VCDS connected properly but not working

   #1  

jozefvorisek

Unverified
Joined
May 2, 2021
Messages
4
Reaction score
0
Location
Slovakia
VCDS Serial number
LP/IP
Hi,

i've got the HEX-V2 cable for VW Golf 2010, which was working correctly for few days, but yesterday i've tried to connect it an it has a very strange problem. Cable was in, ignition on, VCDS program worked correctly, i tried to test it and it was saying all OK, but when i was trying to open some controle module (for example Engine) it was not working. VCDS tried to load it for a few second and then it just stopped working, it was like i never clicked on it. I could click on it hundred times, it never opens. Also vehicle scan didnt work. I think there is a problem since i tried to connect a different vehice (Passat B7), which doesnt worked either. Before that VCDS was working fine with my Golf. I tried to reinstall it. Any ideas what could that be? Thanks.
 
   #2  

Boki Ar

VCDS Distributor
Joined
Oct 27, 2014
Messages
1,591
Reaction score
1,660
Location
Arandjelovac, Serbia
VCDS Serial number
C?ID=57300
Hi,

Post here interface photo or HV2 serial number. Best is post Auto Scan from Golf, so we can help about problem.
 
  • Like
Reactions: Uwe
Top