Hello from Indian Ocean // Golf MK7 with ESCP OFF ba developer adaptation need HELP :

   #1  

YanCT

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Location
Reunion Island
Hello guys,



Thanks for welcoming me here.



I decided to join because I'm getting issues with my ESC on a MK7 2013 TDI.



Of course I will give my help to other member when I'll be able to.



For the curious : Will post photos later



My car is a basic 1.6TDI 105hp totally tuned :D



Kufatec Sound Booster in the engine-bay + Kufatec Mini Sound at exhaust exit

Produced in end-2012 - Bought in may 2013 - Today mileage is 133 000kms (82 642 miles)

Stage 3 - DPF OFF - EGR OFF - Big Turbo (the one from the GTD) -

BMC carbon intake -

R-line Body - Full Led double U headlights -- Full rear led lights





Oil is Castrol 5w40 (as I have removed DPF) and oil is changed every 15 000kms (9320 miles)

Still on original clutch



Power is : 196hp (145 kw)

Torque is around 403nm on bench test

Average consumption is between 4.3 L /100kms (47mpg) and up to 7 L/100kms (33mpg)when driving hard and/or in moutains.



My age is 23

My location is Reunion Island in Indian Ocean

We are a full part of Europe

We are a French department (97)
 
   #2  

YanCT

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Location
Reunion Island
Hello guys,

I’m attempting to re-activate ESC on my 2013 (end 2012) MK7 GOLF TDI.
The only fault code I have is « C10C800 Fonction deactivated by adaptation » and the car writes me "ESC OFF" each time I put ignition ON.
Also, the ESC setting won't show up anymore in the car setting on the onboard screen :(

Please note i do not have the byte 29 on my ABS module as it has been manufactured in end-2012, so my malfunction is not coming from a wrong long-coding.

I use an official ROSS TECH CABLE (HEX NET V2 /3VINs)

History :

A myself-mistake has lead to get my ABS MODULE completely reseted early this year. (long coding 000000....)
I had a look in my ROSS TECH folder on my computer and hopefuly found a complete scan of my car from 2017.
Then I paste the old long coding and the coding has been accepted by the ABS module (I paid attention to re-use the good workshop number etc…).

I then made the basic settings for the various sensors (longitudnal acceleration, vertical, the wheel sensor etc, the brake pedal, etc, of course following different forums and the superb Ross-Tech WiKi :D
I’ve deleted the fault codes.
All went perfectly and the ABS is back, tire pressure monitoring works well, corner light are back again…

BUT…. IT REMAINS THE FAULT CODE BELOW, and it's the only fault on the car (will post the complete scan just at the end).

Many writes are in French as I'm French but I'll do any translation you'll need. I apologize for my relative english :D

Code:
--------------------------------------------------------------------------------------
Adresse 03: Freins ABS (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   No. pièce Log: 5Q0 907 379 AC    Mat: 5Q0 907 379 D
   Pièce: ESC           H75 0437  
   Révision: 00000000    No. de série:               
   Codage: 01FA62A120220A710378060901C42580460450C06080A4F300480024C0
   No. Atelier: WSC 01357 011 00200
   Jeu de données ASAM: EV_Brake1UDSContiMK100IPB 008020
   ROD: EV_Brake1UDSContiMK100IPB_008_VW37.rod
   VCID: 7DA707231D7B69DFA1F-8028

1 Code défaut trouvé:
0394 - Arrêt de fonction active 
          C10C8 00 [137] - -
          [The function AYC+TCS or EDS were deactivated by adaption]
          Témoin allumé - Confirmé - Testé depuis RàZ mémoire
             Capture:
                    Etat du défaut: 00000001
                    Priorité du défaut: 2
                    Fréquence du défaut: 1
                    Compteur de RAZ: 39
                    Kilométrage: 133192 km
                    Date: 2019.11.14
                    Temps: 17:57:59
-------------------------------------------------------------------------------------
ALSO, I can notice by reading advanced identification, there is no VIN registered in my BRAKES MODULE. Is it normal ? How to code it correctly ?


After days and days of investigation, I'm pretty sure to have found the good adaptation channels to modify (2 channels) :

- ABS BRAKES MODULE 03 --> Developer_Function_101 "Anti-Slip Regulation (ASR)" is set on NOT ACTIVATED and there is possibility to change it to ACTIVATED
- ABS BRAKES MODULE 03 --> Developer_Function_102 "ASR and ESP function deactivation" is set on ASR FUNCTION DEACTIVATION and there is possibility to change it to ACTIVATED or ASR AND ESP function deactivation.


SO... We can guess my problem is that the ASR is deactivated.... Well... that's a good thing to kno (and it relates good with the fault code "The function AYC+TCS or EDS were deactivated by adaption"

BUT, my major problem is how to change it ... VCDS don't let me change as it request a security code and no one works ! I've tried 40168 and 201003 and many others...
is there a special code for DEVELOPER ADAPTATIONS ?

Please note I already all the other adaptation channel and basic setting and all seem good.


Your help would be really apreciated as I am driving without ESC from months and months... :(



HERE IS MY FULL SCAN :

Code:
Samedi,16,Novembre,2019,00:48:56:41075
VCDS -- Logiciel d'émulation de VAG/VAS sous Windows 10 x64
Version VCDS: FRM 19.6.1.0  HEX-V2 CB: 0.4508.4
Version données: 20190529 DS308.0
[url]www.rosstech.fr[/url]


VIN: WVWZZZAUZDW025191   Plaque d'immat.: 


Type chassis: AU-VW37 (5Q0)
Scanner: 01 03 08 09 15 16 17 19 42 44 52

VIN: WVWZZZAUZDW025191   Kilométrage: 133 209 kms

01-Moteur -- Etat: OK 0000
03-Freins ABS -- Etat: Défaut 0010
08-Climatronic -- Etat: OK 0000
09-Centrale Elec. -- Etat: OK 0000
15-Airbags -- Etat: OK 0000
16-Volant multifonct. -- Etat: OK 0000
17-Instruments -- Etat: OK 0000
19-Gateway CAN -- Etat: OK 0000
42-Porte conducteur -- Etat: OK 0000
44-Direction assistée -- Etat: OK 0000
52-Porte passager -- Etat: OK 0000
-------------------------------------------------------------------------------
Adresse 01: Moteur (J623-CLHA)       Labels:. 04L-907-309-V1.clb
   No. pièce Log: 04L 906 021 M    Mat: 04L 907 309 B
   Pièce: R4 1,6L EDC   X21 4944  
   Révision: 84X21---    
   Codage: 01110012032415092000
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_ECM16TDI01104L906021M 002007
   ROD: EV_ECM16TDI01104L906021P.rod
   VCID: 2F3BED6B87974B4F633-807A

Aucun code défaut trouvé.
Tests passés: 0 0 0 0 X 

-------------------------------------------------------------------------------
Adresse 03: Freins ABS (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   No. pièce Log: 5Q0 907 379 AC    Mat: 5Q0 907 379 D
   Pièce: ESC           H75 0437  
   Révision: 00000000    No. de série:               
   Codage: 01FA62A120220A710378060901C42580460450C06080A4F300480024C0
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_Brake1UDSContiMK100IPB 008020
   ROD: EV_Brake1UDSContiMK100IPB_008_VW37.rod
   VCID: 7DA707231D7B69DFA1F-8028

1 Code défaut trouvé:
0394 - Arrêt de fonction active 
          C10C8 00 [137] - -
          [The function AYC+TCS or EDS were deactivated by adaption]
          Témoin allumé - Confirmé - Testé depuis RàZ mémoire
             Capture:
                    Etat du défaut: 00000001
                    Priorité du défaut: 2
                    Fréquence du défaut: 1
                    Compteur de RAZ: 39
                    Kilométrage: 133192 km
                    Date: 2019.11.14
                    Temps: 17:57:59


-------------------------------------------------------------------------------
Adresse 08: Climatronic (J301)       Labels:. 5G0-907-426.clb
   No. pièce Log: 5G0 907 426 J    Mat: 5G0 907 426 J
   Pièce: AC Manuell    H01 0503  
   Révision: 00001K06    
   Codage: 00020104302100001000000000000000
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_ACManueBHBVW37X 002017
   ROD: EV_ACManueBHBVW37X_002_VW37.rod
   VCID: 323DE41F94A566A70CD-8066

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 09: Centrale Elec. (J519)       Labels:| 5Q0-937-08X-BV1.clb
   No. pièce Log: 5Q0 937 084 M    Mat: 5Q0 937 084 M
   Pièce: BCM MQBAB B   H14 0106  
   No. de série: 00011228900502
   Codage: 00000842C20100534F644000000403081000000000000000000000000000
   No. Atelier: WSC 01357 011 00200
   Jeu de données ASAM: EV_BCMCONTI 010001
   ROD: EV_BCMBOSCH_010.rod
   VCID: 42DDB4DF2405D6273E1-8016

   Appareil de commande de moteur d'essuie-glace: 
   Sous-système 1 - No. pièce Log: 5G1 955 119 A    Mat: 5G1 955 119 A  Labels: 5QX-955-119-V1.CLB
   Pièce: WWS    121003  042 0551 
   No. de série:         121012180544
   Codage: 0E4DD5

Aucun code défaut trouvé.


-------------------------------------------------------------------------------
Adresse 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   No. pièce Log: 5Q0 959 655 M    Mat: 5Q0 959 655 M
   Pièce: AirbagVW20    011 0361  
   No. de série: 003M1R00GA5+
   Codage: 98CCC000000000005C0000CF004800000065
   No. Atelier: WSC 01357 011 00200
   Jeu de données ASAM: EV_AirbaVW20SMEVW37X 002126
   ROD: EV_AirbaVW20SMEVW37X_VW37.rod
   VCID: 4ACD9CFF1C350E67F61-801E

   Rétracteur de ceinture G: 

   Rétracteur de ceinture D: 

   Capteur de collision du sac gonflable latéral: côté conducteur: 
   Sous-système 3 - No. pièce Log: -----------    Mat: 480 002 510 12
   Pièce: SideSensor_Df  001 0887 
   No. de série: 35767000000211A40C0F
   Codage: 2D2D2D

   Capteur de collision de sac gonflable latéral: côté passager: 
   Sous-système 4 - No. pièce Log: -----------    Mat: 480 002 510 12
   Pièce: SideSensor_Pf  001 0887 
   No. de série: 3586700000098C940C0/
   Codage: 2D2D2D

   Capteur de collision du sac gonflable latéral AR: côté cond.: 
   Sous-système 5 - No. pièce Log: -----------    Mat: 480 402 410 12
   Pièce: SideSensor_Dr  001 6149 
   No. de série: 3516502C50D0E475F15H
   Codage: 2D2D2D

   Capteur de collision du sac gonflable latéral AR: côté pass.: 
   Sous-système 6 - No. pièce Log: -----------    Mat: 480 402 410 12
   Pièce: SideSensor_Pr  001 6149 
   No. de série: 3526502C50D0E4752076
   Codage: 2D2D2D

   Capteur de collision du sac gonflable frontal: côté conducteur: 
   Sous-système 7 - No. pièce Log: -----------    Mat: 480 401 610 12
   Pièce: FrontSensor_D  001 6149 
   No. de série: 3556502B90D19C35331A
   Codage: 2D2D2D

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 16: Volant multifonct. (J527)       Labels:| 5Q0-953-549.clb
   No. pièce Log: 5Q0 953 507 AM    Mat: 5Q0 953 549 A
   Pièce: Lenks. Modul  007 0070  
   Révision: --------    No. de série: 231012000300KK
   Codage: 1704
   No. Atelier: WSC 00000 000 00000
   Jeu de données ASAM: EV_SMLSKLOMQB 009001
   ROD: EV_SMLSKLOMQB_009_VW37.rod
   VCID: 015F7BD361830D3FC57-8054

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   No. pièce Log: 5G0 920 860 A    Mat: 5G0 920 860 A
   Pièce: KOMBI         236 0555  
   Codage: 0BAD02002380000803087E00040000
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_DashBoardVDDMQBAB 008026
   ROD: EV_DashBoardVDDMQBAB_008_VW37.rod
   VCID: 2615084FA86D0A07905-8072

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 19: Gateway CAN (J533)       Labels:| 5Q0-907-530-V1.clb
   No. pièce Log: 5Q0 907 530 D    Mat: 5Q0 907 530 D
   Pièce: GW MQB Low    120 1109  
   Révision: --------    No. de série: 0000160079
   Codage: 030000040B087300EF00004C080F00010001000000000000000000000000
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_GatewLear 006010
   ROD: EV_GatewLear_006.rod
   VCID: 323DE41F94A566A70CD-8066

   Alternateur: 

   Calculateur de surveillance de la batterie: 
   Sous-système 2 - No. pièce Log: 5Q0 915 181 C    Mat: 5Q0 915 181 C
   Pièce: J367-BDMHella  H03 8042 
   No. de série: 9099498401          

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 42: Porte conducteur (J386)       Labels:| 5QX-959-X93-42.clb
   No. pièce Log: 5Q0 959 393 A    Mat: 5Q0 959 393 A
   Pièce: TSG FS        H12 0006  
   No. de série: 13101200011534
   Codage: 003003208400048100001000
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_DCUDriveSideEWMINKLO 006003
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: 3D27C7235DFBA9DFE1F-8068

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 44: Direction assistée (J500)       Labels:| 5Q0-909-144.clb
   No. pièce Log: 5Q0 909 144 L    Mat: 5Q0 909 144 L
   Pièce: EPS_MQB_ZFLS  119 1021  
   Codage: 01
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_SteerAssisMQB 008022
   ROD: EV_SteerAssisMQB_008.rod
   VCID: 3D27C7235DFBA9DFE1F-8068

Aucun code défaut trouvé.

-------------------------------------------------------------------------------
Adresse 52: Porte passager (J387)       Labels:| 5QX-959-X92-52.clb
   No. pièce Log: 5Q0 959 392 A    Mat: 5Q0 959 392 A
   Pièce: TSG BFS       H12 0006  
   No. de série: 13101200010582
   Codage: 003001208C00048100801000
   No. Atelier: WSC 12345 123 61029
   Jeu de données ASAM: EV_DCUPasseSideEWMINKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: 3C21CA2746E1A0D7D61-8068

Aucun code défaut trouvé.

Fin----------(Temps écoulé: 00:54, VBatt début/fin: 13.2V/13.0V)-----------
 
Last edited by a moderator:
   #3  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
30,465
Reaction score
21,732
Location
USA
VCDS Serial number
HC100001
Hi and welcome.

Please use the standard English version of VCDS for posting data in this forum. You can download it from this page and it will happily coexist on your PC with the French version you are currently using.

Next, please post an Adaptation Channel map from your ABS module.
[Applications]
[Controller Channel Map]
Use "Single Controller Address", 03
Leave "Login or Security Access Code" blank
Select the Function: Adaptations
Select the Output: "CSV File​
[Go]

Post the resulting file here.

-Uwe-
 
   #4  

YanCT

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Location
Reunion Island
Thanks for the reply !

here is the file you asked me. Notice developer_adaptation_101 & 102 does not show up :(

Code:
	SW:5Q0-907-379-AC   HW:5Q0-907-379-D ---  ABS Brakes
	Component:ESC           H75 0437, Coding:01FA62A120220A710378060901C42580460450C06080A4F300480024C0
	EV_Brake1UDSContiMK100IPB,008020,EV_Brake1UDSContiMK100IPB_008_VW37.rod
	Monday,18,November,2019,00:06:15:41075
	VCDS Version: Release 19.6.2 (x64)  Data version: 20190930 DS308.0
	VCID: 7DA707231D7B69DFA21-8028
	
IDE00252-Brake system vacuum pump,0 ,1	
IDE00820-Activating and deactivating all development messages,0 ,1	
IDE03493-Driver door status,activated ,1	
IDE03659-Roller test bench mode,Manual activation: not possible ,1	
IDE04456-Brake disk drying,not activated ,1	
IDE04508-Hydraulic brake booster,0 ,1	
IDE04643-Overboost in brake system,activated ,1	
IDE04645-IDE05287-Electromechanical parking brake-Automatic application,not activated ,2	
IDE04645-MAS05667-Electromechanical parking brake-Driver presence recognition via brake pedal,not activated ,2	
IDE04765-Counter steer support,Strong ,1	
IDE04774-Vehicle and trailer stabilization,not activated ,1	
IDE04871-Dynamic starting assist,Early ,1	
IDE04939-Tire pressure monitoring display,1 ,1	
IDE04944-Brake pedal evaluation,activated ,1	
IDE04949-Engine drag torque control,activated ,1	
IDE04951-Brake booster,0 ,1	
IDE04952-Braking torque boost for distance regulation,0 ,1	
IDE05055-Hydraulic brake assistant,normal ,1	
IDE05057-Brake prefill,activated ,1	
IDE05161-Straight ahead brake stabilization,activated ,1	
IDE05263-AUTO HOLD functionality,not activated ,1	
IDE05264-AUTO HOLD increase threshold: reduced tensioning force,0 %,1	
IDE05265-AUTO HOLD increase threshold: full tensioning force,8 %,1	
IDE05337-Starting vibration reduction,normal ,1	
IDE05711-Automatic application during engine stalling,not activated ,1	
IDE06137-IDE04772-Monitoring of functional lights-Indicator light in the button for electromech. parking brake,0 ,2	
IDE06137-IDE05333-Monitoring of functional lights-Indicator light in AUTO HOLD button,0 ,2	
IDE06139-AUTO HOLD slippage recognition,activated ,1	
IDE06425-Roller test bench mode: functional,not activated ,1	
IDE06505-Electromechanical parking brake: delay level,4 ,1	
IDE07006-Tire pressure monitoring display: tire selection,1 ,1	
IDE07565-ABS in lower speed range,activated ,1	
IDE07848-Thresholds for brake performance,activated ,1	
MAS00122-Electronic Stability Program,activated ,1	
MAS00970-Running manufacturer number,not activated ,1	
MAS01180-AUTO HOLD functional status,Always active ,1	
MAS01299-Offroad,0 ,1	
MAS02080-XCP calibration protocol,not activated ,1	
MAS02138-Hill-start assistant,normal ,1	
MAS02666-Seat belt buckle scan,activated ,1	
ENG118148-Developer_Function_1,0 ,1	
	
	
Elapsed Time: 00:12
 
Last edited by a moderator:
   #5  

YanCT

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Location
Reunion Island
I installed VCDS in English as you requested and can now paste the fault code in english :

Code:
Monday,18,November,2019,00:19:01:41075
VCDS Version: Release 19.6.2 (x64) Running on Windows 10 x64
[url]www.Ross-Tech.com[/url]
WSC
                Address 03: ABS Brakes       Labels: 5Q0-907-379-IPB-V1.clb
Control Module Part Number: 5Q0 907 379 AC    HW: 5Q0 907 379 D
  Component and/or Version: ESC           H75 0437
           Software Coding: 01FA62A120220A710378060901C42580460450C06080A4F300480024C0
            Work Shop Code: WSC 01357 011 00200
              ASAM Dataset: EV_Brake1UDSContiMK100IPB 008020 (VW37)
                       ROD: EV_Brake1UDSContiMK100IPB_008_VW37.rod
                      VCID: 7DA707231D7B69DFA21-8028
1 Fault Found:

0394 - Function Shut-Off Active 
          C10C8 00 [137] - -
          [The function AYC+TCS or EDS were deactivated by adaption]
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 40
                    Mileage: 133220 km
                    Date: 2019.11.16
                    Time: 13:17:05
 
Last edited by a moderator:
   #6  

Uwe

Benevolent Dictator
Staff member
Joined
Jan 29, 2014
Messages
30,465
Reaction score
21,732
Location
USA
VCDS Serial number
HC100001
Hmm, I am not seeing the obvious answer there that I was hoping for. So at the moment, I'm scratching my head.

-Uwe-
 
   #8  

YanCT

New Member
Joined
Nov 17, 2019
Messages
6
Reaction score
0
Location
Reunion Island
By using code 24435 we can add a new line in adaptations map // but this code won't let me change it or get acces to _101.

Code:
	SW:5Q0-907-379-AC   HW:5Q0-907-379-D ---  ABS Brakes --- SA: 24435
	Component:ESC           H75 0437, Coding:01FA62A120220A710378060901C42580460450C06080A4F300480024C0
	EV_Brake1UDSContiMK100IPB,008020,EV_Brake1UDSContiMK100IPB_008_VW37.rod
	Monday,18,November,2019,00:44:47:41075
	VCDS Version: Release 19.6.2 (x64)  Data version: 20190930 DS308.0
	VCID: 7DA707231D7B69DFA21-8028
	
IDE00252-Brake system vacuum pump,0 ,1	
IDE00820-Activating and deactivating all development messages,0 ,1	
IDE03493-Driver door status,activated ,1	
IDE03659-Roller test bench mode,Manual activation: not possible ,1	
IDE04456-Brake disk drying,not activated ,1	
IDE04508-Hydraulic brake booster,0 ,1	
IDE04643-Overboost in brake system,activated ,1	
IDE04645-IDE05287-Electromechanical parking brake-Automatic application,not activated ,2	
IDE04645-MAS05667-Electromechanical parking brake-Driver presence recognition via brake pedal,not activated ,2	
IDE04765-Counter steer support,Strong ,1	
IDE04774-Vehicle and trailer stabilization,not activated ,1	
IDE04871-Dynamic starting assist,Early ,1	
IDE04939-Tire pressure monitoring display,1 ,1	
IDE04944-Brake pedal evaluation,activated ,1	
IDE04949-Engine drag torque control,activated ,1	
IDE04951-Brake booster,0 ,1	
IDE04952-Braking torque boost for distance regulation,0 ,1	
IDE05055-Hydraulic brake assistant,normal ,1	
IDE05057-Brake prefill,activated ,1	
IDE05161-Straight ahead brake stabilization,activated ,1	
IDE05263-AUTO HOLD functionality,not activated ,1	
IDE05264-AUTO HOLD increase threshold: reduced tensioning force,0 %,1	
IDE05265-AUTO HOLD increase threshold: full tensioning force,8 %,1	
IDE05337-Starting vibration reduction,normal ,1	
IDE05711-Automatic application during engine stalling,not activated ,1	
IDE06137-IDE04772-Monitoring of functional lights-Indicator light in the button for electromech. parking brake,0 ,2	
IDE06137-IDE05333-Monitoring of functional lights-Indicator light in AUTO HOLD button,0 ,2	
IDE06139-AUTO HOLD slippage recognition,activated ,1	
IDE06425-Roller test bench mode: functional,not activated ,1	
IDE06505-Electromechanical parking brake: delay level,4 ,1	
IDE07006-Tire pressure monitoring display: tire selection,1 ,1	
IDE07565-ABS in lower speed range,activated ,1	
IDE07848-Thresholds for brake performance,activated ,1	
MAS00122-Electronic Stability Program,activated ,1	
MAS00970-Running manufacturer number,not activated ,1	
MAS01180-AUTO HOLD functional status,Always active ,1	
MAS01299-Offroad,0 ,1	
MAS02080-XCP calibration protocol,not activated ,1	
MAS02138-Hill-start assistant,normal ,1	
MAS02666-Seat belt buckle scan,activated ,1	
ENG118148-Developer_Function_1,0 ,1	
ENG122614-Developer_Function_102,ASR function deactivation ,1	
	
	
Elapsed Time: 00:12
 
Last edited by a moderator:
Top