HEX-NET IS FREEZING 15 SECOND. BUT, ONLY AT THIS PAGE. I CAN'T UNDERSTANT.
I'M USING THE ACCESS POINT MODE.
I'M USING THE ACCESS POINT MODE.
HI EVERYBODY! I'M NEW HEX-NET USER. NICE TO MEET YOU. HEX-NET IS FREEZING AT THIS PAGE. PLEASE HELP!
- Thread starter kemalkaya84
- Start date
- Joined
- Oct 27, 2014
- Messages
- 2,856
- Reaction score
- 2,719
- Location
- Arandjelovac, Serbia
- VCDS Serial number
- C?ID=57300
Did you select the desired operation from the drop-down menu?
- Joined
- Jun 26, 2014
- Messages
- 391
- Reaction score
- 345
- Location
- Netherlands
- VCDS Serial number
- C?ID=150535
You need a keyboard fix, CAPS LOCK is stuck (on forums this is called SHOUTING!) 
The screens gives you the latest Service information... if you don't want to reset it click Done, Go Back or choose one of the options available and click Perform SRI...
The screens gives you the latest Service information... if you don't want to reset it click Done, Go Back or choose one of the options available and click Perform SRI...
My problem isn't that.Did you select the desired operation from the drop-down menu?
Thank you...
Thank you so much. But, my problem isn't that. VCDS is freezing...You need a keyboard fix, CAPS LOCK is stuck (on forums this is called SHOUTING!)
The screens gives you the latest Service information... if you don't want to reset it click Done, Go Back or choose one of the options available and click Perform SRI...
- Joined
- Oct 27, 2014
- Messages
- 2,856
- Reaction score
- 2,719
- Location
- Arandjelovac, Serbia
- VCDS Serial number
- C?ID=57300
Based on the screenshot, this cannot be seen. No “hourglass” or anything to indicate program freezing?
I also don't see what's funny in my post (#2).
I also don't see what's funny in my post (#2).
I'm so sorry for laughing emoji. I can't exit the SRI Reset Window. New screenshot is here;
Last edited:
New screenshot is here; (I'm using the Access Point Mode.) I can't exit the SRI Reset Window.
Last edited:
Last edited:
- Joined
- Jun 10, 2014
- Messages
- 1,250
- Reaction score
- 849
- Location
- Poland
- VCDS Serial number
- C?ID=159607
many of my friend complain that HEX v2 is much slower with older car, not like old HEX CAN , my Hext Net many time "connection to cloud" ...always when i need them urgent
try other Windows , maybe RAM memory is not much ?
try other Windows , maybe RAM memory is not much ?
My PC is Windows 10. And, New.
- Joined
- Jun 10, 2014
- Messages
- 1,250
- Reaction score
- 849
- Location
- Poland
- VCDS Serial number
- C?ID=159607
not all clusters use this same chanells for Service reset, and this function not read them first, only do function run , even if not available
try via USB first
make sure yo ucan do that manually ,
then try utomatic function reset
try via USB first
make sure yo ucan do that manually ,
then try utomatic function reset
There is not a problem on the wired connection. Problem is on the wireless acces point mode.
Broadcom 802.11n Wireless SDIO Adapter
Maybe. I try it. Thank you so much for your support. Have a nice day.
I tried on new laptop computer. But, the problem continues. I think, this problem is general problem of VCDS. Please check it. You can fix the problem with a new VCDS Update.
Thank you so much for your support. Have a nice day.
Trying to reproduce this. HN2 with CB 0.4529 in AP mode. Dell XPS-13 (9380) running W10 Pro, fully up-to-date.
No joy. I can go into and out of SRI Reset all day long. No freezes.
However, the car in question does have a much newer instrument cluster that uses the UDS protocol, and I don't have anything pre-UDS like the OP.
-Uwe-
No joy. I can go into and out of SRI Reset all day long. No freezes.
However, the car in question does have a much newer instrument cluster that uses the UDS protocol, and I don't have anything pre-UDS like the OP.
-Uwe-