2010 Polo ABS Off-Line

   #21  

iichel

Verified VCDS User
Verified
Joined
Aug 10, 2016
Messages
2,281
Reaction score
2,714
Location
Eindhoven, NB, NL
VCDS Serial number
C?ID=284912
Yes this is perfectly safe to do. One tip is to disconnect the battery before doing any major work to the electrical system. Simply undo the negative terminal of the battery.

I guess you measured the can connections as well and they were ok?
 
   #22  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Managed to plug the T38 connector into the additional second hand replacement ABS pump and controller unit purchased today (identical part number in every respect to the original btw). Plugged in VCDS and same problem with no communication :confused:

I checked the CAN-H and CAN-L pins of the T38 and measured 2.64V for pin 26 abd 2.40v for pin14. As I'm not achieving the 3.5V could this mean a problem with the CAN wiring?

I attach the latest scan below which was with the additional abs pump/controller, I obtained today,attached:

Code:
Wednesday,15,April,2020,19:57:08:01140
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.0.1 (x64)
Data version: 20200331 DS317.0
www.Ross-Tech.com


VIN: WVWZZZ6RZAU042526   License Plate: 


Chassis Type: 6R-VW25 (6N0)
Scan: 01 03 04 08 09 15 17 19 25 44 56

VIN: WVWZZZ6RZAU042526   Mileage: 137230km-85270miles

01-Engine -- Status: Malfunction 1010
03-ABS Brakes -- Status: Cannot be reached 1100
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: Malfunction 0010
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (CGP)       Labels: 03E-906-033-AZQ.lbl
   Part No SW: 03E 906 023 L    HW: 03E 906 023 L
   Component: SIMOS91 1.2l 4V     4489  
   Revision: --H04---    Serial number:               
   Coding: 0000071
   Shop #: WSC 31414 790 31414
   VCID: 285FF51798F76FC66A-5140

1 Fault Found:
18057 - Powertrain Data Bus 
            P1649 - 009 - Missing Message from ABS Controller
Readiness: 0000 0001

-------------------------------------------------------------------------------
Address 03: ABS Brakes
Cannot be reached

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels: 6R0-820-045-9AP.clb
   Part No SW: 6R0 820 045 H    HW: 6R0 820 045 H
   Component: Climatic       24 0660  
   Revision: 00 10 24    
   VCID: 3365127B92311C1ECF-8066

2 Faults Found:
01316 - ABS Control Module 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 196
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2014.08.27
                    Time: 01:29:17

01314 - Engine Control Module 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 244
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2014.09.04
                    Time: 16:53:21


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 6R0-937-08x-09.clb
   Part No SW: 6R0 937 085 B    HW: 6R0 937 085 B
   Component: BCM PQ25 M+   H46 0207  
   Revision: BB046001    Serial number: 0143 047100238
   Coding: 64B02BBF08A10048002000003D2B0C900040410F60060000200000000000
   Shop #: WSC 31414 790 31414
   VCID: 3A7B3F5FB55BED560C-806E

   Subsystem 1 - Part No SW: 6R0 959 802 R    HW: 6R0 959 802 R  Labels: 6R0-959-802.CLB
   Component: J386__TSG_FT  006 0903 
   Serial number: KU0-KU008.01.1013907
   Coding: 18BC30

   Subsystem 2 - Part No SW: 6R0 959 801 T    HW: 6R0 959 801 T  Labels: 6R0-959-801.CLB
   Component: J387__TSG_BT  006 0902 
   Serial number: KU0-KU021.01.1010764
   Coding: 08BC30

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 6R0 959 655 C    HW: 6R0 959 655 C
   Component: VW10Airbag00B H09 0018  
   Revision: --------    Serial number: 003DW00CBGDE
   Coding: 003042
   Shop #: WSC 31414 790 31414
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 428B47BFD58BA59654-8016

   Crash sensor for side airbag: driver side: 
   Serial number: 3572SRB40000AC149925

   Crash sensor for side airbag: front passenger side: 
   Serial number: 3582SRB40000AC1919AB

   Crash sensor for side airbag: rear: driver side: 
   Serial number: 3516GRB402LCT8IUPRI5

   Crash sensor for side airbag: rear: passenger side: 
   Serial number: 3526GRB40279MGGL6SI4

1 Fault Found:
12656896 - Databus 
          U1122 00 [009] - Implausible Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 196
                    Mileage: 137231 km
                    Date: 2020.04.05
                    Time: 01:29:56


-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 6R0 920 960 C    HW: 6R0 920 960 C
   Component: KOMBI         H03 0207  
   Serial number: 00000000000000
   Coding: 440200
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04052
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
   VCID: 35612C639445022EE1-8060

2 Faults Found:
12648448 - Function Restricted due to Missing Message(s) 
          U1111 00 [008] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 244
                    Mileage: 137231 km
                    Date: 2020.04.13
                    Time: 16:53:20

12656896 - Function Restricted due to Missing Message(s) 
          U1111 00 [009] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 196
                    Mileage: 137231 km
                    Date: 2020.04.05
                    Time: 01:28:08


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 6R0 937 085 B
   Component: GW-K-CAN TP20 0207  
   Coding: 002300
   Shop #: WSC 31414 790 31414
   VCID: 70EFDD77A3A76706F2-8024

2 Faults Found:
01314 - Engine Control Module 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 244
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2014.09.04
                    Time: 16:53:20

01316 - ABS Control Module 
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 196
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2014.08.27
                    Time: 01:30:04


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H03 0207  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03006
   ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
   VCID: 6ADBCF1F8D7B9DD6BC-803E

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156 B
   Component: LenkhilfeTRW        V277  
   Coding: 11250
   Shop #: WSC 31414  
   VCID: 2F6D1E0BEA1938FEAB-807A

2 Faults Found:
01314 - Engine Control Module 
            49-10 - No Communications - Intermittent
01317 - Control Module in Instrument Cluster (J285) 
            79-00 - Please Check Fault Codes

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels:. 5M0-035-1xx-56.clb
   Part No SW: 5M0 035 156 B    HW: 5M0 035 156 B
   Component: Radio         510 0521  
   Revision: R0510002    Serial number: VWZ5Z1K0260340
   Coding: 0000020002
   Shop #: WSC 00000 000 31414
   VCID: 285FF5175BF76FC66A-807C

No fault code found.

End-------------------------(Elapsed Time: 02:25)--------------------------
 
   #23  

iichel

Verified VCDS User
Verified
Joined
Aug 10, 2016
Messages
2,281
Reaction score
2,714
Location
Eindhoven, NB, NL
VCDS Serial number
C?ID=284912
Do you have any idea why there was an intermittent communication problem with the engine?
 
   #24  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Do you have any idea why there was an intermittent communication problem with the engine?

I unplugged the ecu in order to facilitate access to the abs connector
 
   #25  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Do you have any idea why there was an intermittent communication problem with the engine?

I unplugged the ecu in order to facilitate access to the abs connector. When I performed the scan, the ecu was reconnected and I started the engine.

When I checked the CAN pins T38/26 and T38/14, the engine was running and under load as I switched on the headlights, rear heated window and a/c.
 
   #26  

Pinpointdiag

Verified VCDS User
Verified
Joined
Jun 1, 2015
Messages
65
Reaction score
42
Location
Scotland
VCDS Serial number
C?ID=90374
Can I suggest load testing both battery feeds and 1x ignition feed and both negatives. at the plug.
As previously you have said you have checked with a multi meter, which is good and you’ve replaced fuses. Also good. But what if I wire is corroded it my show the correct voltage but not carry enough current. Same as a fuse fault.
A headlight bulb made up with a couple of wires would be a reasonable load tester.
Test all positive and negatives with this at the abs plug with it disconnected.

Also a multi meter voltage test will show an average voltage of a switching signal. So the CAN low will probably be a lower average voltage than the CAN high. Which looks like what your getting. If that’s also at the abs plug with the plug disconnected then there probably a signal getting to the module. But there’s a bit more to testing the CAN than that but only if you have to. You should confirm the other wiring first.
 
   #27  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
I am going to give this a try, to check the load / current.

Another thing I'm going to try is to split open the abs module to check for any dry joints on the pcb.
 
   #28  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Checked the fuses to the abs module again. The SC4 fuse indicated a potential problem with the wire. Potentially a break. Ran another cable with a 1 amp fuse direct to the abs module connector. It was the red and blue wire. Did a scan and managed to have communication with abs controller again! Now, for the next stage to code the abs module and calibrate the steering angle sensor. Next job will be to check the wiring harness. I think the break in this and potentially other wires is going to be below the battery holder as there was historic evidence of corrosion there due to a past battery leak before we owned the car. Thank you all for your help. By the way splitting open of this abs controller is not a good idea. I tried doing this with a Dremel on a spare broken unit and it was not fruitful. The plastic cover is bonded to the metal case.
 
   #29  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
hope someone can help out. I am trying to code the new abs module using my code saved from an auto scan. it is saying: Coding rejected, Error 22: Conditions not correct or request sequence error.

I am using:
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AJ HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 230224E3216D00B2C42624E684D100801100
 
   #30  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
latest scan:
Code:
Monday,17,August,2020,11:51:52:01140
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.2.0 (x64)
Data version: 20200730 DS317.0
www.Ross-Tech.com


VIN: WVWZZZ6RZAU042526   License Plate: FV10ZVH
Mileage: 137260km-85289mi   Repair Order: 20200817b


Chassis Type: 6R-VW25 (6N0)
Scan: 01 03 04 08 09 15 17 19 25 44 56

VIN: WVWZZZ6RZAU042526   Mileage: 137260km-85289miles

01-Engine -- Status: Malfunction 0010
03-ABS Brakes -- Status: Malfunction 1010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine (CGP)       Labels: 03E-906-033-AZQ.lbl
   Part No SW: 03E 906 023 L    HW: 03E 906 023 L
   Component: SIMOS91 1.2l 4V     4489  
   Revision: --H04---    Serial number:               
   Coding: 0000071
   Shop #: WSC 31414 790 31414
   VCID: 285FF51798F76FC67B-5140

1 Fault Found:
18057 - Powertrain Data Bus 
            P1649 - 009 - Missing Message from ABS Controller - Intermittent
Readiness: 0010 0001

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels:. 6R0-907-37x-ESP82.clb
   Part No SW: 6R0 907 379 AJ    HW: 6R0 907 379 AF
   Component: ESP8.2i front H05 0001  
   Revision: --------    
   Coding: 000000000000000000000000000000000000
   Shop #: WSC 00788 648 00255
   VCID: 06039BAFB52359B629-8052

5 Faults Found:
01042 - Control Module; Not Coded 
            000 - -
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 0
                    Fault Frequency: 21
                    Reset counter: 79
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 14:58:14

             Freeze Frame:
                    Hex Value: 0x0007
                    Hex Value: 0x0002
                    Hex Value: 0x3213
                    Hex Value: 0x148F
                    Hex Value: 0x00FF
                    Hex Value: 0x7F7F
                    Hex Value: 0x7F00

00778 - Steering Angle Sensor (G85) 
            005 - No or Incorrect Basic Setting / Adaptation
             Freeze Frame:
                    Fault Status: 01100101
                    Fault Priority: 0
                    Fault Frequency: 21
                    Reset counter: 79
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 14:58:14

             Freeze Frame:
                    Hex Value: 0x0007
                    Hex Value: 0x0002
                    Hex Value: 0x3251
                    Hex Value: 0x1B8F
                    Hex Value: 0x00FF
                    Hex Value: 0x7F7F
                    Hex Value: 0x7F00

00493 - ESP-Sensor Unit (G419) 
            005 - No or Incorrect Basic Setting / Adaptation
             Freeze Frame:
                    Fault Status: 01100101
                    Fault Priority: 0
                    Fault Frequency: 20
                    Reset counter: 79
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 14:58:14

             Freeze Frame:
                    Hex Value: 0x0007
                    Hex Value: 0x0002
                    Hex Value: 0x32E1
                    Hex Value: 0x208F
                    Hex Value: 0x00FF
                    Hex Value: 0x7F7F
                    Hex Value: 0x7F00

01314 - Engine Control Module 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 0
                    Fault Frequency: 1
                    Reset counter: 114
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 15:05:11

             Freeze Frame:
                    Hex Value: 0x0007
                    Hex Value: 0x0002
                    Hex Value: 0x33A0
                    Hex Value: 0x139B
                    Hex Value: 0x00FF
                    Hex Value: 0x7F7F
                    Hex Value: 0x7F00

03306 - Coding Not Valid 
            000 - - - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 0
                    Fault Frequency: 2
                    Reset counter: 119
                    Mileage: 137261 km
                    Time Indication: 0
                    Date: 2015.01.08
                    Time: 11:41:01

             Freeze Frame:
                    Hex Value: 0x0003
                    Hex Value: 0x0002
                    Hex Value: 0x32E7
                    Hex Value: 0x25B1
                    Hex Value: 0x00FF
                    Hex Value: 0x7F7F
                    Hex Value: 0x7C00


-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301)       Labels: 6R0-820-045-9AP.clb
   Part No SW: 6R0 820 045 H    HW: 6R0 820 045 H
   Component: Climatic       24 0660  
   Revision: 00 10 24    
   VCID: 3365127B92311C1EDE-8066

1 Fault Found:
01316 - ABS Control Module 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 6
                    Fault Frequency: 3
                    Reset counter: 114
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 15:01:45


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 6R0-937-08x-09.clb
   Part No SW: 6R0 937 085 B    HW: 6R0 937 085 B
   Component: BCM PQ25 M+   H46 0207  
   Revision: BB046001    Serial number: 0143 047100238
   Coding: 64B02BBF08A10048002000003D2B0C900040410F60060000200000000000
   Shop #: WSC 31414 790 31414
   VCID: 3A7B3F5FB55BED561D-806E

   Subsystem 1 - Part No SW: 6R0 959 802 R    HW: 6R0 959 802 R  Labels: 6R0-959-802.CLB
   Component: J386__TSG_FT  006 0903 
   Serial number: KU0-KU008.01.1013907
   Coding: 18BC30

   Subsystem 2 - Part No SW: 6R0 959 801 T    HW: 6R0 959 801 T  Labels: 6R0-959-801.CLB
   Component: J387__TSG_BT  006 0902 
   Serial number: KU0-KU021.01.1010764
   Coding: 08BC30

1 Fault Found:
00538 - Reference Voltage 
            011 - Open Circuit - Intermittent
             Freeze Frame:
                    Fault Status: 00101011
                    Fault Priority: 3
                    Fault Frequency: 19
                    Reset counter: 114
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 14:22:20


-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 6R0 959 655 C    HW: 6R0 959 655 C
   Component: VW10Airbag00B H09 0018  
   Revision: --------    Serial number: 003DW00CBGDE
   Coding: 003042
   Shop #: WSC 31414 790 31414
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 428B47BFD58BA59645-8016

   Crash sensor for side airbag: driver side: 
   Serial number: 3572SRB40000AC149925

   Crash sensor for side airbag: front passenger side: 
   Serial number: 3582SRB40000AC1919AB

   Crash sensor for side airbag: rear: driver side: 
   Serial number: 3516GRB402LCT8IUPRI5

   Crash sensor for side airbag: rear: passenger side: 
   Serial number: 3526GRB40279MGGL6SI4

1 Fault Found:
12656896 - Databus 
          U1122 00 [008] - Implausible Message
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 3
                    Reset counter: 114
                    Mileage: 137231 km
                    Date: 2020.08.13
                    Time: 15:01:45


-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 6R0 920 960 C    HW: 6R0 920 960 C
   Component: KOMBI         H03 0207  
   Serial number: 00000000000000
   Coding: 440200
   Shop #: WSC 31414 790 50316
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04052
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW25.rod
   VCID: 35612C639445022EF0-8060

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 6N0-909-901-6R.clb
   Part No SW: 6N0 909 901     HW: 6R0 937 085 B
   Component: GW-K-CAN TP20 0207  
   Coding: 002300
   Shop #: WSC 31414 790 31414
   VCID: 70EFDD77A3A76706E3-8024

1 Fault Found:
01316 - ABS Control Module 
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 3
                    Reset counter: 114
                    Mileage: 137231 km
                    Time Indication: 0
                    Date: 2015.01.04
                    Time: 15:01:45


-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H03 0207  
   Serial number:               
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03006
   ROD: EV_Immo_UDS_VDD_RM09_VW21.rod
   VCID: 6ADBCF1F8D7B9DD6AD-803E

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156 B
   Component: LenkhilfeTRW        V277  
   Coding: 11250
   Shop #: WSC 31414  
   VCID: 2F6D1E0BEA1938FEBA-807A

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio (J503)       Labels:. 5M0-035-1xx-56.clb
   Part No SW: 5M0 035 156 B    HW: 5M0 035 156 B
   Component: Radio         510 0521  
   Revision: R0510002    Serial number: VWZ5Z1K0260340
   Coding: 0000020002
   Shop #: WSC 00000 000 31414
   VCID: 285FF5175BF76FC67B-807C

No fault code found.

End-------------------------(Elapsed Time: 02:14)--------------------------
 
   #31  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
4,451
Reaction score
4,441
Location
South Molton, UK
VCDS Serial number
C?ID=1423
hope someone can help out. I am trying to code the new abs module using my code saved from an auto scan. it is saying: Coding rejected, Error 22: Conditions not correct or request sequence error.

I am using:
Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP82.clb
Part No SW: 6R0 907 379 AJ HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
Revision: --------
Coding: 230224E3216D00B2C42624E684D100801100
Have you fitted exactly the same replacement ABS module (same HW & SW part numbers)?
 
   #32  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
As far as I know, I have. The scan also indicates the same part ID too.
 
   #33  

Dana

Administrator
Staff member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
4,472
Reaction score
6,586
Location
Western PA, USA
As far as I can tell the identical 6R0 907 379 AJ module was installed so it should have accepted the factory coding string. Please make sure:

1) Battery voltage isn't low resulting in the error. You might try both with the engine running and/or with the ignition on (engine off) but with a battery charger connected.
2) The new coding you are entering is the same length. If you drop a digit or pick up a space at the end the controller will reject it.

After we eliminate those as possible causes I support it couldn't hurt to test some SA codes. I would make sure 40168 is accepted and you might even try 40304 as well since both are confirmed valid codes for this module type. Assuming those are accepted but don't get you any further in regards to coding I might try: 09892

Feedback would be highly appreciated in regards to 09892 (even if it isn't accepted).
 
  • Like
Reactions: Uwe
   #34  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
I had engine on and running on idle.
The battery is a new and uprated varta silver so it is unlikely to be low voltage or current (but I do have a CTEK MX 5.0 so can connect that and try again)
I checked the length of the code that I cut and paste into coding by also cutting and pasting it to the scan file as a check and the string length matched.

I would like to try your suggestion of SA codes but what is the procedure?

I've seen the video about 40 168 but that was to be done after successful coding of the abs module. Please could you send further guidance?
 
   #35  

Dana

Administrator
Staff member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
4,472
Reaction score
6,586
Location
Western PA, USA
Thanks Andrew,

I sent you an email primarily to verify that SA codes 40168, 40304 and 09892 were all accepted and didn't directly help with coding. Time permitting, please do make sure that connecting to 03-ABS, clicking Security Access - 16, entering each of the above codes (one at a time) followed by Do it doesn't result in any error messages. Make sure to try coding after any that are accepted to see if that changes the Error 22: Conditions not correct or request sequence error results.

At that point we may have success with a special 6R0-907-37x-ESP82.clb label file that will allow you to test a combination of SA code and diagnostic mode changes but I want to make sure the module doesn't have lock time and that we don't overlook anything simple.
 
   #36  

iichel

Verified VCDS User
Verified
Joined
Aug 10, 2016
Messages
2,281
Reaction score
2,714
Location
Eindhoven, NB, NL
VCDS Serial number
C?ID=284912
Your coding looks correct to me. You should not need SA to do coding of the module.

EDIT:
Looks like the VIN does not match.
Try this coding please
230224E3217100B4C42A24E484D700801500
 
   #37  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Thank you so much. This coding worked!
 
   #38  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Thank you so much. This coding worked! All warning errors associated with abs are now cleared.
 
   #39  

iichel

Verified VCDS User
Verified
Joined
Aug 10, 2016
Messages
2,281
Reaction score
2,714
Location
Eindhoven, NB, NL
VCDS Serial number
C?ID=284912
Good job. Don't forget to do basic settings and steering angle calibration.
 
   #40  

anar288

Verified VCDS User
Verified
Joined
Mar 21, 2020
Messages
26
Reaction score
9
Location
UK
VCDS Serial number
C?ID=212110
Good job. Don't forget to do basic settings and steering angle calibration.

All done! Please could you explain the logic of the abs coding and how you managed to derive the correct string?
 
Last edited:
Top