2016 T6 learning Remote key

   #1  

invernesspl

Verified VCDS User
Verified
Joined
Jul 2, 2018
Messages
83
Reaction score
17
Location
UK
VCDS Serial number
C?ID=345478
Hi,

I've found a few threads on re learning remote keys but I can't seem to get it to work on my 2016 T6.

The key was working fine, but I had to remove the battery and when I put it back in the remote didn't work.

If I go in to central elecs, then adaption. I have tried clearing current keys and then going to 01 which is to programme a new remote. Have pressed Enter / Save and then pressed the unlock button on remote (whilst key is in ignition?) but nothing happens.

What am I doing wrong? I've not done this before!

I'm not able to lock my van tonight until I work this out as the drivers manual lock is damaged!

Thanks.
 
   #3  

invernesspl

Verified VCDS User
Verified
Joined
Jul 2, 2018
Messages
83
Reaction score
17
Location
UK
VCDS Serial number
C?ID=345478
I've sorted it.

In case its useful to anyone else here's how.

Central elecs, adaptation, channel #1, enter "0" into New Value, Test, Save, press unlock on FOB for 1 sec, hazard lights flash once & its coded.
 
Top