How to power up ign without key? 2019 Golf

[racofuy]

Hi guys, my keys were stolen to my 2019 Golf (keyless entry- kessy) so I'm now stuck having to wait 2 weeks for a new key to arrive but 2 of the windows are down.
Is there any way to power up the ignition to raise the windows?
Someone told me to bypass the terminal 15 relay (which I'm assuming is the J329 #645 on the interior fuse panel) but this doesn't power up the ign.
All I need to do is raise the windows and then wait for my key to arrive.

 

[EuroX]

Not sure if this will work but just to communicate with modules in the car you can try jumping terminal 15 at the obd port. Then maybe with scanner maybe output test can be done perhaps. Never tried or ran into this issue.

 

[DV52]

hmm....... duplicate post -naughty!!!

 

[racofuy]

Sorry, I'm a little desperate. Car is outside.

 

[racofuy]

Not sure if this will work but just to communicate with modules in the car you can try jumping terminal 15 at the obd port. Then maybe with scanner maybe output test can be done perhaps. Never tried or ran into this issue.

Thanks, happy to try but not having a wiring diagram I'm unsure of which wires to jump.

 

[Uwe]

All I need to do is raise the windows and then wait for my key to arrive.

How are you going to get the matched to the car?

There is some dance with the brake pedal, the emergency flasher switch and the high beam switch that may get you powered up enough to run the windows up, either via the switches, or via Output Tests in VCDS. However, I don't recall the exact details.

In the meanwhile, I might suggest covering the car with a tarp to keep rain out?

-Uwe-

 

[racofuy]

Thanks Uwe, the car will get transported to the dealer when the key arrives and they will code it (2 weeks)
Yes have a tarp on now but prefer to get the windows up.
If you would be able to tell me more about the dance I'm more than willing to try it.

 

[EuroX]

You would need to put a jumper wire on the backside of the obd2 port between pin 16 and pin1 you are jumping ignition this way. The cluster may not wake up or it may regardless it should wake most if not all modules up in the car.

 

[Morski]

Possibly look at removing the door panels and remove the motor to the window and pull the glass up with your hand. Reinstall motor and panel