2009 Jetta Sportwagen ABS Code Issues

   #1  

09Sportwagen

Pirate
Joined
May 19, 2020
Messages
3
Reaction score
0
Location
USA
VCDS Serial number
LP/SN
I had my car smogged back in November the next day the ECM died, the car would just turn itself off. Prior to this it had never had any issues.
I sent the ECM out for repair to two different places was advised that the processor was failing and it could not be repaired. I bought a replacement ECM off of EBAY and took the car to the dealership to have the unit flashed to my keys. The dealership advised that they were unable to flash my ECM to my car, and they told me that the ABS was under recall but they were unable to do anything about the ABS because they could not flash the ECM. I had the car towed home and ordered another ECM with the Immobilizer deleted. Now, the car runs and drives, except the SAFE mode light is on and the ABS light and alarm wont turn off, which had never been issue. I ran another scan with the new ECM and can see that ABS unit now it is not coded, and there are 4 fault codes.

I have a scan from the day before we took it to the dealership and the ABS module codes are present, and there were no fault codes. So I tried to recode the ABS with the original long code and I keep getting "error code 31: Request out of Range"

Any advise on how to fix this would be great.
 
Last edited:
   #3  

09Sportwagen

Pirate
Joined
May 19, 2020
Messages
3
Reaction score
0
Location
USA
VCDS Serial number
LP/SN
Here is a scan with new ECM with the immobilizer delete, and ABS fault codes

Code:
[b]Removed.  Data from a clone/pirate copy of VCDS is not acceptable here. [/b]
And here is the scan from before it went to the dealership, with the factory ECM and no ABS fault codes

Code:
[b]Removed.  Data from a clone/pirate copy of VCDS is not acceptable here. [/b]
I will try get the advance ID info later today
 
Last edited by a moderator:
   #4  

09Sportwagen

Pirate
Joined
May 19, 2020
Messages
3
Reaction score
0
Location
USA
VCDS Serial number
LP/SN
Here is the Advanced ID Data for the engine and the immobilizer
Code:
[b]Removed.  Data from a clone/pirate copy of VCDS is not acceptable here. [/b]
Code:
[b]Removed.  Data from a clone/pirate copy of VCDS is not acceptable here. [/b]

Thanks
 
Last edited by a moderator:
   #5  

Viking

Verified VCDS User
Verified
Joined
Nov 2, 2015
Messages
314
Reaction score
323
Location
UK
VCDS Serial number
C?ID=151455
You're well out of date with VCDS there. Why haven't you updated it?
 
   #8  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
30,369
Reaction score
21,668
Location
USA
VCDS Serial number
HC100001
   #9  

Turboneticspower

New Member
Joined
May 21, 2020
Messages
2
Reaction score
0
Location
Mexico
hola amigo yo tambien tengo ese mismo problema con un modulo de abs que esta en blanco y me hace falta el codigo para que este pueda funcionar, soy nuevo en esto y necesito ayuda. Que informacion te puedo proporcionar ?
 
   #10  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
30,369
Reaction score
21,668
Location
USA
VCDS Serial number
HC100001
This is an English language forum. Please post in English.

Also, this section of the forum is called the Hall of Shame for a reason. You will not get help in this section.

-Uwe-
 
Top