VW Crafter / LT edc16cp34 doagnostic issue

   #1  

krisv

Verified VCDS User
Verified
Joined
Feb 7, 2018
Messages
11
Reaction score
4
Location
Poland
VCDS Serial number
C?ID=326234
Hi guys

I have a VW Crafter 2010 with an 2.5tdi cr engine.
The car Has following problems, IT can only accelerate till around 3k rpm.
IT Has something like a limb mode no power till the rpm will fall under 1k rpm.
There are no error msg stored on the ECU. Ive restored the values od the ECU to stock because there was some custom chip on it.

My problem is that im Unable to check for example values like
Current boost pressure
Specified boost pressure
Current air mass

And many other usefull values.

074 906 032 AT
R5 2.5L EDC 0C00SG 0646
VCDS Version: Release 20.4.2 (x64)
Data version: 20200730 DS317.0

Thanks in advance for any help.
 
   #2  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
4,010
Reaction score
3,989
Location
South Molton, UK
VCDS Serial number
C?ID=1423
It's really difficult to advise without seeing an Auto-Scan (even though there are no fault codes information on the configuration is helpful).
 
   #3  

krisv

Verified VCDS User
Verified
Joined
Feb 7, 2018
Messages
11
Reaction score
4
Location
Poland
VCDS Serial number
C?ID=326234
It's really difficult to advise without seeing an Auto-Scan (even though there are no fault codes information on the configuration is helpful).
Give me a few minutes.
 
Top