding rejected:
Error 31: request out of range


19 CAN Gateway:
00317 - Rear Lid Control Module (J605)
004 - No Signal / Communication



6D Trunk Elect.
2 Faults Found:
16347 - Control Module - EEPROM Error
014 - Defective


02364 - Closing Assistance
008 - Signal implausible



The problem is due to the fact that the control unit 46 Central Conv. comes from A5 without electric trunk?

Can I change the channels of 46 Central Conv. in order to make it work?


Help me please, thank you.


Ettore
 
   #2  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,893
Reaction score
21,337
Location
USA
VCDS Serial number
HC100001
   #5  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,893
Reaction score
21,337
Location
USA
VCDS Serial number
HC100001
How can I fix this error?
I'm afraid you're not going to get any help here while you're using a pirated version of the product we make our living from.

-Uwe-
 
   #6  

Ettore

Pirate
Joined
Jun 1, 2015
Messages
4
Reaction score
0
Location
Italy
I'm afraid you're not going to get any help here while you're using a pirated version of the product we make our living from.

-Uwe-
Is not a valid software?
A colleague of mine had a scan with his PC, I thought it was original, sorry.
 
Top