Golf 1J AGU basic settings Throttle body

   #1  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
Hi

I have some issues with the aligment of the throttle body and its idling 1200 rpm, i bought a new throttle body and installed it but I have the same problem . when i start the car it idles normal but after a while of driving Idle is 1200 rpm. when i try to do a throttle body aligment on channel 98 i only got a error even with the new throttle body.

fault codes before this autoscan :
00282 throttle position actuator (v60)
27-10 implausible signal-intermittent

01165 throttle body control module
11-00 control limit not reached
Code:
 VCDS-Mobile
Auto-Scan

Finished
VIN: IMMO-IDENTNR:2284

Chassis Type:1J or 9M
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
	 76

VIN: IMMO-IDENTNR:2284



-----------------------------------------------------------------
Address 01: Engine	Labels: 06A-906-018-AGU.lbl
	Part No SW: 06A 906 018 BB	
	Component: 1.8L R4/5VT MOTR HS D09
	Coding: 04000
	Shop #: WSC 00046 000
	VCID: 63893C8F912BB96F2DF0D8-4B3C

1 Fault Found:
01165 - Throttle Body Control Module (J338)
	11-00 - Control Limit Not Reached


-----------------------------------------------------------------
Address 03: ABS Brakes	Labels: 1J0-907-37x-ABS.lbl
	Part No SW: 1J0 907 379	
	Component: ABS/EDS 20 IE CAN 0001
	Coding: 13504
	Shop #: WSC 00046 000
	VCID: EE9FDDBBCAE98407325EA1-4B00

No fault codes found.
-----------------------------------------------------------------
Address 08: Auto HVAC	Labels: 3Bx-907-044.lbl
	Part No SW: 3B1 907 044 B	
	Component: CLIMATRONIC V 1.0.0
	Coding: 01000
	Shop #: WSC 31414 000
	VCID: 20037383C0BDE2777052FF-4B3C

1 Fault Found:
01274 - Air Flow Flap Positioning Motor (V71)
	35-00 - - 


-----------------------------------------------------------------
Address 15: Airbags	Labels: 1J0-909-60x-VW3.lbl
	Part No SW: 1J0 909 609	
	Component: A AIRBAG VW3 SG 0002
	Coding: 00065
	Shop #: WSC 00046 000
	VCID: EC9BD7B3FCF576171C2ABB-4B7A

1 Fault Found:
01280 - Airbag; Passenger Side; Disabled
	35-00 - - 


-----------------------------------------------------------------
Address 17: Instruments	Labels: 1J0-919-xxx-17.lbl
	Part No SW: 1J0 919 860 DX	
	Component: A4-KOMBIINSTR. VDO V61 
	Coding: 04142
	Shop #: WSC 40152 000
	VCID: 88538B23C84DBA37984247-5160

No fault codes found.
-----------------------------------------------------------------
Address 46: Central Conv.	Labels: 1J0-959-799.lbl
	Part No SW: 1J0 959 799 Q	
	Component: 4C Zentral-SG Komf. 0001
	Coding: 04097
	Shop #: WSC 00046 000
	VCID: 4CDBF7331CB51617FCEADB-4B1E

	Subsystem 1 - 	Part No SW: 1J1-959-801-C
	Component: 4C Türsteuerger. FS0001r

2 Faults Found:
00946 - Interior Light (W)
	28-10 - Short to Plus - Intermittent

00930 - Locking Module for Central Locking; Rear Left (F222)
	27-00 - Implausible Signal


End--(Elapsed Time: 06:10, VBatt start/end: 12.1/12.1 Vign: 0.0)-
 
Last edited by a moderator:
   #3  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
No, sits a little loose, as i should
 
   #5  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
Wiring check out for ability to carry load current to TV from controller?
 
   #6  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
Tried that without success, looks like it suddenly stucks in part throttle when i am looking at the measuring values. Where can i find a ecu pinout schedule for this engine? thanks
 
   #8  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
Wiring check done, and all of it is ok and according to spec. Measured all of them with my fluke instrument . The cars ecu is chipped with a, for me, unknown chip and I am starting to believe that the chip is the issue. It still, sometimes stucks in part throttle and I am unable to do a basic setting with Vcds. Any more ideas about this issue before i change the ecu?
 
   #9  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
Ahhhh FOD huh?

Can you adapt any similar TV just plugging it in with success and did you try defaulting ECU by re-code and battery Jesus yet?
 
   #10  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
i can try to find another TV just for testning. i still have the old TV. i can try that one once again. i dont know how to default the ecu by code. The battery connections are cleaned up very carefully. Please describe the process of defaulting ecu by code. thank you for the response
 
   #12  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
i will try this!!

Thank you
 
   #13  

Klesk

Verified VCDS User
Verified
Joined
Mar 7, 2020
Messages
9
Reaction score
1
Location
Sweden
VCDS Serial number
C?ID=395119
It did not help to code the ECU. Only thing left to do is to replace the ECU as it dis not seem to work propertly. Thank you all for your advice :thumbs:
 
Back
Top