Developer mode Mib2

[szymek]

Cannot activate Dev menu of Audi A6 facelift
After 5F - Security tried 20103 security codes let me enter in adaptation menu. After that when try to change Developer mode in active I receive an error: “Request out of range:” I want to activate Green Menu.
Does anyone know how to do this ?

 

[rhinopower]

VCDS is not up to the job

Use VCP, select engineering mode, then you can do it

 

[szymek]

Thanks for answer

I spent 500£ on VCDS and a much cheaper interface like VCP activate Dev menu

 

[siLc]

Each diagnostic tool has its advantages and disadvantages...

 

[Bruce]

I spent 500£ on VCDS and a much cheaper interface like VCP activate Dev menu

It is unclear how VCP accomplishes such feats without violating VAG's Intellectual Property standards. It is also unclear why VAG, who is normally very aggressive against those who do things "outside the rules", has not done anything to stop VCP.

VCDS has the ability to do that which is permitted by diagnostic protocol. If it goes beyond diagnostic protocols, then do not expect VCDS to have the capability unless and until VAG grants permission to modify their code without threat of punitive actions.

 

[szymek]

I don't know either, but it's weird

 

[NEtech]

Copy this file to:
C:\Ross-Tech\VCDS\Labels\User
And try Security Access and use the shown.

 

[szymek]

Copy this file to:
C:\Ross-Tech\VCDS\Labels\User
And try Security Access and use the shown.

I'll do it and let you know ... Thanks

 

[AINils]

Cannot activate Dev menu of Audi A6 facelift
After 5F - Security tried 20103 security codes let me enter in adaptation menu. After that when try to change Developer mode in active I receive an error: “Request out of range:” I want to activate Green Menu.
Does anyone know how to do this ?

It`s also possible with VCDS, but in Facelift A6 this menu won`t give any benefits