HEX-USB+CAN firmware update failed

   #1  

morskoi

Pirate
Joined
Jan 25, 2015
Messages
1
Reaction score
0
Location
Russia
VCDS Serial number
HC558896 (CLONE!)
Hello, I'm trying to use VCDS 14.10.0 with HEX-USB+CAN adapter. When I press "test" i see this message
---------------------------
VCDS: Port Test
---------------------------
Port Status: OK
USB Library Version: 03.02.07
USB Driver Version: 02.10.00
Interface: Found!
Type: Ross-Tech HEX-USB+CAN
Version: 1.92
Status: Firmware Update Required!
CAN: Questionable
---------------------------
ОК
---------------------------

I click OK and I see next message

The Firmware in your HEX interface is out of date!
Current HEX Firmware version: 1.92
This version of VCDS requires: 1.93

I click UPDATE, and I see
Previous version: 1.92
Please Wait...
Unable to Update!
 
   #2  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
29,955
Reaction score
21,394
Location
USA
VCDS Serial number
HC100001
You are using an illegally pirated clone of our product. You should return it to whomever you bought it from and demand a full refund. If no refund is forthcoming, you should take the matter up with your payment processor and/or law enforcement authorities.

Real ones are available directly from us:
http://store.ross-tech.com/shop/cat/IC.html

... or from any of our authorized resellers:
http://www.ross-tech.com/distributors.html

-Uwe-
 
   #3  

Dana

Administrator
Staff member
Joined
Jan 29, 2014
Messages
4,275
Reaction score
6,252
Location
United States
Top