How unlock gray icons

[Marc320]

Hello guys, how i can unlock icons in my VCDS.

Marc

VCDS Icones inaccessible | VAG-Technique.fr (vag-technique.fr)

VCDS Icones inaccessible | VAG-Technique.fr (vag-technique.fr)

 

[Uwe]

Pictures in those forum posts are not visible to people like me who are not logged into that forum.

-Uwe-

 

[Marc320]

Hello Guys, I try to active my grey icons in VCDS release 20.12.00 .
thanks for helping.
All the best
Marc

 

[Boki Ar]

Where did you buy the unit? If you have a "short" serial number, (it starts with HC), please post here or photo interface.

 

[Mike@Gendan]

I have a feeling I know where this is headed...

 

[Ashields]

Hello
I think as that is a UDS module for that module you will need a Hex-V2 or Hex-net. The Hex-USB-CAN which you have is too old.

If your interface is genuine you can trade it in here https://store.ross-tech.com/shop/rethex/ .

I hope this helps
Andrew

 

[langers2k]

I think as that is a UDS module for that module you will need a Hex-V2 or Hex-net. The Hex-USB-CAN which you have is too old.

If your interface is genuine you can trade it in here https://store.ross-tech.com/shop/rethex/

That ECU is probably in a MK6 Golf or similar so should be fine on a HEX-CAN USB.

I suspect the problem is their interface isn't genuine Guess we'll find out when Uwe pops by

 

[Ashields]

Ah right, I just saw UDS and wondered if it could be the problem but I did certainly suspect the other reason...
Andrew

 

[Uwe]

I try to active my grey icons

It looks like you are referring to buttons, not icons. Buttons are inactive if a module doesn't support that function, or if VCDS can't load data to support that function.

In the module you posted a screen-shot from, I expect you would have more active buttons if you were using a legitimate interface.

They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS

... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php#fr

Let us know if/when you get one and we'll adjust your forum status.

-Uwe-