Basic Settings wont work

   #1  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
Audi A3 2.0 tdi 170 ps BMN engine. I replaced my turbo ,just the central core but it came with the vane adjusting screw not set so I need to use Engine ,Basic Settings,Group 11(Charge Pressure Control) to cycle the turbo to reset the screw to give me 80 mbar change between vanes open and closed.
The four windows initially show 800rpm ------- 1009.6mbar(actual) 3.451v(duty cycle)
I press "ON" ,press brake and throttle and instead of the turbo cycling and revs going to 1400 rpm the engine stays at idle and the windows change to:
1.0 BRAKES CLUTCH1 OPERATE
I`m new to VCDS so I`m probably doing something wrong.Could anyone enlighten me please?
SCAN below
Thanks
Neil

Code:
Wednesday,26,March,2014,19:10:30:44437
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.2.0
Data version: 20140212

Dealer/Shop Name: Bold Engineering

VIN: WAUZZZ8P17A136397   License Plate: N8OLD
Mileage: 142250km-88390mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8P (1K0)
Scan: 01 03 08 09 15 16 17 19 22 25 42 44 46 52 56 62 72

VIN: WAUZZZ8P17A136397   Mileage: 142250km/88390miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
22-AWD -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 03G-906-018-BMN.clb
   Part No SW: 03G 906 018 DN    HW: 03G 906 018 DN
   Component: R4 2.0l PPD1.2      4350  
   Revision: --H42---    Serial number: AUX7Z0FDFNC11D
   Coding: 0000072
   Shop #: WSC 66565 257 00032
   VCID: 74E7D3921716BABE8FF-8021

No fault code found.
Readiness: N/A

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-A.lbl
   Part No SW: 1K0 907 379 AB    HW: 1K0 907 379 AB
   Component: ESP 4MOTION MK60    0102  
   Revision: 00H13001    
   Coding: 0023170
   Shop #: WSC 06314 000 00000
   VCID: 72EBD58A6D02B48E9D3-8027

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 8P0-820-043.lbl
   Part No SW: 8P0 820 043 AC    HW: 8P0 820 043 AC
   Component: KlimavollautomatH19 0360  
   Revision: 082189      Serial number: 8P0820043AC   
   Shop #: WSC 06314 000 00000
   VCID: 6DD1C6F6743C6B76401-8038

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 8P0-907-279-23-H.lbl
   Part No SW: 8P0 907 279 F    HW: 8P0 907 279 F
   Component: Bordnetz-SG     H43 1201  
   Revision: 00H43000    Serial number: 00000006497371
   Coding: 01884F01B014100000160000160000000008FE175C0100
   Shop #: WSC 06314 000 08192
   VCID: 408F4F42132E561EDB7-8015

   Subsystem 1 - Part No: 8P2 955 119 E  Labels: 1KX-955-119.CLB
   Component: Wischer AU350   H01 0130  
   Coding: 00062736
   Shop #: WSC 06314  

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 8P0-959-655-94.lbl
   Part No SW: 8P0 959 655 C    HW: 8P0 959 655 C
   Component:    Airbag 9.41  H13 4260  
   Revision: 91H13426    Serial number: 003620G37HZ3  
   Coding: 0071612
   Shop #: WSC 06314 000 00000
   VCID: 428B454A1D22440ECD3-8017

   Subsystem 1 - Serial number: 6332DRB404559013A

   Subsystem 2 - Serial number: 6342DRB404559113C

   Subsystem 3 - Serial number: 63528RB401F2E627R

   Subsystem 4 - Serial number: 63628RB401F2E499Z

   Subsystem 5 - Serial number: 63729RB401E5BC65.

   Subsystem 6 - Serial number: 63829RB401E5BC08Z

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
   Part No SW: 1K0 953 549 AH    HW: 1K0 953 549 AH
   Component: J0527           036 0070  
   Coding: 0000012
   Shop #: WSC 06314 000 00000
   VCID: 78FFE7A20B7EDEDEA37-802D

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 8P0-920-xxx-17-MY7.lbl
   Part No SW: 8P0 920 981 F    HW: 8P0 920 981 F
   Component: KOMBIINSTR. VDO H20 0570  
   Revision: D0H20004    Serial number: 224DF004008288
   Coding: 0005418
   Shop #: WSC 00694 210 83007
   VCID: 3B7538AE7AC835C68E5-806E

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 1K0-907-530-V2.clb
   Part No SW: 1K0 907 530 K    HW: 1K0 907 951 
   Component: J533__Gateway   H12 0170  
   Revision:   H12       Serial number: 3300106B2204E4
   Coding: BD3F034007002103
   Shop #: WSC 06314 000 00000
   VCID: 2F6D1CFEBEB0D96632D-807A

No fault code found.

-------------------------------------------------------------------------------
Address 22: AWD        Labels: 1K0-907-554.lbl
   Part No: 1K0 907 554 L
   Component: Haldex 4Motion      0116  
   Coding: 0000001
   Shop #: WSC 00000 000 00000
   VCID: 3663299A41EAE8AE71B-8063

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
   Part No SW: 8P0 920 981 F    HW: 8P0 920 981 F
   Component: KOMBIINSTR. VDO H20 0570  
   Revision: D0H20004    Serial number: AUX7Z0FDFNC11D
   Shop #: WSC 00000 000 00000
   VCID: 3B7538AE7AC835C68E5-806E

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver        Labels: 8P0-959-801-MIN2.lbl
   Part No: 8P0 959 801 H
   Component: Tuer-SG         020 0090  
   Coding: 0000688
   Shop #: WSC 06314 000 00000
   VCID: 408F4F42132E561EDB7-8015

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
   Part No: 1K2 909 144 L
   Component: EPS_ZFLS Kl.079 H07 1806  
   Shop #: WSC 06314 000 00000
   VCID: 35612E965CECE3B6781-8060

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 8P0-959-433.lbl
   Part No: 8P0 959 433 F
   Component:    KSG          H05 0070  
   Coding: 9980202002186D098505489FC637
   Shop #: WSC 06314 000 00000
   VCID: 3F8D4CBE6ED029E6A2D-806A

   Subsystem 1 - Part No: 1K0 951 605 C
   Component: LIN BACKUP HORN H03 1301

   Subsystem 2 - Part No: 1K0 907 719 C
   Component: Neigungssensor  005 0003

   Subsystem 3 - Part No: 8P0 951 177 
   Component: Innenraumueberw.H04 0020

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass.        Labels: 8P0-959-802-MIN2.lbl
   Part No: 8P0 959 802 H
   Component: Tuer-SG         020 0090  
   Coding: 0000688
   Shop #: WSC 06314 000 00000
   VCID: 41894A4618245F16D49-8014

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio        Labels: 8J0-035-1xx-56.clb
   Part No SW: 8P0 035 195 G    HW: 8P0 035 195 G
   Component: R Symphony2+    H14 0220  
   Revision: 00H14000    Serial number: AUZ1Z4F9005576
   Coding: 0010301
   Shop #: WSC 06314 000 00000
   VCID: 3663299A41EAE8AE71B-8063

1 Fault Found:
01044 - Control Module Incorrectly Coded 
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 255
                    Time Indication: 15


-------------------------------------------------------------------------------
Address 62: Door, Rear Left        Labels: 8P4-959-801.lbl
   Part No: 8P4 959 801 D
   Component: Tuer-SG         020 0070  
   Coding: 0000144
   Shop #: WSC 06314 000 00000
   VCID: 408F4F42132E561EDB7-8015

No fault code found.

-------------------------------------------------------------------------------
Address 72: Door, Rear Right        Labels: 8P4-959-802.lbl
   Part No: 8P4 959 802 D
   Component: Tuer-SG         020 0070  
   Coding: 0000144
   Shop #: WSC 06314 000 00000
   VCID: 41894A4618245F16D49-8014

No fault code found.

End   ---------------------------------------------------------------------
 
Last edited by a moderator:
   #2  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001
Hmm. I can't say I've ever done one of these, but it seems to me the ECU is asking you to operate the brakes and the clutch, not the brakes and the throttle.

Have you tried doing what the ECU is asking?

-Uwe-
 
   #3  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
UWE
Thanks for the quick reply.The writing on the screen says press brakes and throttle.I`ll try brakes and clutch see what happens.
Neil
 
   #4  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001
Well, I can't see what's on your screen, but what you wrote here is:

1.0 BRAKES CLUTCH1 OPERATE
;)

-Uwe-
 
   #5  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
UWE
It`s underneath the 4 windows.When I click on "Charge Pressure Control" that block changes to "Engine on ,Press On ,press brake and throttle. That`s when all the windows change.When I press Off, they change back to what they were originally.Can`t reply now until tomorrow .
Thanks
Neil
 
   #6  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001
Niel,

OK, if you can't get it working tomorrow, please make screen-shots of everything. We'll never be able to reproduce this here since we didn't get any diesels with PPD engine management.

-Uwe-
 
   #7  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
UWE
Sorted. It`s a bit ambiguous as one screen says "brakes and throttle" but windows say "brakes and clutch". Tried brakes and clutch and it works superbly.Managed to set the stop screw correctly ,a job I must say that Audi main dealer failed to do twice.
Thanks again.
Neil
 
  • Like
Reactions: Uwe
   #8  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001
Neil, you're very welcome.

Can we impose on you to run it again and make screen-shots so we might see if there's a way for us to correct the apparently misleading "brakes and throttle" message?

-Uwe-
 
   #9  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
UWE
How do I take a screen shot?
 
   #10  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001
The PrintScreen button on your keyboard will stuff the entire contents of your screen into the Windows Clipboard. From there, you can paste into Paint or Word or (my personal favorite for this kind of thing) Irfanview, then crop and Save As. If you're saving a screen shot as an image, .PNG is almost always a better choice than .JPG. (but .JPG is better for photos).

Pro-Tip: If you use Alt + Printscreen, you will get only the currently active window instead of the whole screen.

-Uwe-
 
   #11  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
UWE
Windows Vista doesn`t support clipboard and the Printscreen button has never worked on my laptop.I`ll take a photograph of the screen tomorrow and email it to Support@Ross-Tech.com for your attention.Hope that`s ok.
Regards
Neil
 
   #12  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001
I can accept that your PrintScreen key doesn't work, but the idea that the Windows Clipboard doesn't work in Windows Vista is, well, let's just say "incorrect". I realize that Vista was a relatively crappy version of Windows, but it wasn't totally unusable, at least if one turned User Account Control off. ;)

If your PrintScreeen button doesn't work, you may want to try some 3rd party Print Screen utility.

-Uwe-
 
   #13  

0120raptor

Verified VCDS User
Verified
Joined
Mar 31, 2014
Messages
24
Reaction score
9
Location
North West UK
VCDS Serial number
C?ID=210440
UWE
Sent that photo via email.Will sort out Print Screen when I have a minute. If you need any info from my car and I`m able to help please let me know.
Thanks
Neil
 
   #14  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,906
Reaction score
21,351
Location
USA
VCDS Serial number
HC100001


Hah! Our instructions must be for an automatic transmission car. ;)

-Uwe-
 
Top