VW Touareg (2006) level calibration question

   #1  

N867LC

Verified VCDS User
Verified
Joined
Aug 26, 2014
Messages
15
Reaction score
4
Location
Texas
VCDS Serial number
C?ID=199170
After some long and drawn out work. I'm trying to recalibrate the level control system on my Egg. I did this after I rebuilt the front end, but after a battery replace, and a few other system gremlins being chased out, the calibration has been lost.

I've followed the process, scanned the car, cleared the codes, found a few fuses put in the wrong places. Yet when I get to the save page in VCDS the vehicle gives me an error.

The vehicle goes through the motions of up and down. I'm sitting outside the vehicle so no open doors. The only code being thrown for the level control system is not calibrated.

Is there a hard reset, that needs to be done prior to going into the calibration mode?

Here is the scan if that helps.

Code:
Monday,30,March,2015,18:25:10:14552
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 14.10.2.0 (x64)
Data version: 20150311
www.Ross-Tech.com


VIN: WVGPT77L06D054863   License Plate: 
Mileage: 208880km-129792mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 7L (7L - VW Touareg (2003 > 11/2006))
Scan: 01 02 03 05 06 08 09 11 13 15 16 17 18 19 1C 22 29 32 34 36
          37 39 3C 46 47 55 56 57 64 65 68 69 6C 6D 6E 75 76 77
 
VIN: WVGPT77L06D054863   Mileage: 208880km-129792miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: Redir Fail!
   Part No SW: 070 906 016 CQ    HW: 028 101 196 2
   Component: V10 5,0L EDCG000AGMª8472  
   Revision: --H02---    Serial number: VWZ3Z0E6402710
   Coding: 0060575
   Shop #: WSC 31414 000 00000
   VCID: 61C95F86BB717229011-5140

No fault code found.
Readiness: 0 0 0 0 1 

-------------------------------------------------------------------------------
Address 02: Auto Trans        Labels: 09D-927-750.lbl
   Part No SW: 09D 927 750 DP    HW: 09D 927 750 DP
   Component: AL 750 6A           0856  
   Revision: 00H51000    Serial number:               
   Coding: 0000008
   Shop #: WSC 00000 000 00000
   VCID: 7F0DF9FE2DC5A4D9175-5140

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 7L0-907-379-MK25.lbl
   Part No: 7L0 907 379 G
   Component: ESP ALLRAD MK25     0203  
   Coding: 0022786
   Shop #: WSC 31414 000 00000
   VCID: 3D71C3F6674976C9459-5140

1 Fault Found:
00778 - Steering Angle Sensor (G85) 
            000 -  -  - Intermittent

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth.        Labels: None
   Part No SW: 7L0 909 137     HW: 5WK 484 92
   Component: G2 Kessy            6700  
   Revision: 67005614    Serial number: VWZ3Z0E6402710
   Coding: 0131304
   Shop #: WSC 31414 000 00000
   VCID: 70EF2AC2609BCBA19EF-515E

   Subsystem 1 - Part No: XXXXXXXXXXX 
   Component: ELV                 XXXX

5 Faults Found:
00181 - Access/Start Authorization Antenna (in Rear bumper) (R136) 
            011 - Open Circuit
01299 - Diagnostic Interface for Data Bus (J533) 
            005 - No or Incorrect Basic Setting / Adaptation - Intermittent
00955 - Key 1 
            002 - Lower Limit Exceeded
00956 - Key 2 
            002 - Lower Limit Exceeded
01330 - Central Control Module for Central Convenience (J393) 
            004 - No Signal/Communication - Intermittent

-------------------------------------------------------------------------------
Address 06: Seat Mem. Pass        Labels: None
   Part No: 7L0 959 760 
   Component: Sitzverstellung     0701  
   Shop #: WSC 00000 000 00000
   VCID: 77FD11DE05F59C995F5-5140

1 Fault Found:
01330 - Central Control Module for Central Convenience (J393) 
            004 - No Signal/Communication - Intermittent

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: 7L6-907-044.clb
   Part No: 7L6 907 044 T
   Component: CLIMAtronic 2+2     4222  
   Coding: 0020030
   Shop #: WSC 31414 000 00000
   VCID: 4581AB160F993E091D9-5140

   Subsystem 1 - Part No: 7L6 907 049 E
   Component: CLIMAtronic FOND    0400

2 Faults Found:
02379 - Positioning Motor for Left Side Vent (V299) 
            000 -  - 
02600 - Rear Right Temperature Flap Motor (V314) 
            000 -  - 

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels: 7Lx-937-049-V1.clb
   Part No: 7L6 937 049 N
   Component:                     3001  
   Coding: 0111836
   Shop #: WSC 31414 000 00000
   VCID: 479DA11E35952C19EF5-5140

4 Faults Found:
00070 - Starting Battery Voltage 
            008 - Implausible Signal - Intermittent
00668 - Supply Voltage Terminal 30 
            008 - Implausible Signal - Intermittent
01330 - Central Control Module for Central Convenience (J393) 
            004 - No Signal/Communication - Intermittent
00907 - Intervention load Management 
            000 -  - 

-------------------------------------------------------------------------------
Address 11: Engine II        Labels: Redir Fail!
   Part No SW: 070 906 016 CQ    HW: 028 101 196 2
   Component: V10 5,0L EDCG000AGSª8472  
   Revision: --H02---    Serial number: VWZ3Z0E6402710
   Coding: 0060575
   Shop #: WSC 31414 000 00000
   VCID: 61C95F86BB717229011-515E

3 Faults Found:
005784 - Please Check DTC Memory of Steering Wheel Electronics 
               P1698 - 000 -  - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 3
                    Reset counter: 255
                    Mileage: 208878 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 672 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Voltage: 11.55 V
                    Bin. Bits: 00001011
                    Bin. Bits: 00000000
                    (no units): 0.0

005782 - Powertrain Data Bus 
               P1696 - 000 - Implausible Message from Steering Column Controller - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 3
                    Reset counter: 255
                    Mileage: 208878 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 672 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Voltage: 11.55 V
                    Bin. Bits: 00001011
                    Bin. Bits: 00000000
                    (no units): 0.0

012547 - Motor for Intake Manifold Flap (V157) 
               P3103 - 000 - Malfunction - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 3
                    Reset counter: 255
                    Mileage: 208882 km
                    Time Indication: 0

             Freeze Frame:
                    RPM: 588 /min
                    Speed: 0.0 km/h
                    Load: 0.0 %
                    Voltage: 13.38 V
                    Bin. Bits: 00001000
                    Torque: 331.8 Nm
                    Torque: 0.0 Nm


-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 3D0-909-601.lbl
   Part No: 3D0 909 601 H
   Component: 05 Airbag 8.4E++H02 0562  
   Revision: BB38727     Serial number: 0010170?      
   Coding: 0012341
   Shop #: WSC 25053 444 59338
   VCID: 285F02A298CBC36106F-5140

   Subsystem 1 - Part No: 7L0 959 339 E
   Component: BF-Gewichtsens. 007 0009

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel        Labels: 7L6-953-549.lbl
   Part No: 7L6 953 549 H
   Component: Lenksäulenmodul     3401  
   Coding: 0010032
   Shop #: WSC 31414 000 00000
   VCID: 4487B61204A307010A7-515E

1 Fault Found:
01336 - Company Data Bus for Comfort System 
            014 - Defective - Intermittent

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 7L6-920-xxx-7LA.lbl
   Part No: 7L6 920 981 R
   Component: KOMBIINSTRUMENT RB8 3211  
   Coding: 0005231
   Shop #: WSC 31414 000 00000
   VCID: 489FA222388B2361E6F-5140

4 Faults Found:
02053 - Control Module for Transfer Case (J646) 
            004 - No Signal/Communication - Intermittent
01330 - Central Control Module for Central Convenience (J393) 
            004 - No Signal/Communication - Intermittent
01517 - Control Module for Trailer/Towing Sensor (J345) 
            004 - No Signal/Communication - Intermittent
00464 - Control Module with Display for Radio and Navigation (J503) 
            004 - No Signal/Communication

-------------------------------------------------------------------------------
Address 18: Aux. Heat        Labels: 7L6-819-008.lbl
   Part No: 7L6 815 071 D
   Component: Standheizung E1MAC   
   Coding: 0000100
   Shop #: WSC 31414 000 00000
   VCID: 3365E5CE510DB0B9A3D-5140

1 Fault Found:
02251 - Heater Unit Locked 
            000 -  - 

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
   Part No: 6N0 909 901 
   Component: Gateway K<>CAN      0101  
   Coding: 0000006
   Shop #: WSC 31414 000 00000
   VCID: 70EF2AC2609BCBA19EF-5140

6 Faults Found:
02053 - Control Module for Transfer Case (J646) 
            004 - No Signal/Communication - Intermittent
01330 - Central Control Module for Central Convenience (J393) 
            004 - No Signal/Communication - Intermittent
01517 - Control Module for Trailer/Towing Sensor (J345) 
            004 - No Signal/Communication - Intermittent
00484 - Vehicle Position Recognition Control Module (J603) 
            004 - No Signal/Communication - Intermittent
01308 - Control Module for Roof Electronics (J528) 
            004 - No Signal/Communication - Intermittent
00464 - Control Module with Display for Radio and Navigation (J503) 
            004 - No Signal/Communication

-------------------------------------------------------------------------------
Address 1C: Position Sensing        Labels: 7L6-919-879.lbl
   Part No: 7L6 919 879 A
   Component: JCI PathPoint       2200  
   Shop #: WSC 00000 000 00000
   VCID: 4581AB160F993E091D9-5140

1 Fault Found:
02519 - Display Module for Roof (J702) 
            004 - No Signal/Communication - Intermittent

-------------------------------------------------------------------------------
Address 22: AWD        Labels: None
   Part No: 0AD 927 755 BG
   Component: TRANSFERCASE        0126  
   Shop #: WSC 00000 000 00000
   VCID: 01097F065B31D229611-5140

No fault code found.

-------------------------------------------------------------------------------
Address 29: Left Light        Labels: 3D0-909-157.lbl
   Part No: 3D0 909 157 
   Component: EVG GDL+AutoLWR(l)  0001  
   Coding: 0000003
   Shop #: WSC 31414 000 00000
   VCID: 66C34C9A525F1511F43-5140

1 Fault Found:
00492 - Body Pitch Angle from Level Control Module 
            008 - Implausible Signal - MIL ON

-------------------------------------------------------------------------------
Address 34: Level Control        Labels: 7Lx-907-553-34.clb
   Part No: 7L0 907 553 F
   Component: LUFTFDR.-CDC- 3C3P1 3081  
   Coding: 0015521
   Shop #: WSC 31414 000 00000
   VCID: 3663DCDA427FA591843-5140

1 Fault Found:
01437 - Control Position not Learned 
            005 - No or Incorrect Basic Setting / Adaptation

-------------------------------------------------------------------------------
Address 36: Seat Mem. Drvr        Labels: None
   Part No: 7L0 959 760 
   Component: Sitzverstellung     0701  
   Shop #: WSC 00000 000 00000
   VCID: 77FD11DE05F59C995F5-5140

5 Faults Found:
02332 - Position Sensor for Backrest Adjustment (G440) 
            011 - Open Circuit - Intermittent
01916 - Lumbar Support Fore / Aft Adjustment Sensor (G375) 
            007 - Short to Ground - Intermittent
01916 - Lumbar Support Fore / Aft Adjustment Sensor (G375) 
            011 - Open Circuit - Intermittent
01915 - Lumbar Support Height Adjustment Sensor (G374) 
            011 - Open Circuit - Intermittent
01330 - Central Control Module for Central Convenience (J393) 
            004 - No Signal/Communication - Intermittent

-------------------------------------------------------------------------------
Address 39: Right Light        Labels: 3D0-909-158.lbl
   Part No: 3D0 909 158 
   Component: EVG GDL+AutoLWR(r)  0001  
   Coding: 0000003
   Shop #: WSC 31414 000 00000
   VCID: 67DD419E55550C19CF5-5140

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 7L0-959-933.lbl
   Part No: 7L0 959 933 J
   Component:    HSG              5115  
   Coding: 0000085
   Shop #: WSC 31414 000 00000
   VCID: 4385B50E01AD003933D-4B1A

   Subsystem 1 - Part No: 7L0 959 701 H
   Component: Tuersteuergeraet FS 0201

   Subsystem 2 - Part No: 7L0 959 702 H
   Component: Tuersteuergeraet BF 0201

   Subsystem 3 - Part No: 7L0 959 703 D
   Component: Tuersteuergeraet HL 0201

   Subsystem 4 - Part No: 7L0 959 704 D
   Component: Tuersteuergeraet HR 0201

12 Faults Found:
00927 - Terminal 30 (Right) 
            011 - Open Circuit - Intermittent
01516 - Terminal 30; Left 
            011 - Open Circuit - Intermittent
00926 - Terminal 30 
            011 - Open Circuit - Intermittent
00668 - Supply Voltage Terminal 30 
            002 - Lower Limit Exceeded - Intermittent
00576 - Terminal 15 
            008 - Implausible Signal - Intermittent
00329 - Control Circuit for Unlocking Rear Lid 
            012 - Electrical Fault in Circuit - Intermittent
00901 - Back-Up Lamps 
            009 - Open or Short to Ground - Intermittent
01331 - Door Control Module; Driver Side (J386) 
            004 - No Signal/Communication - Intermittent
01332 - Door Control Module; Passenger Side (J387) 
            004 - No Signal/Communication - Intermittent
01333 - Door Control Module; Rear Left (J388) 
            004 - No Signal/Communication - Intermittent
01334 - Door Control Module; Rear Right (J389) 
            004 - No Signal/Communication - Intermittent
00931 - Locking Module for Central Locking; Rear Right (F223) 
            008 - Implausible Signal - Intermittent

-------------------------------------------------------------------------------
Address 68: Wiper Electr.        Labels: 7L0-955-119-V2.clb
   Part No: 7L0 955 119 K
   Component: Front Wiper         4027  
   Coding: 0000341
   Shop #: WSC 31414 000 376832
   VCID: 3C77CEF27C537FC1727-515E

   Subsystem 2 - Part No: 1K0 955 559 T  Labels: 1K0-955-559-AF.CLB
   Component: RegenLichtSens 011  1110  
   Coding: 00208933
   Shop #: WSC 31414  

No fault code found.

-------------------------------------------------------------------------------
Address 69: Trailer        Labels: 7L0-907-383-1D2.lbl
   Part No SW: 7L0 907 383 N    HW: 7L0 907 383 N
   Component: J345  Anhaenger     0080  
   Revision: 4A009001    Serial number: 00000193524428
   Coding: 0016385
   Shop #: WSC 00000 000 00000
   VCID: 3F8DB9FE6D4564D9575-5140

1 Fault Found:
00526 - Brake Light Switch (F) 
            008 - Implausible Signal - Intermittent
             Freeze Frame:
                    Fault Status: 00101000
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 40
                    Time Indication: 0


-------------------------------------------------------------------------------
Address 6C: Back-up Cam.        Labels: 5N0-907-441.clb
   Part No SW: 7L6 907 441     HW: 7L6 907 441 
   Component: J772__Rearview      0051  
   Revision: 00H07000    Serial number:    PA8 J670048
   Coding: 0000101
   Shop #: WSC 25053 444 85538
   VCID: 72EB20CA6E97F9B168B-5140

4 Faults Found:
03006 - Back-up Camera System not calibrated 
            000 -  - 
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 118
                    Time Indication: 0

             Freeze Frame:
                        Invalid
                        Invalid
                        Invalid

03008 - Supply Voltage for Back-Up Camera 
            002 - Lower Limit Exceeded - Intermittent
             Freeze Frame:
                    Fault Status: 00100010
                    Fault Priority: 3
                    Fault Frequency: 62
                    Reset counter: 50
                    Time Indication: 0

             Freeze Frame:
                        Term 15 On
                        Reverse OFF
                    Count: 3

02203 - Audio / Video Input 1 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 4
                    Fault Frequency: 5
                    Reset counter: 10
                    Time Indication: 0

             Freeze Frame:
                        Term 15 On
                        Reverse OFF
                    Count: 3

02203 - Audio / Video Input 1 
            008 - Implausible Signal
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 4
                    Fault Frequency: 5
                    Reset counter: 10
                    Time Indication: 0

             Freeze Frame:
                        Term 15 On
                        Reverse OFF
                    Count: 3


-------------------------------------------------------------------------------
Address 6E: Ctrl Head Roof        Labels: 7L6-919-044.lbl
   Part No: 7L6 919 044 T
   Component: DACHDISPLAY         0539  
   Revision: 00900539    Serial number: 2009289.07    
   Shop #: WSC 31414 000 00000
   VCID: 489FA222388B2361E6F-515E

1 Fault Found:
01305 - Databus for Infotainment 
            014 - Defective - Intermittent

-------------------------------------------------------------------------------
Address 76: Park Assist        Labels: Redir Fail!
   Part No: 7L0 919 283 F
   Component: 0E Einparkhilfe     1107  
   Shop #: WSC 00000 000 00000
   VCID: 3979D7E673614AE9691-5140

1 Fault Found:
00431 - Rear Parking Aid Display (Y15) 
            004 - No Signal/Communication - Intermittent

End-------------------------(Elapsed Time: 07:54)--------------------------
 
Last edited by a moderator:
   #2  

roth

Verified VCDS User
Verified
Joined
Feb 13, 2015
Messages
259
Reaction score
196
Location
USA
VCDS Serial number
C?ID=242642
You mentioned, you did some work on the front end. I've seen the level sensors installed incorrectly many times. You might want to double check that. Maybe read relevamt MVBs and post it here.

BTW post between code tags to save space.

Andy
 
   #3  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
32,576
Reaction score
23,232
Location
USA
VCDS Serial number
HC100001
At which "Save" page are you getting an error? You're supposed to put actual measured heights as new values into Adaptation Channels 01 to 04, and then an 01 as the new value into channel 05. How far are you getting with this? What are the measured values you're putting into channels 01 - 04?

I agree with Andy. Let's see the measuring values. Easiest way is to run a map.
[Applications]
[Controller Channel Map]
Controller Address = 34
Login or security code: Leave blank
Function: Measuring blocks
Output: CSV file
[Go]

The best thing to do with the resulting file is to upload it to a Google spreadsheet and link it here, although you could paste it into the body of a message (using CODE tags please) as well.

-Uwe-
 
   #4  

N867LC

Verified VCDS User
Verified
Joined
Aug 26, 2014
Messages
15
Reaction score
4
Location
Texas
VCDS Serial number
C?ID=199170
Andy,
I know the level sensors are installed correctly. As I did them prior to the front end rebuild, I was able to calibrate the ride height system after the rebuild. It was after I started into a gremlin chasing exercise that I replaced the batteries and a few other modules in the rear of the vehicle and lost the ride calibration during this process. You can see I still need to set the steering angle sensor, just haven't got to that just yet.

Uwe,
I get the error on channel 05, where I am to change the setting to a "1" and save. All the values from channel 01 to 04 are input, tested, and saved before going to the next channel (in order). The vehicle goes into the calibration mode, and the values at the corners are FL-496, FR-496, RL-496, RR-498.

I will run the diagnostic above shortly and post here.

I apologize, but I don't recall how to input the data between the code tags...
 
   #5  

DrPeter

Ross-Tech Employee
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
1,470
Reaction score
2,803
Location
16.4905° S, 151.7375° W
Hello,

I get the error on channel 05, where I am to change the setting to a "1" and save. All the values from channel 01 to 04 are input, tested, and saved before going to the next channel (in order). The vehicle goes into the calibration mode, and the values at the corners are FL-496, FR-496, RL-496, RR-498.

- If you have entered the above values and the controller refuses or gives an error on the last adaptation, ch.05, this typically means one of the ride height values is just out of spec.

Based on the VIN number and the PR-code [1BK] the specified ride height values should be:

1BK:
Front = [497mm +/-3mm] - (494mm to 500mm)
Rear = [502mm +/- 3mm] - (499mm to 505mm)

Try to enter the values again, this time stay within 3mm of the of the specified ride height values and then see if adaptation ch.05 saves correctly.

Hope this helps,

drpeter
 
   #6  

N867LC

Verified VCDS User
Verified
Joined
Aug 26, 2014
Messages
15
Reaction score
4
Location
Texas
VCDS Serial number
C?ID=199170
   #7  

roth

Verified VCDS User
Verified
Joined
Feb 13, 2015
Messages
259
Reaction score
196
Location
USA
VCDS Serial number
C?ID=242642
Each time you try basic settings, turn the ignition off for 15 seconds. Peter means to enter values that are within the range. Front is OK but rear enter 500. Then you will repeat the adaptation again. One more thing, set both switches on the center console to AUTO.

BR, Andy
 
  • Like
Reactions: Uwe
   #8  

N867LC

Verified VCDS User
Verified
Joined
Aug 26, 2014
Messages
15
Reaction score
4
Location
Texas
VCDS Serial number
C?ID=199170
In this last process, I let VCDS sit on each channel a while, I saw that channel 01 (front left) would indicate a valid entry (new value and test), but then occasionally flash invalid (in green and very quickly) then back to valid. All other channels 02-04 do not do this. This makes me think a bad or marginal sensor.
 
   #9  

roth

Verified VCDS User
Verified
Joined
Feb 13, 2015
Messages
259
Reaction score
196
Location
USA
VCDS Serial number
C?ID=242642
In this last process, I let VCDS sit on each channel a while, I saw that channel 01 (front left) would indicate a valid entry (new value and test), but then occasionally flash invalid (in green and very quickly) then back to valid. All other channels 02-04 do not do this. This makes me think a bad or marginal sensor.

Possible, plug might be corroded, how about unplugging it / plugging it back a couple of times. Maybe spray some WD-40 to remove moisture?

Andy
 
   #10  

N867LC

Verified VCDS User
Verified
Joined
Aug 26, 2014
Messages
15
Reaction score
4
Location
Texas
VCDS Serial number
C?ID=199170
The system allowed me to calibrate it and accept the values added. 497 fronts and 500 rears. The only real change was that I put BOTH level switches on the console in AUTO.

The only thing different was the console switches both set to AUTO. I did nothing different in my procedures. So this may want to be noted in the wiki.

Thanks all!
 
   #11  

roth

Verified VCDS User
Verified
Joined
Feb 13, 2015
Messages
259
Reaction score
196
Location
USA
VCDS Serial number
C?ID=242642
Yeah, the da book saz put both of them on AUTO and you put 500 like Peter said. Glad U got it.:D Now drive it for a day or two and try to adopt again putting the real values in.

BR, Andy
 
   #12  

N867LC

Verified VCDS User
Verified
Joined
Aug 26, 2014
Messages
15
Reaction score
4
Location
Texas
VCDS Serial number
C?ID=199170
Crap! I didn't see that in the wiki. I really love this "little" truck but I swear, troubleshooting it is like a monkey getting serious with a football!
 
Top