- Jan 29, 2014
- Reaction score
- VCDS Serial number
Where I can find this T7/T17 terminals?If I understand, this plug above J533 Can Gateway pins is here to avoid multi soldering on T7/T17 which are already used for ACC and lane assist. I'm talking about the plug just at the right of "CANBUS" writted on diagram.
Am I right?
I think there's a mistake on the diagram. J533 has a T20 connector, not a T27...?
You do not need to go to the fuse box. You have only to find + for assitants (ACC, A5 camera...) which is above the driver's footwell. You'll find a convinience point where you can scratch cables and solder + cable for rear side assist controllers. It comes from T17h/15 ( a green/black cable). If you do it like this, you'll have it installed as per factory.Thanks for the reply!
yes . i have the elsa wiring but i have isssue. i have not now to show full scan because i dont save it . i make coding to all ecuHave you wire them correct way around? Slave at driver side and master at passenger side?