Skoda Rapid Spaceback cruise control retrofit

[Mihai Simon]

Hello everyone! I am Mihai, from Sibiu - RO.
I have a Skoda Rapid Spaceback 1.2 TSI, 66 kw, model year 2017. I want to instal and activate cruise control sistem. I have the switch lever code 6RA953521C, installed it, but I don't know if other wires need to be pulled at the electrical installation.
I also attach a complete scan with all the car modules.
Thank you in advance!

Removed.  Data from a clone/pirate copy of VCDS is not acceptable here.

 

[Uwe]

Getting help in this forum requires the use of a legitimate VCDS system.

They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS

... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php

Let us know if/when you get one and we'll adjust your forum status.

-Uwe-

 

[iichel]

Yes you do need to add a lot of wires from stalks to BCM and engine. And you need to code both your BCM and engine as well. Furthermore you need to be sure your BCM is 087 or higher.
I do it daily and it's about an hour and a half of work.

Edit, sorry didn't see you here in the HoS.